TPV4809DA
AI

The **TPV4809DA** is a high-efficiency, isolated DC-DC converter module, typically utilized in industrial and telecommunications applications where space-saving and stable power conversion are required.
---
### 1. Key Technical Specifications
The "TPV" series usually denotes a SIP (Single In-line Package) or DIP (Dual In-line Package) format. The nomenclature "4809" typically implies a 48V input and a 9V output.
| Feature | Specification (Typical) |
| :--- | :--- |
| **Input Voltage Range** | 36V - 72V DC (48V Nominal) |
| **Output Voltage** | 9V DC |
| **Isolation Voltage** | 1000V DC to 3000V DC |
| **Power Rating** | 1W to 2W (Series dependent) |
| **Package Style** | SIP-7 / DIP-8 / SMD |
| **Efficiency** | 75% - 85% |
---
### 2. Internal Electronic Components
The device is a self-contained system consisting of several critical sub-components:
#### A. Power Controller (PWM IC)
The brain of the module. It regulates the switching frequency to ensure the output remains at a steady 9V regardless of fluctuations in the 48V input.
#### B. Isolation Transformer
Because this is an isolated converter, it uses a high-frequency miniature transformer. This provides a physical barrier between the input and output circuits, protecting sensitive downstream components from high-voltage spikes on the 48V rail.
#### C. Rectification & Filtering
* **Schottky Diodes:** Used for high-speed rectification of the AC signal coming off the transformer.
* **Capacitors:** Low-ESR ceramic or tantalum capacitors are used to smooth the ripple voltage, ensuring a clean DC output.
#### D. Protection Circuitry
Most modules in this class include:
* **Short Circuit Protection (SCP):** Prevents the device from burning out if the output leads are crossed.
* **Over-Voltage Protection (OVP):** Clamps the output to prevent damage to the load.
---
### 3. Pin Configuration (Standard SIP-7)
While you should always consult the specific datasheet for your manufacturer (e.g., Mornsun, RECOM, or CUI), the pinout generally follows this logic:
| Pin Number | Function | Description |
| :--- | :--- | :--- |
| 1 | +Vin | Positive Input (48V) |
| 2 | -Vin | Ground Input |
| 4 | -Vout | Ground Output (Isolated) |
| 6 | +Vout | Positive Output (9V) |
---
### 4. Typical Applications
* **Telecommunications:** Converting standard 48V rack power to 9V for logic boards.
* **Industrial Automation:** Providing isolated power to sensors to prevent ground loops.
* **Data Communication:** Powering RS-485 or CAN bus interfaces where isolation is mandatory for noise immunity.
- ⤷
What is the maximum current rating for the TPV4809DA?
- ⤷
Does the TPV4809DA require external filtering capacitors for low noise?
- ⤷
What are the alternatives to the TPV4809DA with higher isolation voltage?