| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
PCI4510 Datasheet(PDF) 101 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
PCI4510 Datasheet(HTML) 101 Page - Texas Instruments |
|
101 / 220 page ![]() 4−29 4.42 Power Management Control/Status Register The power management control/status register determines and changes the current power state of the PCI4510 CardBus function. The contents of this register are not affected by the internally generated reset caused by the transition from the D3hot to D0 state. See Table 4−20 for a complete description of the register contents. All PCI registers, ExCA registers, and CardBus registers are reset as a result of a D3hot-to-D0 state transition, with the exception of the PME context bits (if PME is enabled) and the GRST only bits. Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Name Power management control/status Type RWC R R R R R R RW R R R R R R RW RW Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Register: Power management control/status Offset: A4h (Function 0) Type: Read-only, Read/Write, Read/Write/Clear Default: 0000h Table 4−20. Power Management Control/Status Register Description BIT SIGNAL TYPE FUNCTION 15 PMESTAT RC PME status. This bit is set when the CardBus function would normally assert the PME signal, independent of the state of the PME_EN bit. This bit is cleared by a writeback of 1, and this also clears the PME signal if PME was asserted by this function. Writing a 0 to this bit has no effect. 14−13 DATASCALE R This 2-bit field returns 0s when read. The CardBus function does not return any dynamic data. 12−9 DATASEL R Data select. This 4-bit field returns 0s when read. The CardBus function does not return any dynamic data. 8 PME_ENABLE RW This bit enables the function to assert PME. If this bit is cleared, then assertion of PME is disabled. This bit is not cleared by the assertion of PRST. It is only cleared by the assertion of GRST. 7−2 RSVD R Reserved. These bits return 0s when read. 1−0 PWRSTATE RW Power state. This 2-bit field is used both to determine the current power state of a function and to set the function into a new power state. This field is encoded as: 00 = D0 01 = D1 10 = D2 11 = D3hot |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |