1 Features
1• On-Chip USB Interface:
– With Full-Speed Transceivers
– Fully Compliant With USB 2.0 Specification
– Certified by USB-IF
– USB Adaptive Mode for Playback
– USB Asynchronous Mode for Record
– Self-Powered
• 16-Bit Delta-Sigma ADC and DAC
• Sampling Rates:
– DAC: 32, 44.1, 48 kHz
– ADC: 8, 11.025, 16, 22.05, 32, 44.1, 48 kHz
• On-Chip Clock Generator With Single 12-MHz Clock Source
• S/PDIF Input/Output
• Single Power Supply:
– 3.3 V Typical
• Stereo ADC:
– Analog Performance at VCCC = VCCP1 = VCCP2
= VCCX = VDD = 3.3 V:
– THD+N = 0.01%
– SNR = 89 dB
– Dynamic Range = 89 dB
– Decimation Digital Filter:
– Passband Ripple = ±0.05 dB
– Stop-Band Attenuation = –65 dB
– Single-Ended Voltage Input
– Antialiasing Filter Included
– Digital HPF Included
• Stereo DAC:
– Analog Performance at VCCC = VCCP1 = VCCP2
= VCCX = VDD = 3.3 V:
– THD+N = 0.005%
– SNR = 96 dB
– Dynamic Range = 93 dB
– Oversampling Digital Filter:
– Passband Ripple = ±0.1 dB
– Stop-Band Attenuation = –43 dB
– Single-Ended Voltage Output
– Analog LPF Included
• Multifunctions:
– Human Interface Device (HID) Function:
– Volume and Mute Controls
– Suspend Flag Function
• 28-Pin SSOP Package

2 Applications
• USB Audio Speaker
• USB Headset
• USB Monitor
• USB Audio Interface Box

3 Description
The PCM2903C is TI's single-chip, USB, stereo audio codec with a USB-compliant full-speed protocol
controller and S/PDIF. The USB protocol controller
requires no software code. The PCM2903C employs
SpAct™ architecture, TI's unique system that recovers the audio clock from USB packet data. On-
chip analog PLLs with SpAct enable playback and
record with low clock jitter, as well as independent
playback and record sampling rates.