DESCRIPTION
The LTM®4656 is a complete high efficiency boost µModule® (power module) regulator with the switching controller, power FETs, inductor, and all supporting components. Only a few input and output capacitors are needed. Operating over an input voltage range of 4.5V to 28V, the LTM4656 supports an output voltage range of 6V to 36V, set by a single external resistor. Its high efficiency design delivers up to 5A continuous output current. An in-line protection circuit sets the maximum input current, and will trip off the input power if exceeded and retry (see Typical Applications section).

FEATURES
■ Complete Boost Switch Mode Power Supply
■ Wide Input Voltage Range: 4.5V to 28V
■ Output Voltage Range: 6V to 36V
■ 4A Continuous Output Current (12VIN, 24VOUT)
■ ±2% Maximum Total Output Voltage Regulation Over Load, Line and Temperature
■ Input Disconnect in Shutdown
■ Inrush Current Limit
■ External Frequency Synchronization
■ Programmable Frequency (350kHz to 780kHz)
■ Parallel Current Sharing
■ Up to 98% Efficiency
■ Selectable Burst Mode® Operation
■ In-Line Overcurrent Protection
■ Overtemperature Protection
■ LTM4656-1 Adjustable Compensation Version
■ 16mm × 16mm × 7.07mm BGA Package

APPLICATIONS
■ Telecom and Networking Equipment
■ Electronic Test Equipment