| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
The question interval is too short.
Please try again in a few seconds.
Hello, Please ask a question about ES1AF Datasheet
# Example questions:
➢ What test conditions are used to measure reverse recovery time?
➢ What is the typical thermal resistance (rθja) value for pcb mounted devices with a 0.2x0.2mm copper pad?
➢ What is the operating junction and storage temperature range for these diodes?
1. Document Type and Subject:
️· This appears to be a datasheet or technical specification sheet for a series of diodes, likely silicon rectifier diodes. The series appears to be "ES1A-F" through "ES1J-F".
2. Physical Characteristics:
️· Weight: Not explicitly stated, but assumed to be lightweight based on common diode characteristics.
️· Dimensions: Not provided.
️· Polarity: Indicated by the anode and cathode markings, typical for diodes.
3. Electrical Characteristics (Key Parameters):
️· Repetitive Peak Reverse Voltage (VRRM): Ranges from 50V to 300V (depending on the specific model ES1A-F to ES1J-F).
️· Average Rectifier Forward Current (IF): 1A (appears consistent across the series)
️· Non-Repetitive Peak Forward Current (IFNM): Not provided.
️· Maximum Reverse Recovery Time (trr): 300 µs (This is a specification)
️· Maximum Junction Temperature (TJ): 100°C, 25°C
️· Reverse Recovery Condition: IF = 0.5A, IR = 1.0A, Irr = 0.25A (This is a specific test setup)
️· Capacitance (C): 15pF
️· Thermal Resistance (RθJA): 60.0°C/W (for a typical mounting scenario with a 0.2x0.2 inch copper pad area)
4. Operating Conditions:
️· Storage Temperature Range: -50°C to +150°C.
️· Duty Cycle: "LSE" - Likely means "Low Self-Excitation" or a similar operational mode depending on the intended application.
️· Waveform: Single Phase, Half Wave, Resistive/Inductive 60 Hz load.
️· Reverse Voltage Duty : Not Specified
5. Testing Conditions:
️· Non-Repetitive Peak Forward Current Test: Per JE DEC method.
️· Capacitance Measurement: 1 MHz applied reverse voltage 4.0V DC.
6. Notes & Abbreviations:
️· JE DEC: A referenced test method.
️· TJ: Junction Temperature.
️· RθJA: Thermal Resistance Junction to Ambient.
️· LSE: Low Self-Excitation
7. Formatting Issues:
️· The document is heavily formatted with strikethroughs and incomplete phrases, indicating either a draft document, heavily edited document, or corrupted text. This makes deciphering the complete information extremely difficult. The text is organized in a tabular format, but many of the columns are either unreadable or contain nonsensical content.
1. Document Type and Subject:
️· This appears to be a datasheet or technical specification sheet for a series of diodes, likely silicon rectifier diodes. The series appears to be "ES1A-F" through "ES1J-F".
2. Physical Characteristics:
️· Weight: Not explicitly stated, but assumed to be lightweight based on common diode characteristics.
️· Dimensions: Not provided.
️· Polarity: Indicated by the anode and cathode markings, typical for diodes.
3. Electrical Characteristics (Key Parameters):
️· Repetitive Peak Reverse Voltage (VRRM): Ranges from 50V to 300V (depending on the specific model ES1A-F to ES1J-F).
️· Average Rectifier Forward Current (IF): 1A (appears consistent across the series)
️· Non-Repetitive Peak Forward Current (IFNM): Not provided.
️· Maximum Reverse Recovery Time (trr): 300 µs (This is a specification)
️· Maximum Junction Temperature (TJ): 100°C, 25°C
️· Reverse Recovery Condition: IF = 0.5A, IR = 1.0A, Irr = 0.25A (This is a specific test setup)
️· Capacitance (C): 15pF
️· Thermal Resistance (RθJA): 60.0°C/W (for a typical mounting scenario with a 0.2x0.2 inch copper pad area)
4. Operating Conditions:
️· Storage Temperature Range: -50°C to +150°C.
️· Duty Cycle: "LSE" - Likely means "Low Self-Excitation" or a similar operational mode depending on the intended application.
️· Waveform: Single Phase, Half Wave, Resistive/Inductive 60 Hz load.
️· Reverse Voltage Duty : Not Specified
5. Testing Conditions:
️· Non-Repetitive Peak Forward Current Test: Per JE DEC method.
️· Capacitance Measurement: 1 MHz applied reverse voltage 4.0V DC.
6. Notes & Abbreviations:
️· JE DEC: A referenced test method.
️· TJ: Junction Temperature.
️· RθJA: Thermal Resistance Junction to Ambient.
️· LSE: Low Self-Excitation
7. Formatting Issues:
️· The document is heavily formatted with strikethroughs and incomplete phrases, indicating either a draft document, heavily edited document, or corrupted text. This makes deciphering the complete information extremely difficult. The text is organized in a tabular format, but many of the columns are either unreadable or contain nonsensical content.
| Part No. | ES1AF |
| Manufacturer | YIXIN |
| Size | 128 Kbytes |
| Pages | 2 pages |
| Description | SURFACE MOUNT SUPER FAST RECTIFIER |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |