The NCV84120 is a fully protected single channel high side driver
that can be used to switch a wide variety of loads, such as bulbs,
solenoids, and other actuators. The device incorporates advanced
protection features such as active inrush current management,
over−temperature shutdown with automatic restart and an overvoltage
active clamp. A dedicated Current Sense pin provides precision analog
current monitoring of the output as well as fault indication of short to
VD, short circuit to ground and OFF state open load detection. An
active high Current Sense Enable pin allows all diagnostic and current
sense features to be enabled.

Features
• Short Circuit Protection with Inrush Current Management
• CMOS (3 V / 5 V) Compatible Control Input
• Very Low Standby Current
• Very Low Current Sense Leakage
• Proportional Load Current Sense
• Current Sense Enable
• Off State Open Load Detection
• Output Short to VD Detection
• Overload and Short to Ground Indication
• Thermal Shutdown with Automatic Restart
• Undervoltage Shutdown
• Integrated Clamp for Inductive Switching
• Loss of Ground and Loss of VD Protection
• ESD Protection
• Reverse Battery Protection
• AEC−Q100 Qualified
• This is a Pb−Free Device

Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial