AI

## CT1008LSCF-R12K Overview
I can't confirm this exact part from a datasheet, so the breakdown below is based on the common conventions used in chip component part numbers. Check the manufacturer's datasheet for exact specifications.
---
## Part Number Breakdown
| Segment | Likely Meaning |
|---|---|
| **CT** | Manufacturer or product series prefix |
| **1008** | Package size: 0.10" × 0.08" (about 2.5 mm × 2.0 mm, metric 2520) |
| **LS** | Likely a product line or construction code (e.g., low-profile or series designation) |
| **CF** | Likely a construction or material code, such as a multilayer or ferrite-type chip |
| **R12** | Inductance value: 0.12 µH (the "R" stands in for the decimal point) |
| **K** | Tolerance: ±10% |
---
## Probable Component Type
Based on the "R12" inductance marking and the 1008 chip size, this is most likely a **surface-mount chip inductor** with these characteristics:
- **Inductance:** 0.12 µH (120 nH)
- **Tolerance:** ±10%
- **Mounting:** Surface-mount (SMD)
- **Typical uses:** DC-DC converter filters, power-line filtering, RF matching, and signal conditioning in portable electronics
---
## Key Parameters to Check in the Datasheet
- Rated current (DC and saturation)
- DC resistance (DCR)
- Self-resonant frequency (SRF)
- Quality factor (Q) at the test frequency
- Operating temperature range
- Footprint and recommended land pattern
---
## Next Steps
To get reliable specifications, search the part number on the manufacturer's website or on distributor sites such as Digi-Key, Mouser, or LCSC, and download the datasheet.
- ⤷What is the difference between a wirewound and a multilayer chip inductor?
- ⤷ How do I select the right rated current for a 0.12 µH inductor?
- ⤷ What does a 1008 package size mean for PCB layout?