Features
• AEC-Q100 qualified
• Extreme low voltage operation for deep cold cranking applications (compliant
with LV124, revision 2013)
• General
– Quad channel smart high-side driver with current sense analog feedback
– Very low standby current
– Compatible with 3 V and 5 V CMOS outputs
• CurrentSense diagnostic functions
– Multiplexed analog feedback of: load current with high precision
proportional current mirror
– Overload and short to ground (power limitation) indication
– Thermal shutdown indication
– OFF-state open-load detection (with external pull-up)
– Output short to VCC detection
– Sense enable/disable
• Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Configurable latch-off on overtemperature or power limitation with
dedicated fault reset pin
– Loss of ground and loss of VCC
– Reverse battery with external components
– Electrostatic discharge protection

Applications
• Automotive resistive, inductive and capacitive loads
• Protected supply for ADAS systems: radars and sensors
• Automotive signal lamp: R10W and LEDs