| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
PIC18F4331 Datasheet(PDF) 348 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F4331 Datasheet(HTML) 348 Page - Microchip Technology |
|
348 / 396 page ![]() PIC18F2331/2431/4331/4431 DS39616B-page 346 Preliminary 2003 Microchip Technology Inc. Supply Current (IDD)(2,3) PIC18LF2X31/4X31 35 50 µA -40°C FOSC = 1 MHz (PRI_IDLE mode, EC oscillator) 35 50 µA 25°C VDD = 2.0V 35 60 µA 85°C PIC18LF2X31/4X31 55 80 µA -40°C 50 80 µA 25°C VDD = 3.0V 60 100 µA 85°C All devices 105 150 µA -40°C 110 150 µA 25°C VDD = 5.0V 115 150 µA 85°C PIC18LF2X31/4X31 135 180 µA -40°C FOSC = 4 MHz (PRI_IDLE mode, EC oscillator) 140 180 µA 25°C VDD = 2.0V 140 180 µA 85°C PIC18LF2X31/4X31 215 280 µA -40°C 225 280 µA 25°C VDD = 3.0V 230 280 µA 85°C All devices 410 525 µA -40°C 420 525 µA 25°C VDD = 5.0V 430 525 µA 85°C All devices 3.2 4.1 mA -40°C FOSC = 40 MHz (PRI_IDLE mode, EC oscillator) 3.2 4.1 mA 25°C VDD = 4.2 V 3.3 4.1 mA 85°C All devices 4.0 5.1 mA -40°C 4.1 5.1 mA 25°C VDD = 5.0V 4.1 5.1 mA 85°C 25.2 DC Characteristics: Power-Down and Supply Current PIC18F2331/2431/4331/4431 (Industrial, Extended) PIC18LF2331/2431/4331/4431 (Industrial) (Continued) PIC18F2331/2431/4331/4431 (Industrial, Extended) Standard Operating Conditions (unless otherwise stated) Operating temperature -40°C ≤ TA ≤ +85°C for industrial PIC18LF2331/2431/4331/4431 (Industrial) Standard Operating Conditions (unless otherwise stated) Operating temperature -40°C ≤ TA ≤ +85°C for industrial Param No. Device Typ Max Units Conditions Legend: Shading of rows is to assist in readability of the table. Note 1: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS, and all features that add delta current disabled (such as WDT, Timer1 Oscillator, BOR, etc.). 2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements in active Operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT enabled/disabled as specified. 3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k Ω. 4: Standard low cost 32 kHz crystals have an operating temperature range of -10°C to +70°C. Extended temperature crystals are available at a much higher cost. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |