General Description
The MAX260/MAX261/MAX262 CMOS dual second order universal switched-capacitor active filters allow microprocessor control of precise filter functions. No external components are required for a variety of band pass, lowpass, highpass, notch, and allpass configurations. Each device contains two second-order filter sections that place center frequency, Q, and filter operating mode under programmed control.
An input clock, along with a 6-bit f0 program input, determine the filters center or corner frequency without affecting other filter parameters. The filter Q is also programmed independently. Separate clock inputs for each filter section operate with either a crystal, RC network, or external clock generator.
The MAX260 has offset and DC specifications superior to the MAX261 and MAX262 and a center frequency (f0) range of 7.5kHz. The MAX261 handles center frequencies to 57kHz, while the MAX262 extends the cen ter frequency range to 140kHz by employing lower clock-to-f0 ratios. All devices are available in 24-pin DIP and small outline packages in commercial, extended, and military temperature ranges.

Features
♦ Filter Design Software Available
♦ Microprocessor Interface
♦ 64-Step Center Frequency Control
♦ 128-Step Q Control
♦ Independent Q and f0 Programming
♦ Guaranteed Clock to f0 Ratio-1% (A grade)
♦ 75kHz f0 Range (MAX262)
♦ Single +5V and ±5V Operation

Applications
   µP-Tuned Filters
   Anti-Aliasing Filters
   Digital Signal Processing
   Adaptive Filters
   Signal Analysis
   Phase-Locked Loops