General Description
The MAX5062/MAX5063/MAX5064 high-frequency, 125V half-bridge, n-channel MOSFET drivers drive high and low-side MOSFETs in high-voltage applications.

Features
♦ HIP2100/HIP2101 Pin Compatible (MAX5062A/MAX5063A)
♦ Up to 125V Input Operation
♦ 8V to 12.6V VDD Input Voltage Range
♦ 2A Peak Source and Sink Current Drive Capability
♦ 35ns Typical Propagation Delay
♦ Guaranteed 8ns Propagation Delay Matching Between Drivers
♦ Programmable Break-Before-Make Timing (MAX5064)
♦ Up to 1MHz Combined Switching Frequency while Driving 100nC Gate Charge (MAX5064)
♦ Available in CMOS (VDD / 2) or TTL Logic-Level Inputs with Hysteresis
♦ Up to 15V Logic Inputs Independent of Input Voltage
♦ Low 2.5pF Input Capacitance
♦ Instant Turn-Off of Drivers During Fault or PWM Start-Stop Synchronization (MAX5064)
♦ Low 200µA Supply Current
♦ Versions Available With Combination of Noninverting and Inverting Drivers (MAX5062B/D and MAX5063B/D)
♦ Available in 8-Pin SO, Thermally Enhanced SO, and 12-Pin Thin QFN Packages

Applications
    Telecom Half-Bridge Power Supplies
    Two-Switch Forward Converters
    Full-Bridge Converters
    Active-Clamp Forward Converters
    Power-Supply Modules
    Motor Control