Intelligent power module signal isolation Industrial inverters Motor drive



The Toshiba TLP706F consists of a GaAℓAs light-emitting diode and an integrated high-gain, high-speed photodetector. The TLP706F is suitable for isolating input control signals to intelligent power modules. This unit is a 6-pin SDIP. The TLP706F is 50% smaller than the 8-PIN DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring safety standard certification.

Buffer logic type ( totem pole output )

Pb Free

Guaranteed performance over temperature : −40~100°C

Power supply voltage : 4.5~20 V

Input current: IFHL= 5 mA (max.)

Switching time ( tpLH / t

pHL) : 600 ns (max.)

Common-mode transient immunity : ±10 kV/μs  (min)

Isolation voltage : 5000 Vrms (min)

UL Recognized :UL1577, File No.E67349

Option (D4)

  TÜV Approved : DIN EN60747-5-2

                        No.R50033433

  Maximum Operating Insulation Voltage : 1140VPK

  Highest Permissible Over Voltage   : 8000VPK

  (Note) : When a EN60747-5-2 approved type is needed, Please designate “Option(D4)”