1. Overview & Product Type:

️· Product Category: RF Coaxial Connectors
️· Specific Type: SMB (Subminiature Version B) connectors, Mini 75 Ohm. These are smaller, 75-ohm connectors intended for miniaturization and high-density applications.

2. Key Features & Benefits (From "Product Facts"):

️· Miniaturization: Designed for small, compact circuits.
️· Snap-Fit Coupling: Quick connect/disconnect.
️· High-Density Applications: Suitable for crowded circuit boards.
️· Easy Cable Assembly: Designed for relatively simple assembly.
️· Low VSWR: Good signal integrity.
️· Consistent Mating Forces: Reliable connection.
️· Crimp Termination: Uses crimp centers and hex crimps.
️· Cost-Effective: Lower cost compared to larger connectors.

3. Electrical and Mechanical Characteristics (From "Electrical Characteristics" and "Mechanical Characteristics"):

️· Impedance: 75 ohms
️· Frequency Range: Up to 4.0 GHz
️· Insulation Resistance: 1000 megohms
️· Contact Current Rating: 1.5 amps DC max.
️· Engagement Force: Initial - 14.0 lbs; after 500 matings - 14.0 lbs.
️· Durability: 500 cycles

4. Connector Types & Part Numbers (Detailed listings):

The document lists several connector types with corresponding part numbers:

️· Straight Plug: For direct connections. (Part numbers: 5415484-1, 5415484-2, 5415484-3)
️· Right-Angle Plug: For 90-degree connections. (Part numbers: 5415487-1, 5415487-2, 5415487-3)
️· Bulkhead Jack: A jack connector designed for panel mounting. (Part number: 415500-1)
️· Front Mount and Rear Mount: Described with their part numbers.

5. Cable Compatibility:

️· Connectors are listed with compatibility for RG 179, RG 187, and RD 179 cables.

6. Important Notes:

️· Part numbers listed are subject to RoHS compliance exceptions.
️· The document references standard military, commercial, and Tyco Electronics tooling can be used for termination.
️· Dimensions are provided, often with both metric and imperial measurements.