012HF-R Price, Reseller, Stock

Key Specifications, Connector Series: N, Connector Gender: Male, Chain Option: Chain. N Male Open Circuit Connector Cap with 3.75 Inch Chain. Pasternack’s M39012/25-0012 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a N-type connector series and a male gender. Our N-type male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 3.75-inch long chain to prevent loss and misplacement. Our M39012/25-0012 dust cap has a length of 4.95 inches, a width of 0.78 inches, and a height of 0.78 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this N-type male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0012 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements.

1 : $35.19
25 : $33.43
50 : $31.67
100 : $30.26

845

PE3C0120-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Male Right Angle with Times Connectors Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3C0120-12, can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0120-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0120-12 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle with times connectors cable 12 inch length using LMR-195 coax.

1 : $77.99
25 : $74.09
50 : $70.19
100 : $67.07

604

PE3200-12

Pasternack Enterprises

Key Specifications, Connector Series 1: GR874, Connector Gender 1: Hermaphroditic, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: GR874, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. GR874 Sexless to GR874 Sexless Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly GR874 sexless to GR874 sexless cable 12 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. GR874 sexless to GR874 sexless cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom GR874 to GR874 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with GR874 cable connection on one end and GR874 cable connection on the other. Our GR874 to GR874 cable assemblies have a sexless gender on end 1 and sexless on end 2. This GR874 to GR874 cable is a sexless to sexless coax assembly, PE3200-12, can also be known as a GR874 sexless to GR874 sexless cable assembly and will be shipped same-day as it is purchased. GR874 sexless to GR874 sexless cable assembly PE3200-12 is built with RG142 which is a flexible coax type. The Pasternack flexible GR874 cable assembly is manufactured with GR874 to GR874 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this GR874 sexless to GR874 sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. GR874 sexless to GR874 sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality GR874 to GR874 cable assembly for quick shipment worldwide. Variations of GR874 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this GR874 sexless to GR874 sexless cable 12 inch length using RG142 coax.

1 : $129.99
25 : $123.49
50 : $116.99
100 : $111.79

250

PE3M0120-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 12 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3029 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3029 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0120-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3029 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3029 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0120-12 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/55-3029 SMA cable assembly is manufactured with M39012/55-3029 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3029 SMA male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0120-12 can also be used in the other direction and will be right angle M39012/56-3129 SMA male to M39012/55-3029 SMA male cable assembly if the opposite connectivity is required. M39012/55-3029 SMA plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3029 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3029 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 12 inch length using M17/28-RG58 coax.

1 : $387.99
25 : $368.59
50 : $349.19

PE3M0121-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 24 inches. MIL-DTL-17 SMA Male Right Angle to SMA Male Right Angle Cable 24 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to SMA male right angle cable 24 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to SMA male right angle cable 24 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0121-24, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0121-24 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/56-3129 SMA right angle plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to SMA male right angle cable 24 inch length using M17/28-RG58 coax.

1 : $299.99
25 : $284.99
50 : $269.99

PE3M0124-30

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 TNC Male to TNC Male Cable 30 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 TNC male to TNC male cable 30 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 TNC male to TNC male cable 30 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/26-0010 TNC to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/26-0010 TNC cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our M39012/26-0010 TNC to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/26-0010 TNC to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0124-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/26-0010 TNC plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/26-0010 TNC plug to M39012/26-0010 TNC plug cable assembly PE3M0124-30 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/26-0010 TNC cable assembly is manufactured with M39012/26-0010 TNC to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/26-0010 TNC male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/26-0010 TNC plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/26-0010 TNC to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/26-0010 TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 TNC male to TNC male cable 30 inch length using M17/28-RG58 coax.

1 : $385.99
25 : $366.69
50 : $347.39

PE3C10750-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 2.92mm Female 4 Hole Flange Cable 12 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10750-12 1.85mm male to 2.92mm female 4 hole flange mount RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm 4 hole flange mount cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10750-12 can also be known as a 1.85mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 4 hole flange mount 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C10750-12 1.85mm plug to 2.92mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/non-solder contact attachment method and a stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10750-12 can also be used in the other direction and will be a 2.92mm female 4 hole flange mount to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm jack 4 hole flange mount cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements.

1 : $397.62
10 : $381.72
25 : $365.81
100 : $349.91

PE3W01240-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Clamped SMA Male to SMA Male Low Loss Cable 12 Inch Length Using PE-P195 Coax., Radio frequency assembly clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01240-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W01240-12 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male to SMA male low loss cable 12 inch length using PE-P195 coax.

1 : $125.99
25 : $119.69
50 : $113.39
100 : $108.35

PE37120-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to Reverse Polarity TNC Male Cable 12 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to reverse polarity TNC male cable 12 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to reverse polarity TNC male cable 12 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE37120-12, can also be known as a low loss SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE37120-12 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37120-12 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 12 inch length using PE-C195 coax.

1 : $53.99
25 : $51.29
50 : $48.59
100 : $46.43

PE3C0121-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to N Male With Times Connectors Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to N male with times connectors cable 48 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N male with times connectors cable 48 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3C0121-48, can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121-48 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male with times connectors cable 48 inch length using LMR-195 coax.

PE3C1000-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and N type bulkhead cable connection on the other. Our low loss type N to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly, PE3C1000-12, can also be known as a low loss type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to N type jack cable assembly PE3C1000-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS.

1 : $345.99
25 : $328.69
50 : $311.39

PE3C100012-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Bulkhead Low Loss Space Cable 24 Inch Length Using PE-R200LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss space cable 24 inch length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead low loss space cable 24 inch length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss space SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C100012-24 can also be known as a low loss space SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.437-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100012-24 RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE3C100012-24 is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100012-24 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss space SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss space RF cable assembly as per your requirements.

1 : $435.99
10 : $418.55
25 : $401.11
100 : $383.67

PE3C1820-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable Using RG316 Coax In 12 Inch Legnth., Radio frequency assembly SMA male to SMA male cable using RG316 coax in 12 inch legnth from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable using RG316 coax in 12 inch legnth, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C1820-12, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1820-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable using RG316 coax in 12 inch legnth.

1 : $93.99
25 : $89.29
50 : $84.59
100 : $80.83

PE3C2180-12

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. TNC Female Bulkhead to TNC Female Bulkhead Low Loss Cable 12 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC female bulkhead to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC female bulkhead to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a female gender on end 1 and female on end 2. This TNC to TNC cable is a female to female coax assembly, PE3C2180-12, can also be known as a low loss TNC jack to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC jack cable assembly PE3C2180-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC female bulkhead to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC jack bulkhead to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC female bulkhead low loss cable 12 inch length using PE-P142LL coax, RoHS.

1 : $291.99
25 : $277.39
50 : $262.79

PE3C4870-12

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack 2 Hole Flange to SMP Female Right Angle Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to SMP female right angle cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to SMP female right angle cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and right angle SMP cable connection on the other. Our BMA to right angle SMP cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMP cable is a jack to female coax assembly, PE3C4870-12, can also be known as a BMA female to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMP jack cable assembly PE3C4870-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 22 GHz maximum frequency BMA jack 2 hole flange to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4870-12 can also be used in the other direction and will be right angle SMP female to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMP cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to SMP female right angle cable 12 inch length using PE-SR405FLJ coax.

1 : $151.99
25 : $144.39
50 : $136.79

TE Connectivity

1-440129-0

TE Connectivity

2.0MM,HSG,10POS Number of Positions: 10 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Standard Rectangular Connector | 10 Receptacle Housing With | Part Number: 1-440129-0 | Internal Number: 1-440129-0 | TE Connectivity
RoHS : Compliant

1,000 : $0.26
500 : $0.27
250 : $0.27
100 : $0.28
50 : $0.29
1 : $0.32

37,015

RT214012

TE Connectivity

RT214012 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form C SPDT-CO Contact Current Rating: 12 A General Purpose Power Relay DC Monostable 1 Form C SPDT-CO | Electromechanical Relay | Part Number: RT214012 | Internal Number: 5-1393239-4 | TE Connectivity
RoHS : Compliant

500 : $6.67
250 : $6.9
100 : $7.13
50 : $7.36
25 : $7.6
10 : $7.83
1 : $8.05

29,587

SQBW60120RJ

TE Connectivity

SQB60 120R (WIRE) 5% FASTON Resistance Value: 120 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 60 W Through-Hole Resistor | 120 Ω Wire Wound Power Resistor 5 % | Part Number: SQBW60120RJ | Internal Number: 5-2176632-1 | TE Connectivity
RoHS : Compliant

1,000 : $11.94
500 : $12.3
250 : $12.66
100 : $13.03
50 : $13.39
25 : $13.75
10 : $14.11
1 : $14.47

1,079

2401254-2

TE Connectivity

STRAIN RELIEF, AC Primary Product Color: Black Protection & Strain Relief Accessory Type: Strain Relief Cover Primary Product Material: PBT GF30 Strain Relief: Without Black Strain Relief Cover PBT GF30 Without | Automotive Connector Cap & Cover | Part Number: 2401254-2 | Internal Number: 2401254-2 | TE Connectivity
RoHS : Compliant

1 : $9.97

950

DRC23-40PC-N012

TE Connectivity

HDR, 40P, BLK, RA, AU/NI/CU, C PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 40 Number of Rows: 4 Centerline (Pitch): 4.42 mm Right Angle Wire-to-Board 40 | Deutsch Drc Header | Part Number: DRC23-40PC-N012 | Internal Number: DRC23-40PC-N012 | 4.42 mm | TE Connectivity
RoHS : Compliant

1 : $50.96

405

AEDC113NN00001215000

TE Connectivity

623 RECEPTACLE ANGLED ROTATABLE Connector System: Cable-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 17 Circular Connector Shell Size: 23 Sealable: No Cable-to-Panel Circular Connector Receptacle 17 23 | Standard Circular Connector | Part Number: AEDC113NN00001215000 | Internal Number: AGC113N00001215000 | TE Connectivity
RoHS : Compliant

25 : $26.22
10 : $28.23
1 : $30.25

240

T2030012008-000

TE Connectivity

DEF-0.75 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 18 AWG Wire Size: .75 mm² Gold (Au) Socket 18 AWG | Connector Contact | Part Number: T2030012008-000 | Internal Number: T2030012008-000 | TE Connectivity
RoHS : Compliant

1,000 : $6.54
500 : $6.74
250 : $6.94
100 : $7.14
50 : $7.34
25 : $7.53
10 : $7.73
1 : $7.93

382A012-12-0

TE Connectivity

382A012-12-0 Molded Part Shape: Y Shape Number of Branches: 3 Material Code: 12 Material Systems Code: 200 Adhesive Requirement: Adhesive Purchased Separately Y Shape 3 12 200 | Heat Shrinkable Cable Breakout And Cable Transition | Part Number: 382A012-12-0 | Internal Number: 811032-000 | Alias Number: 6-1196302-5 | TE Connectivity
RoHS : Compliant

1 : $97.03

T1340240129-000

TE Connectivity

H24B-TGH-RO-PG29 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1340240129-000 | Internal Number: T1340240129-000 | TE Connectivity
RoHS : Compliant

25 : $26.83
10 : $28.9
1 : $30.96

1-2273012-1

TE Connectivity

M8 x 1.0 Angled socket Pigtail LED Cable Assembly Type: M8 Pigtail Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 Pigtail 4 1.5 m 4.9 ft | M8 Pigtail & Right Angle & Led | Part Number: 1-2273012-1 | Internal Number: 1-2273012-1 | TE Connectivity
RoHS : Compliant

50 : $22.62
25 : $23.96
10 : $25.28
1 : $26.61

356012KFT

TE Connectivity

3560 12K 1% Resistance Value: 12K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Power Rating: 6 W Surface Mount Resistor | 12K Ω Thick Metal Film Power Resistor 1 % | Part Number: 356012KFT | Internal Number: 9-2176406-9 | TE Connectivity
RoHS : Compliant

1,000 : $2.63
500 : $2.71
250 : $2.79
100 : $2.87
50 : $2.95
25 : $3.03
10 : $3.11
1 : $3.19

T2100122101-000

TE Connectivity

HK4/8-012-M Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 12 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 12 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2100122101-000 | Internal Number: T2100122101-000 | TE Connectivity
RoHS : Compliant

25 : $54.08
10 : $58.24
1 : $62.4

1-2312501-2

TE Connectivity

M12 A-CODED F-5 CAB GLAND CONECTR FEMALE Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 5 Circular Connector Shell Size: 19 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 5 19 | M12 Straight D4 Pg Clamp | Part Number: 1-2312501-2 | Internal Number: 1-2312501-2 | TE Connectivity
RoHS : Compliant

25 : $327.7
10 : $352.89
1 : $378.11

T1220100125-000

TE Connectivity

H10B-TG-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1220100125-000 | Internal Number: T1220100125-000 | TE Connectivity
RoHS : Compliant

25 : $15.57
10 : $16.77
1 : $17.96

T1619030120-000

TE Connectivity

H3A-MAGSV-M20 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1619030120-000 | Internal Number: T1619030120-000 | TE Connectivity
RoHS : Compliant

50 : $11.07
25 : $11.73
10 : $12.38
1 : $13.03

Teledyne HiRel

5962-88543012A

Teledyne HiRel

IDENTITY COMPARATOR, 8-BIT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87549012A

Teledyne HiRel

NAND GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-87655012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-88702012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE
RoHS : Not Compliant

5962-86872012A

Teledyne HiRel

BUFFER/DRIVER, NAND, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-87625012A

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT
RoHS : Not Compliant

CY37064P100-125AXC

Teledyne HiRel

PLD, 64 MACROCELL, ELECTRICALLY ALTERABLE, 150 MHZ TOGGLE SPEED

5962-87663012A

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, BIDIRECTIONAL, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89689012A

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87622012A

Teledyne HiRel

DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant

5962-88706012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-89693012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87760012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89766012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89847012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

CRS0201-20W-3012FT

VENKEL LTD

Anti-Sulfuration CR;0201;1/20W;30.1K;�1%
RoHS : Compliant

CR0201-20W-3012FT

VENKEL LTD

Chip Resistor;0201;1/20W;30.1K;�1%
RoHS : Compliant

SSPI575720-120NU

VENKEL LTD

Square Shielded Power Inductor;575720;12uH;�30%
RoHS : Not Compliant

TA010TCR227MER0125

VENKEL LTD

Tantalum Chip Capacitor;10V;TCR;220uF;20%;E;125mohm
RoHS : Compliant

TA025TCR476KER0125

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;47uF;10%;E;125mohm
RoHS : Compliant

TA6R3TCR227MCR0125

VENKEL LTD

Tantalum Chip Capacitor;6.3V;TCR;220uF;20%;C;125mohm
RoHS : Compliant

RMPI252012GE-220MT

VENKEL LTD

Rect Min Power Inductor;252012;General;Epoxy;22uH;�20%
RoHS : Compliant

PWCR0402-AK-3012FT

VENKEL LTD

Pulse Withstanding CR;0402;1/5W;�100PPM;30.1K;�1%
RoHS : Compliant

TFCR0201-20W-C-1020DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;102R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-1101DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;1.1K;�0.5%
RoHS : Compliant

TFCR0201-20W-C-1471DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;1.47K;�0.5%
RoHS : Compliant

TFCR0201-20W-C-3091DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;3.09K;�0.5%
RoHS : Compliant

TFCR0201-20W-C-32R4DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;32.4R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-43R2DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;43.2R;�0.5%
RoHS : Compliant

TFCR0201-20W-C-6340DT

VENKEL LTD

Thin Film CR;0201;1/20W;�50PPM;634R;�0.5%
RoHS : Compliant

Waytek, Inc.

33012-3001

Molex

Socket Terminal 14-16GA 5000/Reel 33012-3001 D Wind
RoHS : Compliant

5,000 : $0.0671
25,000 : $0.0619

10,000

151-01224

HellermannTyton

HellermannTyton 151-0122 hi-torque cable tie is a high-strength bundling tie built for demanding wire, cable, hose, and tubing applications. Its heavy-duty locking design supports secure retention, dependable hold, and cleaner harness management where higher fastening force is needed.
RoHS : Compliant

1 : $3.6625
200 : $3.4009
500 : $3.1594

4,767

19070-0121

Molex

12-10 GA #8 Ring Terminal Yellow Insulated Vinyl
RoHS : Compliant

50 : $0.1797
200 : $0.1732
500 : $0.1666
1,000 : $0.159
5,000 : $0.1525

4,681

19205-0012

Molex

3/0 GA Butt Connector Non-Insulated Seamless

1 : $3.8783
10 : $3.5183
50 : $3.2384
100 : $2.8387
200 : $2.6387
500 : $2.5455

4,417

AT60-220-1231

Amphenol Sine Systems

ATP/AHD-6 Male Gold Pin Contact 14-12 GA Size 12 Solid 0460-220-1231

5 : $1.4596
10 : $1.3793
50 : $1.3282
100 : $1.2553
200 : $1.2188
500 : $1.1239

3,058

57120 OR 611-012

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #12 Band 1/2" 1/2" TO 1-1/4"

10 : $1.4053
50 : $1.2543
100 : $1.1381
200 : $1.1033
500 : $1.0627
1,000 : $1.0221

2,705

22AWC00125

Essentra Components

1/8" Adhesive Backed Clamp Natural, Bundle Diameter UL APPROVED NYLON 94V-2

100 : $0.3567
200 : $0.3121
500 : $0.2864
1,000 : $0.2607
5,000 : $0.2401

1,318

3901-2021

Molex

2 Pin Panel Mount Plug Mini Fit JR MOLEX PN 39012021

25 : $0.264
50 : $0.253
100 : $0.242
200 : $0.231
500 : $0.22
1,000 : $0.22

940

15600-12-20

Eaton Electronics

ATO / ATC Fuse Block 12 Gang No Ground

1 : $27.49
5 : $25.91
10 : $24.05
20 : $23.79
50 : $23.0
100 : $22.07

581

684-2421-012-02

Trombetta

24V Powerseal DC Relay Contactor 4 Terminals

1 : $24.26
5 : $21.66
10 : $20.24
50 : $19.05
100 : $18.22
200 : $17.28

125

DB012NDB-DROSS

Drossbach Inc

Corrugated Loom Nylon .50" ID Blk w/Gray Stripe, 100' Dispenser Box

1 : $75.23
5 : $62.86

1800-E1-1-2E-0150-12

15A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.2
100 : $15.37
200 : $14.64

624 1674 3 012 RT

Rennsteig Tools Inc

Crimp Die Set for OCS 1.5mm comes w/1 Die Set, 1 Locator, 1 Wire Stop. 22-20 Ga Range

1 : $367.45
10 : $358.44

AT62-16-0122

Amphenol Sine Systems

AT/AHD-9 Female Reel Socket Contact 18-16GA SIZE 16 S&F 4,000/Reel 1062-16-0122

4,000 : $0.2818
20,000 : $0.266

AT62-16-0122

Amphenol Sine Systems

AT/AHD-9 Female Loose Socket Contact 18-16GA SIZE 16 S&F 1062-16-0122 Nickel Plated

25 : $0.357
50 : $0.3436
100 : $0.3324
200 : $0.3145
500 : $0.3034
1,000 : $0.2922

Win Source Electronics

UPZ2012E601-2R0TF

Sunlord

RoHS : Compliant

5,640 : $0.0532
4,220 : $0.0593
3,265 : $0.0613
2,370 : $0.0634
1,530 : $0.0654
630 : $0.0797

908,000

50012-8000

Molex

2.00mm (.079") Pitch Crimp Terminal, Reel, for 51006 Housing
RoHS : Compliant

20,550 : $0.0164
15,340 : $0.0183
11,835 : $0.0189
8,625 : $0.0195
5,560 : $0.0202
2,285 : $0.0245

900,000

SP3012-04UTG-1

Littelfuse Inc

1,945 : $0.1997
1,560 : $0.2079
1,200 : $0.2162
835 : $0.2328
540 : $0.2411
255 : $0.2577

390,610

SI1012R

Vishay Huntington

N-Channel 1.8-V (G-S) MOSFET

1,620 : $0.208
1,210 : $0.232
935 : $0.24
680 : $0.248
440 : $0.256
180 : $0.3119

381,000

DFE252012F-R47M=P2

Murata Manufacturing Co Ltd

FIXED IND 470NH 4.9A 23 MOHM
RoHS : Compliant

3,810 : $0.0788
2,845 : $0.0879
2,200 : $0.091
1,600 : $0.094
1,035 : $0.097
425 : $0.1182

180,000

TPSD226K035R0125

Kyocera AVX Components

CAP TANT 22UF 35V 10% 2917
RoHS : Compliant

152 : $1.9766
114 : $2.2047
88 : $2.2807
64 : $2.3567
42 : $2.4327
17 : $2.9649

120,000

ACM2012-201-2P-T002

TDK Corporation

CMC 350MA 2LN 200 OHM SMD
RoHS : Compliant

5,115 : $0.0587
3,820 : $0.0655
2,955 : $0.0677
2,145 : $0.07
1,390 : $0.0722
570 : $0.088

118,000

C2012X7R1E105KT000N

TDK Corporation

RoHS : Compliant

15,960 : $0.0188
11,965 : $0.0209
9,260 : $0.0216
6,700 : $0.0224
4,330 : $0.0231
1,780 : $0.0281

71,510

DMG1012T-13

Diodes Incorporated

MOSFET N-CH 20V 630MA SOT523 T&R
RoHS : Compliant

7,920 : $0.0424
6,350 : $0.0441
4,880 : $0.0459
3,410 : $0.0493
2,195 : $0.0511
1,030 : $0.0545

35,390

1206L150/12SLYR

Littelfuse Inc

PTC RESET FUSE 12V 1.5A 1206
RoHS : Compliant

2,135 : $0.1406
1,595 : $0.1568
1,235 : $0.1622
895 : $0.1676
580 : $0.173
240 : $0.2109

30,487

0215012.MXEP

Littelfuse Inc

215 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse | FUSE CERAMIC 12A 250VAC 5X20MM
RoHS : Compliant

1,750 : $0.1717
1,305 : $0.1916
1,010 : $0.1982
735 : $0.2048
475 : $0.2114
195 : $0.2576

12,000

SRF2012-221YA

Bourns Inc

CMC 300MA 2LN 220 OHM SMD
RoHS : Compliant

765 : $0.3936
570 : $0.439
445 : $0.4542
320 : $0.4693
210 : $0.4845
85 : $0.5904

10,000

RZ03-1C4-D012

TE Connectivity

RELAY GEN PURPOSE SPDT 16A 12V / General Purpose Relay SPDT (1 Form C) 12VDC Coil Through Hole
RoHS : Compliant

131 : $2.2949
98 : $2.5597
76 : $2.648
55 : $2.7362
36 : $2.8245
15 : $3.4424

10,000

DS90LT012ATMF/NOPB

Texas Instruments

IC RCVR LVDS DIFF RTERM SOT23-5
RoHS : Compliant

250 : $1.2213
185 : $1.3622
145 : $1.4091
105 : $1.4561
70 : $1.5031
30 : $1.8319

9,300

DCP012415DBP-U

Texas Instruments

IC REG ISOLATED +/-15V 33MA 7SOP
RoHS : Compliant

35 : $9.8526
26 : $10.9896
20 : $11.3684
15 : $11.7475
10 : $12.1264
4 : $14.779

1,000

Wuhan P&S

VS-E5PH6012L-N3

Vishay Intertechnologies

Hyperfast Rectifier, 60A,1200V
RoHS : Compliant

1 : $7.72
100 : $2.58
500 : $2.38
1,000 : $2.32

89,000

NLV14012BDR2G

onsemi

RoHS : Compliant

1 : $0.46
100 : $0.3
500 : $0.24
1,000 : $0.23

55,000

VS-E5PH3012L-N3

Vishay Intertechnologies

Hyperfast Rectifier, 30A FRED Pt G5
RoHS : Compliant

1 : $5.65
100 : $1.89
500 : $1.75
1,000 : $1.7

31,325

10122655-101LF

Amphenol FCi

10Row,120P,2mm,Right Angle Receptacle
RoHS : Compliant

1 : $17.27
100 : $16.69
500 : $16.3
1,000 : $16.01

31,320

10127850-001LF

Amphenol FCi

Headers & Wire Housings,IDC Terminal,SMT
RoHS : Compliant

1 : $0.23
100 : $0.22
500 : $0.21
1,000 : $0.21

15,000

NTH4L012N065M3S

onsemi

SIC MOS TO247-4L 12MOHM 6
RoHS : Compliant

1 : $28.59
100 : $18.25
500 : $15.05
1,000 : $13.84

10,350

10124620-4444P00LF

Amphenol FCi

AirMax Power Connectors, Power Solutions, 2-Pair, 2 Column, 12-Position, Right Angle Receptacle, Press-Fit
RoHS : Compliant

1 : $5.65
100 : $2.26
500 : $2.09
1,000 : $2.04

STBR6012W

STMicroelectronics

-
RoHS : Compliant

1 : $15.4
100 : $5.14
500 : $4.75
1,000 : $4.62

NOIX1SN012KBLFB-GEVB

onsemi

1 : $2,265.8
100 : $1,446.26
500 : $1,192.53
1,000 : $1,096.36

NOIX1SE012KBLFB-GEVB

onsemi

1 : $2,265.8
100 : $1,446.26
500 : $1,192.53
1,000 : $1,096.36

012HF-R Reseller

Enlace URL