FPM4184H-R010FAR
AI

The **FPM4184H-R010FAR** is a high-precision, low-resistance **Current Sense Resistor** (Shunt Resistor). These components are critical in power management systems to monitor current flow by measuring the voltage drop across a known resistance.
---
## 1. Technical Specifications
The following table summarizes the primary electrical and physical characteristics of this part:
| Parameter | Specification |
| :--- | :--- |
| **Resistance Value** | 10 mΩ (0.010 Ohms) |
| **Power Rating** | Typically 3W - 5W (Depending on thermal management) |
| **Tolerance** | ±1% (F-Grade) |
| **Temperature Coefficient (TCR)** | ±50 ppm/°C or better |
| **Technology** | Metal Plate / Manganin Alloy |
| **Package Style** | Surface Mount (SMD) - High Power 4320/4184 metrics |
| **Operating Temperature** | -55°C to +170°C |
---
## 2. Key Electronic Features
### A. Low Resistance (10mΩ)
The extremely low resistance value minimizes power loss ($P = I^2 R$) and prevents excessive heat generation, making it ideal for high-current sensing without significantly dropping the supply voltage.
### B. Metal Plate Construction
Unlike standard thick-film resistors, this part uses a solid metal alloy (often Manganin or Ni-Cr). This provides:
* **Superior Pulse Loading:** Can handle short-term current spikes.
* **High Stability:** Maintains resistance accuracy over long periods of use.
### C. Low Inductance
The physical design is "non-inductive," which is crucial for high-frequency switching power supplies. High inductance would cause measurement errors during rapid current changes.
---
## 3. Common Applications
This part is typically found in the "Power Path" of electronic circuits:
1. **Battery Management Systems (BMS):** Monitoring charge and discharge cycles in Li-ion battery packs.
2. **Motor Control:** Providing feedback to the controller to prevent over-current conditions and manage torque.
3. **DC-DC Converters:** Sensing output current for regulation and protection.
4. **Automotive Electronics:** Used in ADAS modules and power steering systems due to high reliability.
---
## 4. Typical Circuit Implementation
In a standard application, the resistor is placed in series with the load. A **Current Sense Amplifier** or a microcontroller's ADC (Analog-to-Digital Converter) measures the differential voltage across the terminals.
```c
// V_out = I_load * R_shunt
// If I_load = 10A and R_shunt = 0.010 Ohms:
// V_out = 10 * 0.010 = 100mV
```
---
- ⤷What is the maximum current this resistor can handle based on its power rating?
- ⤷ What are the recommended PCB layout practices for 4-terminal sensing with this part?
- ⤷ How does the TCR (Temperature Coefficient) affect measurement accuracy in high-heat environments?