FEATURES
• Dual voltage monitoring
—V2Mon operates independent of VCC
• Watchdog timer with selectable timeout intervals
• Low VCC detection and reset assertion
—Four standard reset threshold voltages
—User programmable VTRIP threshold
—Reset signal valid to VCC=1V
• Low power CMOS
—20μA max standby current, watchdog on
—1μA standby current, watchdog OFF
• 64Kbits of EEPROM
—64 byte page size
• Built-in inadvertent write protection
—Power-up/power-down protection circuitry
—Protect 0, 1/4, 1/2, all or 64, 128, 256 or 512
bytes of EEPROM array with programmable
Block Lock™ protection
• 400kHz 2-wire interface
—Slave addressing supports up to 4 devices on the same bus