The LPCXpresso546xx board includes the following features:
 On-board, high-speed USB based, Link2 debug probe with CMSIS-DAP and SEGGER J-Link protocol options:
 Link2 probe can be used with on-board LPC546xx or external target.
 UART and SPI port bridging from LPC546xx target to USB via the on-board debug probe.
 Support for external debug probe.
 3 x user LEDs
 Target Reset, ISP (3) and user buttons
 Expansion options based on popular standards:
 Arduino UNO compatible expansion site with additional LPCXpresso V3 standard connections
 PMod™ compatible expansion port
 On-board 3.3V regulator with external power supply options.
 Built-in power consumption measurement for target LPC546xx MCU.
 128Mb Micron MT25QL128 Quad-SPI flash.
 8MB Micron MT48LC8M16A2B4 SDRAM.
 Knowles SPH0641LM4H digital microphone.
 Full size SD/MMC card slot.
 NXP MMA8652FCR1 accelerometer.
 Stereo audio codec with line in/out.
 High and full speed USB ports with micro A/B connector for host or device functionality.
 10/100Mbps Ethernet (RJ45 connector).
 272x480 color LCD with capacitive touch screen.