Motor de Búsqueda de Datasheet de Componentes Electrónicos
  Mexican  ▼
ALLDATASHEET.COM.MX

X  

  • LM78M05CT...

  • AI
    ## Technical Overview: LM78M05CT The **LM78M05CT** is a popular three-terminal positive voltage regulator. It belongs to the 78xx series, specifically the medium-power "M" variants, designed to provide a stable +5V output for electronic circuits. --- ### 1. Key Technical Specifications | Parameter | Specification | | :--- | :--- | | **Output Voltage** | +5.0 V | | **Input Voltage (Min - Max)** | 7.5 V - 35 V | | **Maximum Output Current** | 500 mA (0.5A) | | **Quiescent Current** | ~4 mA - 6 mA | | **Package Type** | TO-220 (Through-Hole) | | **Operating Temperature** | 0°C to +125°C | --- ### 2. Functional Characteristics The "78M05" designation breaks down as follows: * **78**: Positive voltage regulator series. * **M**: Medium current (up to 500mA). Note that the standard 7805 handles 1A, while the 78L05 handles 100mA. * **05**: Fixed output voltage of 5 Volts. * **CT**: Typically refers to the package type (TO-220) and the temperature range. #### Internal Protection Features: 1. **Thermal Overload Protection:** Shuts down the IC if it gets too hot to prevent permanent damage. 2. **Short Circuit Current Limiting:** Limits the current output if the load shorts. 3. **Safe Area Compensation:** Ensures the internal output transistor operates within safe limits. --- ### 3. Pinout Configuration (TO-220 Package) Looking at the front of the chip (labeled side, pins pointing down): | Pin Number | Name | Function | | :--- | :--- | :--- | | 1 | **INPUT** | Unregulated DC voltage (7.5V to 35V) | | 2 | **GROUND** | Common ground for both input and output | | 3 | **OUTPUT** | Regulated +5V output | --- ### 4. Basic Application Circuit To ensure stability and reduce noise, external capacitors are highly recommended. ```c Unregulated Regulated DC Input (Vin) DC Output (+5V) o-----------[ LM78M05CT ]-----------o | In Out | + | GND | + C1(0.33uF) +------|------+ C2(0.1uF) - | - o------------------+----------------o Ground ``` * **C1 (Input Capacitor):** Required if the regulator is located far from the power supply filter. Usually 0.33µF Ceramic. * **C2 (Output Capacitor):** Improves transient response and stability. Usually 0.1µF Ceramic or 10µF Electrolytic. --- ### 5. Common Use Cases * **Microcontroller Power:** Providing a steady 5V for Arduino, AVR, or PIC chips. * **Local On-card Regulation:** Dropping a higher system voltage (like 12V or 24V) down to 5V at the point of use to eliminate noise. * **Power Supplies:** Used in DIY laboratory power supplies or battery-powered devices. ---
    ✨ Follow-up Questions
    • ⤷ What is the difference between the LM78M05 and the standard LM7805?
    • ⤷ How much heat sinking does the LM78M05CT require at 12V input?
    • ⤷ Can this regulator be used to charge a Li-ion battery directly?