M24C04-BN6 / STMicroelectronics - Datasheet(PDF) Chat AI

M24C04-BN6 Datasheet with Chat AI

Hello, Please ask a question about M24C04-BN6 Datasheet

# Example questions: ➢ The text mentions a 7-bit device select code. what is used to set the value of the least significant bits of this code?
➢ What precaution must be taken when handling eeprom dice delivered in wafer form or in wlcsp packages, and why?
➢ What happens if the write control (wc) input is driven high during a write operation?

Part No.	M24C04-BN6
Manufacturer	STMICROELECTRONICS
Size	453 Kbytes
Pages	38 pages
Description	16 Kbit, 8 Kbit, 4 Kbit, 2 Kbit and 1 Kbit serial I²C bus EEPROM

Datasheet Summary with AI

Okay, here's a summary of the provided text, focusing on the key information about the M24C16, M24C08, M24C04, M24C02, and M24C01 EEPROM devices:

Key Features & Overview:

️· EEPROM: These are electrically erasable programmable read-only memory devices.
️· Organization: Available in different sizes: 2048 x 8, 1024 x 8, 512 x 8, 256 x 8, and 128 x 8 bits.
️· Interface: Uses a 2-wire I²C serial interface (SDA and SCL).
️· Device Type Identifier: Includes a 4-bit Device Type Identifier (1010) for I²C compatibility.
️· Slave Device: Operates as a slave in the I²C protocol.

Signal Descriptions:

️· SCL (Serial Clock): Input signal for synchronizing data transfer. Requires a pull-up resistor.
️· SDA (Serial Data): Bidirectional data line. Requires a pull-up resistor.
️· E0, E1, E2 (Chip Enable): Inputs used to define the device select code. Can be tied to VCC or VSS. If left floating, they're read as low (0).
️· WC (Write Control): Input used to disable write operations for data protection. Can be tied to VCC or VSS. If left floating, writes are enabled.

Important Considerations:

️· UV Sensitivity: Devices in wafer form or WLCSP packaging are sensitive to ultraviolet (UV) light, which can cause data loss.

️· Pull-up Resistors: Required on both SDA and SCL lines.
️· Device Select Code: Determined by the state of the E0, E1, and E2 inputs.

In essence, the document provides a high-level overview of these EEPROM devices, focusing on their key features, signal descriptions, and important considerations for their implementation.

Key Features & Overview:

️· EEPROM: These are electrically erasable programmable read-only memory devices.
️· Organization: Available in different sizes: 2048 x 8, 1024 x 8, 512 x 8, 256 x 8, and 128 x 8 bits.
️· Interface: Uses a 2-wire I²C serial interface (SDA and SCL).
️· Device Type Identifier: Includes a 4-bit Device Type Identifier (1010) for I²C compatibility.
️· Slave Device: Operates as a slave in the I²C protocol.

Signal Descriptions:

️· SCL (Serial Clock): Input signal for synchronizing data transfer. Requires a pull-up resistor.
️· SDA (Serial Data): Bidirectional data line. Requires a pull-up resistor.
️· E0, E1, E2 (Chip Enable): Inputs used to define the device select code. Can be tied to VCC or VSS. If left floating, they're read as low (0).
️· WC (Write Control): Input used to disable write operations for data protection. Can be tied to VCC or VSS. If left floating, writes are enabled.

Important Considerations:

️· UV Sensitivity: Devices in wafer form or WLCSP packaging are sensitive to ultraviolet (UV) light, which can cause data loss.
️· Pull-up Resistors: Required on both SDA and SCL lines.
️· Device Select Code: Determined by the state of the E0, E1, and E2 inputs.

In essence, the document provides a high-level overview of these EEPROM devices, focusing on their key features, signal descriptions, and important considerations for their implementation.