The ATS632LSC gear-tooth sensor is an optimized Hall-effect IC/magnet combination that provides tooth/valley recognition and extremely accurate tooth edge detection when used with large-pitch targets. The sensor subassembly consists of a high-temperature plastic shell that holds together a compound samarium-cobalt magnet, a single-element self-calibrating Hall-effect IC that has been optimized to the magnetic circuit, and a voltage regulator. This small package, with its non-oriented operation, can be easily assembled and used in conjunction with a number of gear configurations.

FEATURES AND BENEFITS
■ Non-Oriented Installation
■ Fully Optimized Gear-Tooth Sensors
■ Single-Chip Sensing IC for High Reliability
■ Zero-Speed Digital Output Representing Target Profile
■ Extremely Low Timing Accuracy Drift with Temperature
■ Large Operating Air Gaps
■ Optimized Magnetic Circuit
■ Self-Calibrating Circuitry
   with Integrated Offset Cancellation
   6-bit A/D Converters to Capture Peaks
   Thresholds Proportional to Peak-to-Peak Signals

Supply Voltage, VCC ......................... 24 V
Reverse Supply Voltage,
VRCC (1 minute max.)................ -24 V
Output OFF Voltage, VOUT................ 24 V
Output Current, IOUT .. Internally Limited
Reverse Output Current, IOUT ........ 50 mA
Package Power Dissipation, PD .................................... See Graph
Operating Temperature Range, TA ........................... -40°C to +150°C
Storage Temperature, TS ............ +170°C