PE4610 / Pasternack Enterprises, Inc. - Datasheet(PDF) Chat AI

PE4610 Datasheet with Chat AI

Hello, Please ask a question about PE4610 Datasheet

# Example questions: ➢ What is the first step in the assembly process?
➢ What cable type is this connector designed to fit, based on the notes?
➢ What crimp tool sizes are required for assembling this connector, according to the document?

Part No.	PE4610
Manufacturer	PASTERNACK
Size	220 Kbytes
Pages	3 pages
Description	75 Ohm BNC Male Right Angle Connector Crimp/ Solder Attachment For RG179, RG187

Datasheet Summary with AI

Here's a summary of the information contained in the text, focusing on the key points:

Document Type: This is a technical drawing or instruction sheet for assembling a connector (likely RF/coaxial).

Connector Model: PE4610

Key Instructions/Steps (Assembly Procedure):

1. Slide Ferrules: Place a ferrule onto the cable.
2. Flare Braid: Flare the cable's braid.
3. Add Spacers: Apply a metal spacer and PTFE (Teflon) spacer.
4. Contact Engagement: Ensure the contact touches the dielectric.
5. Crimp: Crimp the connector in place.
6. Slide Ferrules: Move the ferrule to press against the connector body.

Tools/Requirements:

️· .068" Hex Crimp Tool (for the central contact)
️· .178" Hex Crimp Tool (for the ferrule/cable clamp)

Compatibility: This connector is designed for MIL-C-17 (military standard) or equivalent cables.

Document Information:

️· Revision: (Indicated by "REV")
️· File Name/Identifier: FSCM NO. 53919, CAD FILE 052402
️· Copyright: © 2013 Pasternack Enterprises.

In essence, the document provides a step-by-step guide for correctly attaching a PE4610 connector to a coaxial cable using specific crimping tools.

Document Type: This is a technical drawing or instruction sheet for assembling a connector (likely RF/coaxial).

Connector Model: PE4610

Key Instructions/Steps (Assembly Procedure):

1. Slide Ferrules: Place a ferrule onto the cable.
2. Flare Braid: Flare the cable's braid.
3. Add Spacers: Apply a metal spacer and PTFE (Teflon) spacer.
4. Contact Engagement: Ensure the contact touches the dielectric.
5. Crimp: Crimp the connector in place.
6. Slide Ferrules: Move the ferrule to press against the connector body.

Tools/Requirements:

️· .068" Hex Crimp Tool (for the central contact)
️· .178" Hex Crimp Tool (for the ferrule/cable clamp)

Compatibility: This connector is designed for MIL-C-17 (military standard) or equivalent cables.

Document Information:

️· Revision: (Indicated by "REV")
️· File Name/Identifier: FSCM NO. 53919, CAD FILE 052402
️· Copyright: © 2013 Pasternack Enterprises.

In essence, the document provides a step-by-step guide for correctly attaching a PE4610 connector to a coaxial cable using specific crimping tools.