Features
■ z I / O Functions Eleven programmable I / O pins.
■ Two programmable 16-bit timers and counters built in. 34 different types of I / O functions to handle a wide range of input and output. ROM firmware image containing pre-programmed I / O drivers, greatly simplifying application programs. ( Stored in external ROM ) z Network functions Two CPUs for communication protocol processing built in. The communications and application CPUs execute in parallel. Equipped with a built-in LonTalk protocol which supports all seven levels of the OSI reference model with ISO. Highly reliable communication protocol is supplied as firmware. Built-in twisted-pair wire transceiver Equipped with communications modes and communication speeds which support various types of external transceivers. Supports twisted-pair wire, power line, radio ( RF ), infrared, coaxial cables and fiber optics. Communication port transceiver modes and logical addresses stored within the EEPROM. Can be amended via the network. Weight : 1.0g (Typ.)
■ QFP64-P-1414-0.80C
■ 000707EBA1 TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to p In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. roperty.
■ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk.
■ The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others.
■ The information contained herein is subject to change without notice. 2003-05-26 1/10