I. General Characteristics (Table 2 - Page 4)

Parameter	Conditions	AR Grade (Min Typ Max)	BR Grade (Min Typ Max)	Unit
Operating Temperature Range	Specified Performance	-40	+85	-40	+125	°C
Temperature Range	Specified Performance	-40	+85	-40	+125	°C
Common-Mode Rejection Ratio (CMRR)	G = 1, VCM = -10V to +10V	80	-	dB
CMRR	G = 10, VCM = -10V to +10V	100	-	dB
CMRR	G = 100, VCM = -10V to +10V	120	-	dB
CMRR	G = 1000, VCM = -10V to +10V	130	-	dB
CMRR at 10 kHz	G = 1	80	-	dB
CMRR at 10 kHz	G = 10	90	-	dB
CMRR at 10 kHz	G = 100	100	-	dB
CMRR at 10 kHz	G = 1000	100	-	dB

II. Electrical Characteristics (ARM Grade - Page 5)

Parameter	Conditions	ARM Grade (Min Typ Max)	Unit
Voltage Noise, 1 kHz	Input Voltage Noise (eNI)	8	nV/√Hz
Voltage Noise	Output Voltage Noise (eNO)	75	nV/√Hz
Voltage Noise	RTI = √(eNI² + (eNO/G)²)	-	-
Current Noise	f = 1 kHz	2	µV p-p
Noise	f = 0.1 Hz to 10 Hz	0.5	µV p-p
Noise	f = 0.1 Hz to 10 Hz	0.25	µV p-p
Input Bias Current (Over Temperature)	Average TC	0.5	nA
Input Offset Current (Over Temperature)	Average TC	0.3	nA
Input Offset Current (Over Temperature)	Average TC	1	nA
Input Bias Current (Over Temperature)	Average TC	1.5	nA
Output Bias Current (Over Temperature)	Average TC	3	nA

III. Input Characteristics (Table 1 - Page 5)

Parameter	Conditions	ARM Grade (Min Typ Max)	Unit
Input Bias Current (Over Temperature)	T = -40°C to +85°C	0.5	nA
Input Offset Current (Over Temperature)	T = -40°C to +85°C	3	nA
Input Offset Current (Average TC)	T = -40°C to +85°C	1	nA
Input Bias Current (Average TC)	T = -40°C to +85°C	1.5	nA
Input Offset Current (Average TC)	T = -40°C to +85°C	1	nA

IV. Other Key Parameters & Notes

️· Notes 1 & 2: These refer to voltage offset calculations and the effect of external resistors, respectively.
️· Note 3: Describes the condition for voltage offset.
️· Note 1: Voltage offset calculation.
️· Note 1: The PSR relates to power supply rejection ratio.

Important Considerations:

️· "-" in Tables: A "-" in a table typically indicates that a specific value is not specified for that grade (AR or BR).
️· Grade Differences: Pay attention to the AR and BR grade differences; not all specifications are provided for both grades.
️· Units: Ensure you understand the units associated with each parameter.