Features:
Desk top electronic instrument enclosure, ideally suited for mounting printed circuit
boards.
Designed to meet IP54.
Two sets of vertical 1.5 mm (0.062”) P.C. board guides are molded into case halves front
and rear.
Integral horizontal P.C. card mounts on Eurocard centers.
P.C. card standoffs molded into top & bottom half of enclosure - require #6 x 1/4” (6.4mm)
screws - part number 1598ATS100
Standard version
Stocked in matte textured black and grey.
Molded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-
0).
Enclosure halves are secured with M3 x 0.5” x 10 mm (0.39”) Phillips machine screws
threaded into tapped integral brass bushings. Perfect for applications with repetitive
assembly and disassembly are required.
Front and rear panels are 1.6 mm (0.064”) brushed aluminum with protective paper on
one side.
Economy Version
Molded from general purpose ABS plastic (not flame retardant).
Enclosure halves are secured with self tapping screws threaded into plastic standoffs.
Not recommended for repeated assembly and disassembly.
Available with either brushed aluminum or black plastic end panels.
Other 1598 Series
If EMI/ RFI shielding is required, try series 1598R.