INTRODUCTION
The ADM1022 Evaluation Board allows the ADM1022 microprocessor system hardware monitor IC to be easily evaluated using a personal computer. Using both the evaluation board and its accompanying software, the ADM1022 can be interfaced to any personal computer running WindowsTM 95 or WindowsTM 98, via the computer’s parallel printer port, or via the computer’s SMBus using the DIMM interface card provided.
The evaluation board allows all the input and output functions of the ADM1022 to be exercised without the need for external components. The software allows control and monitoring of the ADM1022’s internal registers.

FEATURES
   External Temperature Measurement with Remote Diode
   (Two Channels)
   On-Chip Temperature Sensor
   Interrupt and Overtemperature Outputs
   Fault Tolerant Fan Control
   Brownout Detection
   LDCM Support
   I2C Compatible System Management Bus (SMBus)
   Standby Mode to Minimize Power Consumption
   Limit Comparison of all Monitored Values
  
APPLICATIONS
   Network Servers and Personal Computers
   Microprocessor-Based Office Equipment
   Test Equipment and Measuring Instruments