The newly developed W24 epoxide resin adhesive can be used in the
temperature range from –75 °C to +200 °C. The moulded parts are factorycoated
with W24 adhesive. In combination with the material G, i.e. as
GW24, the adhesive has approval to VG 95343, Part 18 and Part 19.
The V9500 two-component adhesive with approval to VG 95343 Part 15 can be
supplied in 50g cartridges for the practical P9500 dispensing guns (see page
203).
Lining with hot melt and epoxy adhesive for our range of materials on request.
The LFH material H is lined with W21 (LFH) hot melt adhesive.