Features
■ Non-Sensitizing per ISO:10993
■ Easy to Handle/Apply
■ Conformable¹ & Cushioning
■ ETO and Radiation Sterilization Compatible
■ Opaque White
■ Printable²1 Composition: Tape is ~22 mils [0.6 mm] thick without release liner target thickness. Backing 20 mil (0.5 mm) White Polyolefin Closed-Cell Foam2 Adhesive Non-tackified Acrylic-based, developed for skin contact Liner 63 lbs. Bleached Poly-coated Kraft paper, silicone release on one side, 4.6 mils ± 0.4 mils (0.12 mm ± 0.01 mm), printable Please note - The following technical information should be considered representative or typical only and should not be used for specification purposes. Typical Properties: *3M test methods are available upon request. Adhesion to Stainless Steel*, 180 deg 15.2 ounces/inch width (430 g/25mm width) (4.2 N/25 mm) Liner Release*, average 25 grams/inch width (25 gm/25 mm width) Roll Description: Tape supplied on 3 inch (76 mm) diameter cores. Length, Maximum 400 yards (366 meters) + 2 % Width, Maximum 48 inches (122 cm) + 1/16 inch (1.5 mm) Splices: Splices on the tape are intended for continuous processing. Roll Width Maximum Number of Splices per Roll < 8 inches (20 cm) 2 per 150 yards (137 meters) Information on the splice frequency in roll widths greater than 8 inches (20 cm) is available upon request. 4 per 289 yds. (264 m) 6 per 400 yds. (366 m) Rollstock Shelf Life and Recommended Storage: Product as supplied in original packaging will maintain stated properties for a period of two (2) years from date stamped on shipping container when stored at temperatures of 50-80ºF (10-27ºC) and a relative humidity between 40-60 percent. Please see reverse side for important product, safety and warranty information. 1Conditions based on 3M internal studies may not be representative of actual end use/performance and we recommend our OEM customers run their own studies using their device design. 2 May require pre-treatment or primer to increase ink anchorage before printing.