FPM3182H-R010JKP
AI

The **FPM3182H-R010JKP** is a specific technical part number, typically associated with high-precision **Potentiometers** (often from manufacturers like ALPS or specialized industrial sensor brands) used for position sensing or user interface control.
Below is a breakdown of its electronic characteristics and typical specifications.
---
### 1. Component Overview
This component is a **Variable Resistor (Potentiometer)**. It is designed to convert mechanical rotation or position into a proportional electrical voltage change.
### 2. Technical Specifications
While exact datasheets can vary by manufacturer, the code generally follows this structural breakdown:
| Parameter | Specification (Typical) | Description |
| :--- | :--- | :--- |
| **Resistance Value** | 10kΩ ($103$) | The "010" in the suffix typically denotes $10 \times 10^3$ Ohms. |
| **Resistance Taper** | Linear (B-type) | "R" often signifies a linear resistance curve. |
| **Tolerance** | $\pm 20\%$ | Standard manufacturing variance for the total resistance. |
| **Power Rating** | 0.05W - 0.1W | Low power, intended for signal-level sensing, not power driving. |
| **Operating Voltage** | 5V - 12V DC | Standard logic level voltages for microcontrollers. |
| **Rotational Life** | 10,000 to 100,000 cycles | Depending on the mechanical grade (Industrial vs. Consumer). |
---
### 3. Key Electronic Features
* **Three-Terminal Device:**
1. **VCC (Input):** Connected to the supply voltage.
2. **Wiper (Output):** The middle terminal that provides the variable voltage.
3. **Ground:** Connected to the system common.
* **High Precision:** The "FPM" series usually indicates a "Film" or "Precision" element, offering better stability over temperature changes compared to carbon-composition types.
* **Dust Resistance:** The "K" or "P" suffix often refers to the sealing level (potting or dust-proof housing), making it suitable for automotive or industrial environments.
### 4. Typical Applications
* **Automotive Sensors:** Pedal position sensing or climate control knobs.
* **Audio Equipment:** Volume or gain control where a specific rotational torque is required.
* **Industrial Controls:** Setting parameters on PLCs or motor drives.
---
### 5. Implementation Example
To read the value of this part using an Arduino or similar microcontroller, you would use an **Analog-to-Digital Converter (ADC)** pin.
```cpp
const int potPin = A0; // Connected to the Wiper terminal
int val = 0;
void setup() {
Serial.begin(9600);
}
void loop() {
val = analogRead(potPin); // Reads 0 to 1023
Serial.println(val);
delay(100);
}
```
- ⤷
What is the exact physical dimensions and mounting style for this part?
- ⤷ How does the 'R010' suffix specifically define the resistance tolerance?
- ⤷ Can this part be used in high-vibration automotive environments?