• Two differential full-bridge sensor element
measurements
• One internal chip temperature measurement
• Two external Diode temperature measurements
• Digital compensation for offset, gain, and higher
order nonlinearity as well as temperature
coefficients of the differential sensor element
input signals
• Optional channel 1 – channel 2 difference output
• Operating temperature range: -40°C to 150°C
• Accuracy as high as ±0.50% full scale at -40°C to
150°C (see the electrical characteristics table for
conditions)
• NVM memory for configuration, calibration data,
and configurable measurement and conditioning
functionality
• SENT output compliant to SAE J2716 JAN2010
(SENT Rev. 3) and APR2016 (SENT Rev. 4)
standards
• Supports output of one or more sensor signals
and product identification via a single SENT
interface connection
• Configurable for nearly all resistive bridge
sensors
• One-pass, end-of-line calibration algorithm
minimizes production costs
• No external trimming or components required
• Qualified according to AEC-Q100 Grade 0
• Supply voltage: 4.75V to 5.25V
• Over-voltage and reverse polarity protection up to ±18V
• Bridge sensor input span: 1mV/V to 800mV/V
• Bridge sensor signal ADC resolution: 14 to 18 bit
• Output resolution: 12-bit via SENT interface
• Enhanced diagnostic features for sensor module
• Package: 24-QFN (4  4 mm; wettable flanks),
16-TSSOP (4.4  5 mm, exposed pad)