DESCRIPTION
The TSOP93...P10TR series devices are the latest
generation miniaturized IR receiver modules for infrared
remote control systems. These series provide
improvements in sensitivity to remote control signals in dark
ambient as well as in sensitivity in the presence of optical
disturbances e.g. from CFLs.
The devices contain a PIN diode and a preamplifier
assembled on a lead frame. The epoxy package contains an
IR filter. The demodulated output signal can be directly
connected to a microprocessor for decoding.
The TSOP936..,P10TR series devices are designed to
receive long burst codes (10 or more carrier cycles per
burst). The third digit designates the AGC level (AGC6) and
the last two digits designate the band-pass frequency (see
table below). The higher the AGC, the better noise is
suppressed, but the lower the code compatibility. AGC6
provides maximized noise suppression. Generally, we
advise to select the highest AGC that satisfactorily receives
the desired remote code.
These components have not been qualified to automotive
specifications.

FEATURES
• Improved dark sensitivity
• Improved immunity against optical noise
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.0 V to 3.6 V
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912