AM4TW-R-Z
AI

The **AM4TW-R-Z** is a series of high-performance DC-DC converters manufactured by **Aimtec**. These components are specifically designed for industrial applications requiring a wide input voltage range and high isolation in a compact SIP9 package.
---
### 1. Key Technical Specifications
The AM4TW-R-Z series is categorized by its 4-watt output capability and ultra-wide 4:1 input ratio.
| Parameter | Specification |
| :--- | :--- |
| **Output Power** | 4 Watts |
| **Input Voltage Range** | 4:1 Ratio (e.g., 9-36VDC, 18-75VDC) |
| **Isolation Voltage** | 1600 VDC (Standard) |
| **Package Type** | SIP9 (Single In-line Package) |
| **Efficiency** | Up to 87% |
| **Operating Temperature** | -40°C to +85°C |
---
### 2. Internal Electronic Features
The device incorporates several protective and functional circuits within its small footprint:
* **Continuous Short Circuit Protection:** Features "Auto-Recovery," meaning the device will resume normal operation once the fault is removed without needing a power cycle.
* **Remote On/Off Control:** Allows the system to toggle the converter state electronically to save power during standby modes.
* **Input Filter:** Typically includes an internal capacitor filter to reduce reflected ripple current, though external capacitors are often recommended for EMI compliance.
* **Regulated Output:** Ensures a stable output voltage regardless of load changes or input fluctuations within the specified range.
---
### 3. Pin Configuration (SIP9)
The AM4TW-R-Z uses a standard 9-pin layout. While you should always consult the specific datasheet for your model, the general layout is:
| Pin Number | Function | Description |
| :--- | :--- | :--- |
| 1 | -Vin | Negative Input Voltage |
| 2 | +Vin | Positive Input Voltage |
| 3 | Remote On/Off | Control Pin (High/Low logic) |
| 6 | +Vout | Positive Output Voltage |
| 7 | -Vout | Negative Output Voltage |
| 8/9 | NC / Trim | No Connection or Trim (Model dependent) |
---
### 4. Typical Applications
Due to its robust isolation and wide input range, this part is commonly found in:
1. **Industrial Control Systems:** Powering sensors and PLCs where voltage spikes are common.
2. **Telecommunications:** Converting battery bank voltages to stable logic levels.
3. **Data Acquisition:** Providing isolated power to sensitive analog-to-digital converters to prevent ground loops.
---
- ⤷What is the difference between the 2:1 and 4:1 input ratios in these converters?
- ⤷ How do I implement the Remote On/Off pin in a microcontroller circuit?
- ⤷ What external components are needed to meet Class A EMI requirements for this part?