RLT830-200MGS / Roithner LaserTechnik GmbH

RLT830-200MGS Datasheet with Chat AI

Hello, Please ask a question about RLT830-200MGS Datasheet

# Example questions: ➢ What is the maximum allowable reverse voltage that can be applied to this laser diode?
➢ Which pin corresponds to the laser diode's anode and also serves as the cathode for the integrated photodiode?
➢ How does the operating temperature range affect the lifespan and stability of the rlt830-200mgs?

Part No.	RLT830-200MGS
Manufacturer	ROITHNER
Size	422 Kbytes
Pages	2 pages
Description	Infrared Laser Diode

Datasheet Summary with AI

## Optical Characteristics
️· Peak Wavelength: 825 - 845 nm (Typical 830 nm)
️· Spectral Width (FWHM): 2.0 nm
️· Beam Divergence (FWHM):
- Parallel: 8°
- Perpendicular: 28°

## Pin Configuration
️· Pin 1: LD Cathode
️· Pin 2: LD Anode, PD Cathode
️· Pin 3: PD Anode

## Precautions
️· Safety: Avoid direct exposure to laser light.
️· ESD: Use wrist straps and grounded work surfaces during handling.
️· Operating Considerations:
- Use a current source and regulated drive circuit.
- Employ proper heat sinking.
- Do not exceed maximum specifications.

# RLT830-200MGS Laser Diode

## Specifications
️· Type: Infrared Laser Diode
️· Wavelength: 830 nm
️· Optical Output Power: 200 mW
️· Mode: Single Transverse Mode
️· Package: TO18 (5.6 mm) with integrated Photodiode (PD)

## Electrical Characteristics
️· Reverse Voltage: 2 V
️· Operating Temperature: -20 to +50 °C
️· Storage Temperature: -40 to +80 °C
️· Operating Voltage: 2.5 - 3.0 V
️· Threshold Current: 45 - 70 mA
️· Operating Current: 250 - 280 mA
️· Slope Efficiency: 0.75 - 0.85 W/A
️· PD Current: 0.5 mA
️· PD Reverse Voltage: 25 V

## Optical Characteristics
️· Peak Wavelength: 825 - 845 nm (Typical 830 nm)
️· Spectral Width (FWHM): 2.0 nm
️· Beam Divergence (FWHM):
- Parallel: 8°
- Perpendicular: 28°

## Pin Configuration
️· Pin 1: LD Cathode
️· Pin 2: LD Anode, PD Cathode
️· Pin 3: PD Anode

## Precautions
️· Safety: Avoid direct exposure to laser light.
️· ESD: Use wrist straps and grounded work surfaces during handling.
️· Operating Considerations:
- Use a current source and regulated drive circuit.
- Employ proper heat sinking.
- Do not exceed maximum specifications.