0031LFC-R Price, Reseller, Stock

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: RG214, Interface Type 2: RG9, Interface Type 3: RG225, Interface Type 4: RG393. N Female Bulkhead Mount Connector Crimp/Solder Attachment for RG214, RG9, RG225, and RG393, Hole Size 0.535 X 0.640 inch. PE910031 Type N female bulkhead coaxial connector has an interface type of Type N female which is compatible with RG214, RG9, RG225 and RG393 cables and has an impedance of 50 Ohms. Pasternack's Type N female bulkhead connector uses crimp/solder as an attachment method. Our female Type N coaxial connector provides a maximum frequency of 6 GHz. This Type N female RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online cable creator. The Pasternack Type N female bulkhead coaxial connector has a teflon dielectric type and a VSWR of 1.2:1. Pasternack's Type N coaxial connector has a brass body with copper-tin-zinc alloy plating. Our PE910031 Type N connector uses a gold over nickel over copper-plated bronze contact.The Pasternack RF connector block has a maximum inner conductor and outer conductor resistance of 1.5 mOhms and 1 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE910031 Type N bulkhead connector operates at a temperature range of -65 to 165 deg C. This female Type N coaxial RF connector has a maximum insertion loss of 0.122 dB. This Type N connector has a gold over nickel over copper inner contact plating. The Pasternack Type N female connector has a maximum operating voltage of 1,000 Vrms and a dielectric withstanding voltage of 2,500 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our Type N female connector has a length of 1.476 inches, a width of 0.827 inches, and a weight of 0.095 lbs. This Pasternack female Type N bulkhead connector will ship the same business day as purchased. Our bulkhead Type N female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $34.19
25 : $32.48
50 : $30.77
100 : $29.4

PE3C8003-150CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. NEX10 Male to NEX10 Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-150CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $107.99
25 : $102.59
50 : $97.19
100 : $92.87

PE20S0031

Pasternack Enterprises

Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Connector Series Out: N, Connector Gender Out: Female, Minimum Frequency: 700 MHz, Maximum Frequency: 6 GHz, Ports: 4, Impedance: 50 Ohms, Maximum Input Power: 300 Watts. 4 Way Broadband Combiner from 700 MHz to 6 GHz SMA Female Input and N-Type Female Output rated 300 Watts. Pasternack’s PE20S0031 is a passive 4-way broadband RF combiner that operates at a minimum frequency of 700 MHz and a maximum frequency of 6 GHz. Our high-power Coaxial Connectorized combiner has a maximum input-output VSWR of 1.35:1 along with a maximum power handling capacity of 300 Watts. This 4-way RF power combiner is stocked to be readily available for same business day shipment. Our Coaxial combiner has an SMA Female input and N Female output connectors. This PE20S0031 4-way RF power combiner from Pasternack is suitable for Communications Systems, Power Combining, PCS, GSM, LTE, Cellular, Amplifier Systems, Amplifier Power Combining, Wireless Infrastructures and Defense Applications applications. Our Reactive broadband RF combiner has a length of 5.2 inches, a width of 3.9 inches, and a weight of 1.76 lbs. Additional radio frequency combiner specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings. The high-power 4-way broadband RF combiner has a minimum isolation of 6.5 dB and a maximum insertion loss of 1.1 dB. Our Female Coaxial radio frequency combiner has a typical phase balance of 7 degrees and a typical amplitude balance of 0.4 dB. This PE20S0031 broadband radio frequency power combiner from Pasternack has an impedance of 50 Ohms. Our Coaxial Connectorized combiner can operate at temperatures ranging from -55° to 85° degrees C. This Pasternack 4-way RF combiner will ship the same business day as purchased. Our high-power Coaxial combiner is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF power combiner as per your requirements.

1 : $3,300.0
5 : $3,234.0
10 : $3,168.0
25 : $3,102.0

PE2CP003-10

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 500 MHz, Maximum Frequency: 2 GHz, Maximum Input Power: 50 Watt, Coupling Value: 10 dB. Directional 10 dB SMA Coupler From 500 MHz to 2 GHz Rated to 50 Watts. RF coupler part number PE2CP003-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 500 MHz and a maximum frequency of 2 GHz. Directional coupler part # PE2CP003-10 is constructed with a coupling value of 10 dB and a coupler directivity of 20 dB. This female SMA directional coupler is built with a maximum insertion loss of 0 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0 dB and a maximum VSWR of 1.25. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP003-10 directional 10 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $205.99
10 : $197.75
25 : $189.51

PE3C0031/WP-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to TNC Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to TNC male (plug) low loss cable 24 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0031/WP-24 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0031/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3C0031/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0031/WP-24 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $183.99
25 : $174.79
50 : $165.59
100 : $158.23

PE3C0031LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to TNC Male Low Loss Cable Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to TNC male low loss cable using LMR-400 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male low loss cable using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3C0031LF, can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C0031LF is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0031LF can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable using LMR-400 coax, LF solder.

PE3C0031/WP

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to TNC Male (Plug) Low Loss Cable Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to TNC male (plug) low loss cable using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0031/WP can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0031/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3C0031/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0031/WP can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3W00310

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Male Low Loss Cable Using LMR-400-UF Coax., Radio frequency assembly reverse polarity SMA male to N male low loss cable using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male low loss cable using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and type N cable connection on the other. Our low loss reverse polarity SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W00310 can also be known as a low loss reverse polarity SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to N type plug cable assembly PE3W00310 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00310 can also be used in the other direction and will be type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male low loss cable using LMR-400-UF coax.

PE3W00311

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 0 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to Banana Plug Cable Using RG141. PE3W00311 is a SHV jack bulkhead to Banana plug cable using RG141 coax. This Pasternack SHV jack bulkhead to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a 0 Ohm Banana for connector 2. Our jack SHV bulkhead to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00311 SHV jack bulkhead to Banana plug cable assembly is constructed with RG141 coax.

PE3W10031

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Double Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. SHV Plug to Double Banana Plug Cable Using PE-C195 Coax. PE3W10031 is a SHV plug to Double Banana plug cable using PE-C195 coax. This Pasternack SHV plug to Double Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm Double Banana for connector 2. Our plug SHV to plug Double Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10031 SHV plug to Double Banana plug cable assembly is constructed with PE-C195 coax.

PE3C0031-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to TNC Male Cable 12 Inch Length Using LMR-400 Coax., Radio frequency assembly N male to TNC male cable 12 inch length using LMR-400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male cable 12 inch length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3C0031-12, can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C0031-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0031-12 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 12 inch length using LMR-400 coax.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3W00310-120

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. Reverse Polarity SMA Male to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly reverse polarity SMA male to N male low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male low loss cable 120 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and N type cable connection on the other. Our low loss reverse polarity SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W00310-120 can also be known as a low loss reverse polarity SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W00310-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00310-120 can also be used in the other direction and will be type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male low loss cable 120 inch length using LMR-400-UF coax.

1 : $159.99
25 : $151.99
50 : $143.99
100 : $137.59

PE3W00031

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. QD SMA Male to BNC Female Cable Using RG223 Coax. PE3W00031 is a SMA male to BNC female cable using RG223 coax. This Pasternack SMA male to BNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00031 SMA male to BNC female cable assembly is constructed with RG223 coax.

PE3W00310-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Male to N Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax., Radio frequency assembly reverse polarity SMA male to N male low loss cable 12 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA male to N male low loss cable 12 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and type N cable connection on the other. Our low loss reverse polarity SMA to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W00310-12 can also be known as a low loss reverse polarity SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to type N plug cable assembly PE3W00310-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00310-12 can also be used in the other direction and will be type N male to reverse polarity SMA male cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to N male low loss cable 12 inch length using LMR-400-UF coax.

1 : $129.99
25 : $123.49
50 : $116.99
100 : $111.79

TE Connectivity

62003-1

TE Connectivity

110 FASTON REC 22-16 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 2.8 mm Receptacle Uninsulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 62003-1 | Internal Number: 62003-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.16
100 : $0.22
10 : $0.27
1 : $0.34

33,112

1863003-1

TE Connectivity

09P UMNL PLUG HSG Number of Positions: 9 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Standard Rectangular Connector | 9 Plug Housing Crimp | Part Number: 1863003-1 | Internal Number: 1863003-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.58
1,000 : $0.67
500 : $0.76
250 : $0.8
100 : $0.91
50 : $1.0
25 : $1.07
10 : $1.2
1 : $1.32

8,536

2106003-1

TE Connectivity

Connector, SMT-IDC, 1 POS, 18 AWG Connector System: Wire-to-Board Number of Positions: 1 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 1 4" .16 mm | Poke-In Connector | Part Number: 2106003-1 | Internal Number: 2106003-1 | 4" | TE Connectivity
RoHS : Compliant

5,000 : $0.49
2,500 : $0.5
1,000 : $0.52
500 : $0.53
250 : $0.54
100 : $0.55
50 : $0.56
25 : $0.58
10 : $0.59
1 : $0.6

6,425

900318-1

TE Connectivity

PL 312 FLAG REC 20-18AWG 0.32X24.9 PTPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 18 AWG Wire Size: .51 – .82 mm² Mating Tab Width: 7.92 mm Receptacle Uninsulated 20 – 18 AWG .51 – .82 mm² | Quick Disconnect | Part Number: 900318-1 | Internal Number: 900318-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.15
100 : $0.2
10 : $0.25
1 : $0.32

5,950

53003-1

TE Connectivity

TERMINAL,BUDG SPR SPD 26-22 6 Spade Terminal Type: Spring Spade Terminal Wire Size: 26 – 22 AWG Wire Size: .12 – .4 mm² Wire Size: 202 – 810 CMA Stud Size: M3.5 #6 Spring Spade Terminal 26 – 22 AWG .12 – .4 mm² 202 – 810 CMA | Part Number: 53003-1 | Internal Number: 53003-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.56
1,000 : $0.57
500 : $0.59
250 : $0.6
100 : $0.62
50 : $0.63
25 : $0.65
10 : $0.66
1 : $0.68

4,072

1-282003-1

TE Connectivity

MONO-SHAPE TAB CONN 3P. ASSY Standard Rectangular Connector | Part Number: 1-282003-1 | Internal Number: 1-282003-1 | TE Connectivity
RoHS : Compliant

2,500 : $0.44
1,000 : $0.52
500 : $0.58
250 : $0.61
100 : $0.69
50 : $0.76
25 : $0.82
10 : $0.92
1 : $1.01

2,692

55PC6003-18-2/6-9CS2502

TE Connectivity

55PC6003-18-2/6-9CS2502 Cable Type: Spec 55PC Operating Voltage: 600 VAC Wire & Cable Insulation Material: Radiation Crosslinked Modified ETFE Conductor Material: Nickel-Coated High Strength Copper Alloy Wire Size: 18 AWG Spec 55PC 600 VAC Radiation Crosslinked Modified ETFE Nickel-Coated High Strength Copper Alloy | Twisted Pair Cabling | Part Number: 55PC6003-18-2/6-9CS2502 | Internal Number: 461081-000 | Alias Number: 3-1193458-0 | 18 AWG
RoHS : Compliant

1 : $4.2

1,690

20031092-00

TE Connectivity

PT Motor platform temperature sensor RTD Sensor Type: Platinum Stator Winding RTD Element Type: Thin Film Element Material: Platinum Operating Temperature (Max): 392 °F Operating Temperature (Max): 200 °C Platinum Stator Winding RTD Thin Film | Rtd Probe | Part Number: 20031092-00 | Internal Number: 20031092-00 | TE Connectivity
RoHS : Compliant

1 : $13.19

1,553

20031343-00

TE Connectivity

NTC Rectanglar Motor temperature sensor NTC Probe Type: Temperature Electrical Connection: Cable Resistance (at 25°C): 10 kΩ β-Value(25/85): 3550 K Sensor Package: Plastic Housing Temperature Cable | Ntc Probe | Part Number: 20031343-00 | Internal Number: 20031343-00 | TE Connectivity
RoHS : Compliant

1 : $6.36

1,482

1-2273003-1

TE Connectivity

M8 x 1.0 straight socket Pigtail Cable Assembly Type: M8 Pigtail Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 Pigtail 4 1.5 m 4.9 ft | M8 Straight Pigtail & Female | Part Number: 1-2273003-1 | Internal Number: 1-2273003-1 | TE Connectivity
RoHS : Compliant

250 : $23.95
100 : $24.91
50 : $25.86
25 : $26.82
10 : $27.77
1 : $28.73

991

T2030031002-000

TE Connectivity

HEM-0.3(AWG26-22),L=28 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 22 AWG Contact Retention Within Housing: With Silver (Ag) Pin 22 AWG | Connector Contact | Part Number: T2030031002-000 | Internal Number: T2030031002-000 | TE Connectivity
RoHS : Compliant

1,000 : $8.71
500 : $8.97
250 : $9.23
100 : $9.5
50 : $9.76
25 : $10.03
10 : $10.29
1 : $10.55

759

CONSMA020.031-G

TE Connectivity

SMA Jack 50 Ohm .031 PCB Edge Mount RF Interface: SMA RF Connector Style: Jack Impedance: 50 Ω RF Connector Coupling Mechanism: Threaded Operating Frequency Range: 18 GHz SMA Jack 50 Ω Threaded | Coax Connector | Part Number: CONSMA020.031-G | Internal Number: L9000277-01 | TE Connectivity
RoHS : Compliant

1,000 : $7.24
500 : $7.44
250 : $7.67
100 : $7.93
50 : $8.16
1 : $8.96

483

170031-2

TE Connectivity

FF 250 REC 20-14AWG TPBR REREELING Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 14 AWG Wire Size: .51 – 2.08 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 20 – 14 AWG .51 – 2.08 mm² | Quick Disconnect | Part Number: 170031-2 | Internal Number: 170031-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.2
100 : $0.27
10 : $0.33
1 : $0.43

163

T2030031005-000

TE Connectivity

HEM-0.5,L=28 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 20 AWG Contact Retention Within Housing: With Silver (Ag) Pin 20 AWG | Connector Contact | Part Number: T2030031005-000 | Internal Number: T2030031005-000 | TE Connectivity
RoHS : Compliant

50 : $9.97
25 : $10.55
10 : $11.14
1 : $11.73

T2030031025-000

TE Connectivity

HEM-2.5,L=28 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 14 AWG Contact Retention Within Housing: With Silver (Ag) Pin 14 AWG | Connector Contact | Part Number: T2030031025-000 | Internal Number: T2030031025-000 | TE Connectivity
RoHS : Compliant

50 : $10.47
25 : $11.08
10 : $11.7
1 : $12.31

Vyrian

FKC500031

Diodes Incorporated

CMOS Output Clock Oscillator

16,389

BGA2003,115

NXP Semiconductors

Wide Band Low Power Amplifier, 900MHz Min, 1800MHz Max, 1 Func, BIPolar
RoHS : Compliant

13,203

MAX20031BATMA-V+T

Analog Devices (Maxim Integrated)

12,050

2600031-1

TE Connectivity

Combination Line Connector, Plug
RoHS : Compliant

10,863

MAX3966C-D-B50031

Analog Devices (Maxim Integrated)

10,838

MAX20031ATMD-V-T

Analog Devices (Maxim Integrated)

10,679

C01620K00310012

Amphenol Corporation

3 Contact(s), Male, Screw Terminal, Receptacle
RoHS : Compliant

10,643

MAX20031BATME-V-T

Analog Devices (Maxim Integrated)

10,239

83002003100

Belden Inc

Wire And Cable, 1 Conductor(s), 26AWG, 600V, Flexible Cord And Fixture Wire
RoHS : Compliant

8,892

2900317

Phoenix Contact

Power/Signal Relay, SPDT, Momentary, 0.015A (Coil), 12VDC (Coil), 183.6mW (Coil), 36VDC (Contact), DC Input, DIN-Rail Mount
RoHS : Compliant

7,923

37003150430

Littelfuse Inc

Electric Fuse, Fast Blow, 0.315A, 250VAC, 35A (IR), Through Hole, TR5
RoHS : Compliant

7,840

03400313Z

Littelfuse Inc

RoHS : Compliant

4,647

3100318

Phoenix Contact

Modular Terminal Block, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

4,202

HPA00314DGSR

Texas Instruments

Switching Regulator
RoHS : Compliant

3,161

90075-0031

Molex

Telecom and Datacom Connector, 6 Contact(s), Male, Straight, Crimp Terminal, Plug
RoHS : Compliant

250

Win Source Electronics

UCS1003-1-BP-TR

Microchip Technology Inc

IC USB PORT POWER CTRLR
RoHS : Compliant

155 : $2.1731
116 : $2.4239
90 : $2.5076
65 : $2.5911
42 : $2.6747
18 : $3.2598

117,000

9H03200031

TXC Corporation

CRYSTAL 32.768KHZ 12.5PF SMD
RoHS : Compliant

1,610 : $0.1864
1,290 : $0.194
995 : $0.2016
695 : $0.2167
450 : $0.2243
210 : $0.2394

45,000

43650-0312

Molex

MICRO FIT (3.0) SINGLE ROW / RIGHT ANGLE SMT / NAILS / REELS
RoHS : Compliant

280 : $1.0834
210 : $1.2084
160 : $1.25
120 : $1.2917
75 : $1.3334
35 : $1.625

39,305

SQM40031EL_GE3

Vishay Huntington

MOSFET P-CH 40V 120A D2PAK / P-Channel 40 V 120A (Tc) 375W (Tc) Surface Mount TO-263 (D²Pak)

152 : $1.9752
114 : $2.2031
88 : $2.279
64 : $2.355
42 : $2.431
17 : $2.9627

37,682

FL2500316Z

Diodes Incorporated

CRYSTAL 25.0000MHZ 20PF SMD
RoHS : Compliant

965 : $0.3114
720 : $0.3473
560 : $0.3593
405 : $0.3713
265 : $0.3832
110 : $0.4671

30,000

61300311121

Wurth Elektronik

CONN HEADER VERT 3POS 2.54MM
RoHS : Compliant

4,515 : $0.0665
3,370 : $0.0742
2,610 : $0.0767
1,895 : $0.0793
1,225 : $0.0819
505 : $0.0997

17,032

43650-0315

Molex

CONN HEADER 3POS 3MM VERT TIN
RoHS : Compliant

765 : $0.394
570 : $0.4394
440 : $0.4546
320 : $0.4697
210 : $0.4849
85 : $0.591

10,423

0436500315

Molex

CONN HEADER VERT 3POS 3MM
RoHS : Compliant

925 : $0.3637
695 : $0.4057
535 : $0.4197
390 : $0.4337
255 : $0.4476
105 : $0.5456

9,360

BVS-A-R003-1.0

Isabellenhuette

RES 0.003 OHM 1% 5W 3920
RoHS : Compliant

850 : $0.3538
635 : $0.3946
490 : $0.4083
360 : $0.4219
230 : $0.4355
95 : $0.5307

8,472

WPH4003-1E

onsemi

MOSFET N-CH 1700V 2.5A TO3PF / N-Channel 1700 V 2.5A (Tc) 3W (Ta), 55W (Tc) Through Hole TO-3PF
RoHS : Compliant

11 : $37.3707
8 : $41.6826
6 : $43.1201
5 : $44.5574
3 : $45.9947
2 : $56.056

2,000

LM5114BMF/S7003110

Texas Instruments

IC GATE DRVR LOW-SIDE SOT23-6
RoHS : Compliant

122 : $2.4756
91 : $2.7612
71 : $2.8564
51 : $2.9516
33 : $3.0468
14 : $3.7133

589

TLK10031CTR

Texas Instruments

IC TRANSCEIVER 1/1 144FCBGA
RoHS : Compliant

10 : $30.5278
8 : $34.0503
6 : $35.2244
5 : $36.3986
3 : $37.5727
2 : $45.7917

563

0031LFC-R Reseller

Enlace URL