Features
 Designed for automotive
applications
 STMicroelectronics® positioning receiver with
48 tracking channels and 2 fast acquisition
channels supporting GPS, Galileo, GLONASS,
BeiDou and QZSS systems
 Single die standalone receiver embedding RF
Front-End and low noise amplifier
 -162 dBm indoor sensitivity (tracking mode)
 Fast TTFF < 1 s in Hot start and 30 s in Cold
Start
 High performance ARM946 MCU (up to
196 MHz)
 External SQI Flash interface
 256 Kbyte embedded SRAM
 Real Time Clock (RTC) circuit
 32-bit Watch-dog timer
 2 UARTs
 1 I2C master/slave interface
 USB2.0 full speed (12 MHz) with integrated
physical layer transceiver
 2 Controller Area Network (CAN)
 2 channels ADC (10 bits)
 Operating condition:
– Main voltage regulator (VINL): 1.6 V to
4.3 V
– Backup voltage (VINB): 1.6 V to 4.3 V
– Digital voltage (VDDD): 1.1 V to 1.32 V
– RF core voltage (VCC): 1.2 V ± 10%
– IO Ring Voltage (VddIO): 1.8 V ± 5% or
3.3 V ± 10%
 Package:
– VFQFPN56 (8 x 8 x 1.0 mm) 0.5 mm pitch
 Ambient temperature range: -40/+85°C

Description
STA8090GA belongs to Teseo III family products.
STA8090GA is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/BeiDou/QZSS).
The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output.
STA8090GA is compliant with ST Automotive Grade qualification which includes in addition to AEC-Q100 requirements a set of production flow methodologies targeting zero defect per million.
STA8090GA, fulfilling high quality and service level requirements of the Automotive market, is the ideal solution for in-dash navigation, smart antenna, car to car, V2X and OEM telematics applications.
STA8090GAD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.