HLMP-AL11-R0RYY
AI

The **HLMP-AL11-R0RYY** is a high-performance, precision optical grade LED manufactured by Broadcom (formerly Avago Technologies). It belongs to the **HLMP-Ax11** series, which are characterized by their T-1 ¾ (5mm) oval-shaped package and high brightness.
---
### 1. Key Technical Specifications
Below are the primary electronic and optical characteristics of the HLMP-AL11-R0RYY:
| Parameter | Value / Description |
| :--- | :--- |
| **LED Type** | Standard Through-Hole (T-1 ¾) |
| **Color** | Amber (Orange) |
| **Peak Wavelength** | ~590 nm |
| **Luminous Intensity** | 460 mcd (Min) to 1200 mcd (Max) |
| **Viewing Angle** | 30° x 70° (Oval/Elliptical) |
| **Forward Current ($I_F$)** | 20 mA (Typical) |
| **Forward Voltage ($V_F$)** | 2.1V to 2.4V (Typical) |
| **Lens Appearance** | Tinted, Non-diffused |
---
### 2. Physical and Material Composition
This part is designed specifically for outdoor applications where visibility under sunlight is critical.
* **Technology:** Uses **AllnGaP** (Aluminum Indium Gallium Phosphide) die technology. This provides high luminous efficiency and stable light output over long periods.
* **Package Shape:** The **Oval** lens design is intentional. It creates a wide horizontal viewing angle and a narrow vertical viewing angle, which is ideal for signs where viewers are spread out left-to-right but consistent in height (e.g., highway signs).
* **Encapsulation:** The epoxy used is UV resistant, reducing the degradation caused by long-term exposure to direct sunlight.
---
### 3. Electronic Design Considerations
When integrating the HLMP-AL11-R0RYY into a circuit, keep the following electronic constraints in mind:
#### Current Limiting
To prevent burnout, a series resistor must be used. You can calculate the resistor value ($R$) using Ohm's Law:
```cpp
R = (V_source - V_forward) / I_forward
```
*Example:* With a 5V supply and 20mA current:
`R = (5V - 2.1V) / 0.02A = 145 Ohms`
#### Thermal Management
While these LEDs are efficient, they are sensitive to heat. The leads should be kept at a distance from the body during soldering to prevent internal damage to the AllnGaP chip.
---
### 4. Common Applications
* **Variable Message Signs (VMS):** Highway and traffic information boards.
* **Commercial Advertising:** Outdoor billboards and electronic signs.
* **Solar Powered Signs:** Due to high luminous efficacy (high light output per watt).
* **Passenger Information:** Bus and train station displays.
- ⤷
What is the significance of the 'Oval' viewing angle in traffic applications?
- ⤷ Can this LED be driven by a PWM signal for dimming purposes?
- ⤷ What are the storage temperature limits for the HLMP-AL11 series?