GENERAL DESCRIPTION
The AD9628 is a monolithic, dual-channel, 1.8 V supply, 12-bit, 125 MSPS/105 MSPS analog-to-digital converter (ADC). It features a high performance sample-and-hold circuit and onchip voltage reference.
The product uses multistage differential pipeline architecture with output error correction logic to provide 12-bit accuracy at 125 MSPS data rates and to guarantee no missing codes over the full operating temperature range.

FEATURES
   1.8 V analog supply operation
   1.8 V CMOS or LVDS outputs
   SNR = 71.2 dBFS @ 70 MHz
   SFDR = 93 dBc @ 70 MHz
   Low power: 101 mW/channel @ 125 MSPS
   Differential analog input with 650 MHz bandwidth
   IF sampling frequencies to 200 MHz
   On-chip voltage reference and sample-and-hold circuit
   2 V p-p differential analog input
   DNL = ±0.25 LSB
   Serial port control options
      Offset binary, Gray code, or twos complement data format
      Optional clock duty cycle stabilizer
      Integer 1-to-8 input clock divider
      Data output multiplex option
      Built-in selectable digital test pattern generation
      Energy-saving power-down modes
      Data clock out with programmable clock and data
         alignment

APPLICATIONS
   Communications
   Diversity radio systems
   Multimode digital receivers
      GSM, EDGE, W-CDMA, LTE,
         CDMA2000, WiMAX, TD-SCDMA
   I/Q demodulation systems
   Smart antenna systems
   Broadband data applications
   Battery-powered instruments
   Hand-held scope meters
   Portable medical imaging
   Ultrasound
   Radar/LIDAR