| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
PIC18F4331 Datasheet(PDF) 259 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F4331 Datasheet(HTML) 259 Page - Microchip Technology |
|
259 / 396 page ![]() 2003 Microchip Technology Inc. Preliminary DS39616B-page 257 PIC18F2331/2431/4331/4431 20.9 A/D Conversions Figure 20-3 shows the operation of the A/D converter after the GO bit has been set and the ACQT2:ACQT0 bits are cleared. A conversion is started after the follow- ing instruction to allow entry into Sleep mode before the conversion begins. The internal A/D RC oscillator must be selected to perform a conversion in Sleep. Figure 20-4 shows the operation of the A/D converter after the GO bit has been set and the ACQT3:ACQT0 bits are set to ‘010’, and selecting a 4 TAD acquisition time before the conversion starts. Clearing the GO/DONE bit during a conversion will abort the current conversion. The resulting buffer loca- tion will contain the partially completed A/D conversion sample. This will not set the ADIF flag, therefore, the user must read the buffer location before a conversion sequence overwrites it. After the A/D conversion is completed or aborted, a 2TAD wait is required before the next acquisition can be started. After this wait, acquisition on the selected channel is automatically started. FIGURE 20-3: A/D CONVERSION TAD CYCLES (ACQT<2:0> = 000, TACQ = 0) FIGURE 20-4: A/D CONVERSION TAD CYCLES (ACQT<3:0> = 0010, TACQ = 4 TAD) Note: The GO/DONE bit should NOT be set in the same instruction that turns on the A/D. TAD1 TAD2 TAD3 TAD4 TAD5 TAD6 TAD7 TAD8 TAD11 TAD9 TAD10 Go bit cleared on the rising edge of Q1 after the first Q3 Conversion Starts b2 b8 b7 b6 b5 b4 b3 b9 b1 b0 following TAD11(1), and result buffer is loaded. GO bit is set, and holding cap is disconnected from analog input Note 1: Conversion time is a minimum of 11 TAD + 2 TCY, and a maximum of 11 TAD + 6 TCY. A/D triggered (Holding capacitor is disconnected) 1 2 3 4 TACQT Cycles Automatic Acquisition Time TAD1 TAD2 TAD3 TAD4 TAD5 TAD6 TAD7 TAD8 TAD11 TAD9 TAD10 Go bit cleared on the rising edge of Q1 after the first Q3 Conversion Starts b2 b8 b7 b6 b5 b4 b3 b9 b1 b0 following TAD11(1) and result buffer is loaded. TAD Cycles Note 1: In continuous modes, next conversion starts at the end of TAD12. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |