The HIP0080/0081 Quad Power Drivers contain four individually protected NDMOS power output transistor switches to drive inductive and resistive loads such as: relays, solenoids, injectors, AC and DC motors, heaters and incandescent lamp displays. The 4 Power Drivers are low-side switches driven by CMOS logic input control stages. Each Output Power Driver is protected against over-current, over-temperature and over-voltage. An internal drain-to-gate zener diode provides the clamping protection for over-voltage.

Features
• Low Side Power MOSFET Output Drivers
• Output Driver Protection
    - Over-Current Shutdown
    - Over-Temperature Shutdown with Hysteresis
    - Over-Voltage Internal Clamp
• HIP0081 Output Current Switching Capability:
    - Each Output, IOUT . . . . . . . . . . . . . . . . . . . . . . 2.2A DC
    - All Outputs ON, Equal IOUT . . . . . . . . . . . . . . . . 6A DC
    - All Outputs ON, Equal IOUT . . . . . . . . . . 8A PK, 500ms
• HIP0080 Output Current Switching Capability:
    - Each Output, IOUT . . . . . . . . . . . . . . . . . . . . . . 1.3A DC
    - All Outputs ON, Unequal IOUT . . . . . . . . . . . . . . 3A DC
    - All Outputs ON, Unequal IOUT . . . . . . . . 4A PK, 500ms
• HIP0080 - Low Idle Current Shutdown Mode
• Regulated Interface for 5V CMOS Logic Inputs
• Open Drain High Z DATAOUT
• Fault Mode Output for Shorts, Opens and Over-Temperature
• 16-Bit Serial Diagnostic Register
• SPI Bus Compatible Data Readout
• HIP0081 - Low θJC Power Package . . . . . . . . . . . . 3°C/W
• -40°C to 125°C Operating Temperature Range

Applications
• Drivers For:
    - Solenoids - Injectors
    - Relays - Steppers
    - Power Output - Motors
    - Lamps - Displays
• System Use:
    - Automotive
    - Appliances
    - Industrial
    - Robotics