Features
1. Industry' s first top and
bottom 2- point contact
design prevents dust
intrusion.
The top and bottom two- point contacts with
springs prevent dust intrusion and enhance
contact reliability.

2. Greater Design Flexibility
Can be used with both top and bottom contacts
for enhanced product design.
Additionally, FH69' s back flip design greatly
increases the FPC/ FFC retention force in the
vertical direction.

3. Improved Workability
Even with the back- flip design, FH69 has a wide
mating port like existing front- flip types for easy
FPC/ FFC insertion. Additionally, since the product
is delivered with the actuator open, mating is
completed in the two simple steps of 1. FPC/ FFC
insertion, and 2. Closing the actuator.

4. FPC/ FFC Mis- mating
detection
Can detect mis- mating after FPC/ FFC insertion by
checking the location of the FPC/ FFC tabs.

5. Reduced switching time
Compatible with the FPC/ FFC and land pattern of
0. 5mm pitch standard products FH28/ FH28K/
FH52K/ FH52T/ FH75 for easy replacement when
top contact or vertical routing are required.
* Consult a Hirose representative about competitor
products.

6. 125℃ Heat Resistance
Ideal for applications requiring 125℃ heat
resistance
* When using FFC the heat resistance is up to 105℃. When the heat
resistance of the FPC/ FFC is less than 125 ℃ for FPC and 105℃
ｆor FFC, the heat resistance of the FPC/ FFC is applicable.

7. Passes Strict Automotive
Testing Requirements
FH69 passes rigorous tests for various
automotive applications.
( Ex. : Temperature Cycle)
Temperature : - 55 → + 15 to + 35 → + 125
→ + 1 5 t o 3 5℃
Time : 30 → 2 to 3 → 30 → 2 to 3min.
1000 cycles repeated under the above conditions

8. Halogen- Free
No chlorine or bromine exceeding the standard
value is used in the connector.
* As defined by IEC61249- 2- 21
Br- 900ppm maximum, Cl- 900ppm maximum,
Cl + Br combined- 1, 500ppm maximum