0031JVK-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Low Loss Cable Using LMR-400-UF Coax., Radio frequency assembly reverse polarity SMA male to N male low loss cable using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male low loss cable using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and type N cable connection on the other. Our low loss reverse polarity SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W00310 can also be known as a low loss reverse polarity SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to N type plug cable assembly PE3W00310 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00310 can also be used in the other direction and will be type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male low loss cable using LMR-400-UF coax.

215

PE3W00310LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity SMA Male Cable Using LMR-400-UF Coax, LF Solder. PE3W00310LF is a N male to reverse polarity SMA male cable using LMR-400-UF coax. This Pasternack N male to reverse polarity SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00310LF N male to SMA reverse polarity male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

0

PE3W00313

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SHV Plug to Banana Plug Cable Using PE-P195 Coax. PE3W00313 is a SHV plug to Banana plug cable using PE-P195 coax. This Pasternack SHV plug to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a 0 Ohm Banana for connector 2. Our plug SHV to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00313 SHV plug to Banana plug cable assembly is constructed with PE-P195 coax.

0

PE3W00315

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Female to SMP Female Right Angle Cable Using P. PE3W00315 is a SMA female to SMP female right angle cable using PE-047SR coax. This Pasternack SMA female to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to female SMP right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00315 SMA female to SMP female right angle cable assembly is constructed with PE-047SR coax.

0

PE3C0031LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to TNC Male Low Loss Cable Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to TNC male low loss cable using LMR-400 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male low loss cable using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3C0031LF, can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C0031LF is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0031LF can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable using LMR-400 coax, LF solder.

0

PE3C0031/HS

Pasternack Enterprises

0

PE3W00318LF/WH

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59-WHITE, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm TNC Male to 75 Ohm TNC Male Cable Using 75 Ohm RG59-WHITE White Coax. PE3W00318LF/WH is a TNC male to TNC male cable using RG59 coax. This Pasternack TNC male to TNC male cable assembly uses a 75 Ohm TNC for connector 1 and a 75 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W00318LF/WH TNC male to TNC male cable assembly is constructed with RG59 coax.

0

PE3W00031/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. QD SMA Male to BNC Female Cable Using RG223 Coax w. PE3W00031/HS is a SMA male to BNC female cable using RG223 coax. This Pasternack SMA male to BNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00031/HS SMA male to BNC female cable assembly is constructed with RG223 coax.

0

PE3W00314

Pasternack Enterprises

Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. LC Male Right Angle to HN Male Cable Using RG393 C. PE3W00314 is a LC male right angle to HN male cable using RG393 coax. This Pasternack LC male right angle to HN male cable assembly uses a 50 Ohm LC for connector 1 and a 50 Ohm HN for connector 2. LC right angle to HN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male LC right angle to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00314 LC male right angle to HN male cable assembly is constructed with RG393 coax.

0

PE3C0031

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50. N Male to TNC Male Cable Using LMR-400 Coax. PE3C0031 is a type N male to TNC male cable using LMR-400 coax. This Pasternack N type male to TNC male cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm TNC for connector 2. Our male type N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0031 N type male to TNC male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

0

PE3W00316

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to SMB Plug Cable Using RG58 Coax. PE3W00316 is a 7/16 DIN male to SMB plug cable using RG58 coax. This Pasternack 7/16 DIN male to SMB plug cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm SMB for connector 2. Our male 7/16 DIN to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00316 7/16 DIN male to SMB plug cable assembly is constructed with RG58 coax.

0

PE3W00311

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to Banana Plug Cable Using RG141. PE3W00311 is a SHV jack bulkhead to Banana plug cable using RG141 coax. This Pasternack SHV jack bulkhead to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a 0 Ohm Banana for connector 2. Our jack SHV bulkhead to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00311 SHV jack bulkhead to Banana plug cable assembly is constructed with RG141 coax.

0

PE3W10031

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Double Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. SHV Plug to Double Banana Plug Cable Using PE-C195 Coax. PE3W10031 is a SHV plug to Double Banana plug cable using PE-C195 coax. This Pasternack SHV plug to Double Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm Double Banana for connector 2. Our plug SHV to plug Double Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10031 SHV plug to Double Banana plug cable assembly is constructed with PE-C195 coax.

0

PE3C0031/WP

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to TNC Male (Plug) Low Loss Cable Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to TNC male (plug) low loss cable using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0031/WP can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0031/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3C0031/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0031/WP can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

0

PE3W00317LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W00317LF/HS is a N male to TNC male cable using RG58 coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00317LF/HS N male to TNC male cable assembly is constructed with RG58 coax.

0

TE Connectivity

0413-003-1605

TE Connectivity

SEALING PLUG, SIZE 16, BLU Connector Seal & Plug Type: Sealing Plug Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Primary Product Color: Blue Primary Product Material: PBT GF30 Sealing Plug Max Temp: -55 – 125 °C | Deutsch Sealing Plug | Part Number: 0413-003-1605 | Internal Number: 0413-003-1605 | Blue | PBT GF30 | TE Connectivity
RoHS : Compliant

1 : $0.31

333,664

62003-1

TE Connectivity

110 FASTON REC 22-16 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 62003-1 | Internal Number: 62003-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.16
100 : $0.22
10 : $0.27
1 : $0.34

32,977

T2210002010-031

TE Connectivity

DIA1.0 FEMALE STAMPING CONTACT,SN PLATED Connector System: Wire-to-Wire Circular Connector Type: Circular Connector Receptacle Sealable: Yes Contact Current Rating (Max): 5 A Circuit Application: Signal Wire-to-Wire Circular Connector Receptacle 5 A | Standard Circular Connector | Part Number: T2210002010-031 | Internal Number: T2210002010-031 | TE Connectivity
RoHS : Compliant

5,000 : $0.27
2,500 : $0.27
1,000 : $0.28
500 : $0.29
250 : $0.29
100 : $0.3
50 : $0.31
25 : $0.31
10 : $0.32
1 : $0.33

7,030

900318-1

TE Connectivity

PL 312 FLAG REC 20-18AWG 0.32X24.9 PTPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 18 AWG Wire Size: .51 – .82 mm² Mating Tab Width: 7.92 mm Receptacle Uninsulated 20 – 18 AWG .51 – .82 mm² | Quick Disconnect | Part Number: 900318-1 | Internal Number: 900318-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.15
100 : $0.2
10 : $0.25
1 : $0.32

5,950

900319-1

TE Connectivity

PL 312 FLAG REC 20-18AWG 0.32X24.9 PTPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 18 AWG Wire Size: .51 – .82 mm² Mating Tab Width: 7.92 mm Receptacle Uninsulated 20 – 18 AWG .51 – .82 mm² | Quick Disconnect | Part Number: 900319-1 | Internal Number: 900319-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.16
100 : $0.22
10 : $0.27
1 : $0.35

5,549

1-282003-1

TE Connectivity

MONO-SHAPE TAB CONN 3P. ASSY Standard Rectangular Connector | Part Number: 1-282003-1 | Internal Number: 1-282003-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.44
1,000 : $0.52
500 : $0.58
250 : $0.61
100 : $0.69
50 : $0.76
25 : $0.82
10 : $0.92
1 : $1.01

2,682

55PC6003-18-2/6-9CS2502

TE Connectivity

55PC6003-18-2/6-9CS2502 Cable Type: Spec 55PC Operating Voltage: 600 VAC Wire & Cable Insulation Material: Radiation Crosslinked Modified ETFE Conductor Material: Nickel-Coated High Strength Copper Alloy Wire Size: 18 AWG Spec 55PC 600 VAC Radiation Crosslinked Modified ETFE Nickel-Coated High Strength Copper Alloy | Twisted Pair Cabling | Part Number: 55PC6003-18-2/6-9CS2502 | Internal Number: 461081-000 | Alias Number: 3-1193458-0 | 18 AWG
RoHS : Compliant

1 : $4.2

1,690

20031092-00

TE Connectivity

PT Motor platform temperature sensor RTD Sensor Type: Platinum Stator Winding RTD Element Type: Thin Film Element Material: Platinum Operating Temperature (Max): 392 °F Operating Temperature (Max): 200 °C Platinum Stator Winding RTD Thin Film | Rtd Probe | Part Number: 20031092-00 | Internal Number: 20031092-00 | TE Connectivity
RoHS : Compliant

1 : $13.19

1,551

5555003-1

TE Connectivity

MJ,R/A,6P,PNL,RH LTCH,GRY Port Configuration: Single Port Port Matrix Configuration: 1 x 1 Connector Profile: Standard Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Connector Contact Density: Standard Single Port 1 x 1 Standard RJ Type Jacks & Plugs | Rj25 Connector | Part Number: 5555003-1 | Internal Number: 5555003-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.56
500 : $1.61
250 : $1.66
100 : $1.71
50 : $1.76
1 : $1.94

1,379

20031343-01

TE Connectivity

NTC Cylinder Motor temperature sensor NTC Probe Type: Temperature Electrical Connection: Cable Resistance (at 25°C): 10 kΩ β-Value(25/85): 3550 K Sensor Package: Plastic Housing Temperature Cable | Ntc Probe | Part Number: 20031343-01 | Internal Number: 20031343-01 | TE Connectivity
RoHS : Compliant

1 : $6.36

426

V23136-L0031-D642

TE Connectivity

V23136L0031D642-EV-CBOX Relay & Contactor Type: Automotive Power Relay Current Type: DC Coil Magnetic System: Bistable, 1 Coil, Latching Contact Arrangement: 1 Form A (NO) Contact Current Rating: 70 A Automotive Power Relay DC Bistable, 1 Coil, Latching 1 Form A (NO) | Electromechanical Relay | Part Number: V23136-L0031-D642 | Internal Number: 4-1904060-6 | TE Connectivity
RoHS : Compliant

500 : $5.66
250 : $7.07
100 : $8.48
50 : $11.31
1 : $16.97

224

500031-1

TE Connectivity

SPIRAP 1/2 PE, OUTDR,BLK,50FT Wire & Cable Accessory Type: Cable Tie Tool Cable Tie Mount Type: Spiral Primary Product Material: Outdoor Polyethylene Primary Product Color: Black Packaged Length: 15.24 m Cable Tie Tool Spiral Outdoor Polyethylene Black | Cable Tie Mounts & Accessories | Part Number: 500031-1 | Internal Number: 500031-1 | TE Connectivity
RoHS : Compliant

500 : $4.51
250 : $4.66
100 : $4.82
50 : $4.97
25 : $5.13
10 : $5.28
1 : $5.44

119

T2030031005-000

TE Connectivity

HEM-0.5,L=28 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 20 AWG Contact Retention Within Housing: With Silver (Ag) Pin 20 AWG | Connector Contact | Part Number: T2030031005-000 | Internal Number: T2030031005-000 | TE Connectivity
RoHS : Compliant

50 : $9.97
25 : $10.55
10 : $11.14
1 : $11.73

86

T2030031040-000

TE Connectivity

HEM-4.0,L=28 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 12 AWG Contact Retention Within Housing: With Silver (Ag) Pin 12 AWG | Connector Contact | Part Number: T2030031040-000 | Internal Number: T2030031040-000 | TE Connectivity
RoHS : Compliant

50 : $9.97
25 : $10.55
10 : $11.14
1 : $11.73

32

T2030031025-000

TE Connectivity

HEM-2.5,L=28 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 14 AWG Contact Retention Within Housing: With Silver (Ag) Pin 14 AWG | Connector Contact | Part Number: T2030031025-000 | Internal Number: T2030031025-000 | TE Connectivity
RoHS : Compliant

50 : $10.47
25 : $11.08
10 : $11.7
1 : $12.31

31

0031JVK-R Reseller

Enlace URL