GENERAL DESCRIPTION
The ADSP-BF52x processors are members of the Blackfin family of products, incorporating the Analog Devices/Intel Micro Signal Architecture (MSA). Blackfin® processors combine a dual-MAC state-of-the-art signal processing engine, the advantages of a clean, orthogonal RISC-like microprocessor instruction set, and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture.

FEATURES
   Up to 600 MHz high performance Blackfin processor
      Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs,
         40-bit shifter
      RISC-like register and instruction model for ease of
         programming and compiler-friendly support
      Advanced debug, trace, and performance monitoring
   Accepts a wide range of supply voltages for internal and I/O
      operations. See Specifications on Page 28
   Programmable on-chip voltage regulator (ADSP-BF523/
      ADSP-BF525/ADSP-BF527 processors only)
   Qualified for Automotive Applications. See Automotive
      Products on Page 87
   289-ball and 208-ball CSP_BGA packages

MEMORY
   132K bytes of on-chip memory (See Table 1 on Page 3 for L1
      and L3 memory size details)
   External memory controller with glueless support for SDRAM
      and asynchronous 8-bit and 16-bit memories
   Flexible booting options from external flash, SPI, and TWI
      memory or from host devices including SPI, TWI, and UART
   Code security with Lockbox Secure Technology
      one-time-programmable (OTP) memory
   Memory management unit providing memory protection

PERIPHERALS
   USB 2.0 high speed on-the-go (OTG) with integrated PHY
   IEEE 802.3-compliant 10/100 Ethernet MAC
   Parallel peripheral interface (PPI), supporting ITU-R 656
      video data formats
   Host DMA port (HOSTDP)
   2 dual-channel, full-duplex synchronous serial ports
      (SPORTs), supporting eight stereo I2S channels
   12 peripheral DMAs, 2 mastered by the Ethernet MAC
   2 memory-to-memory DMAs with external request lines
   Event handler with 54 interrupt inputs
   Serial peripheral interface (SPI) compatible port
   2 UARTs with IrDA support
   2-wire interface (TWI) controller
   Eight 32-bit timers/counters with PWM support
   32-bit up/down counter with rotary support
   Real-time clock (RTC) and watchdog timer
   32-bit core timer
   48 general-purpose I/Os (GPIOs), with programmable
      hysteresis
   NAND flash controller (NFC)
   Debug/JTAG interface
   On-chip PLL capable of frequency multiplication