025-1206-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Cable 60 Inch Length Using RG142 Coax with HeatShrink., Radio frequency assembly N male to TNC male cable 60 inch length using RG142 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to TNC male cable 60 inch length using RG142 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02587/HS-60 can also be known as a type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W02587/HS-60 is built with RG142 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02587/HS-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 60 inch length using RG142 coax with heatshrink.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

2,710

PE3W02559/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 12 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W02559/HS-12 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02559/HS-12 RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W02559/HS-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02559/HS-12 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements.

1 : $55.69
25 : $52.91
50 : $50.12
100 : $47.89

607

PE3FCA270-25M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to ST UPC, OM3 Multimode Distribution Cable, 5.0mm LSZH, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA270-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 6-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA270-25M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements.

1 : $192.99
5 : $185.27
10 : $177.55
25 : $169.83

PE3FCA440-25M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber SC UPC to ST UPC, OM4 Multimode Distribution Cable, 6.2mm Riser, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA440-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 12-fiber cable assembly is equipped with SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA440-25M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

1 : $398.99
5 : $383.03
10 : $367.07
25 : $351.11

PE3C0253

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. N Male to SMA Male Low Loss Cable Using PE-P142LL Coax with HeatShrink., Radio frequency assembly N male to SMA male low loss cable using PE-P142LL coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to SMA male low loss cable using PE-P142LL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C0253, can also be known as a low loss N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C0253 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0253 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male low loss cable using PE-P142LL coax with heatshrink.

PE48025

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: RG405, Interface Type 2: PE-SR405AL, Interface Type 3: PE-SR405FL, Interface Type 4: PE-SR405FLJ, Interface Type 5: RG405 Tinned. SMA Female Right Angle Bulkhead Mount Connector Solder Attachment for RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ, RG405 Tinned. PE48025 SMA female right-angle bulkhead coaxial connector has an interface type of SMA female, which is compatible with RG405, PE-SR405AL, PE-SR405FL, PE-SR405FLJ and RG405 tinned cables, and has an impedance of 50 Ohms. Pasternack’s SMA female bulkhead connector uses solder as an attachment method. Our female SMA right-angle coaxial connector provides a maximum frequency of 6 GHz. This SMA female RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack right-angle SMA female bulkhead coaxial connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack’s SMA coaxial connector has a brass body with tri-metal plating. Our PE48025 SMA right-angle connector uses a beryllium copper inner contact and a brass outer contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 100 cycles or more. The PE48025 SMA bulkhead connector operates at a temperature range of -65 to 165 deg C. Our female SMA coaxial RF connector has a maximum insertion loss of 0.097 dB. This right-angle SMA connector has a gold over nickel over copper inner contact plating and a tri-metal outer contact plating. The Pasternack SMA female connector has a maximum operating voltage of 335 Vrms and a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our right-angle SMA female connector has a length of 0.78 inches, a width of 0.35 inches, and a weight of 0.0014 lbs. This radio frequency coaxial connector comes with a tri-metal-plated brass washer. This Pasternack right-angle female SMA bulkhead connector will ship the same business day as purchased. Our bulkhead SMA right-angle female coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $37.69
25 : $36.18
50 : $35.05
100 : $34.3

PE3M0252-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL-27478, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Temperature Conditioned N Male Right Angle to N Male Right Angle Low Loss Cable 48 Inch Length Using PE-P300LL Coax., Pasternack temperature conditioned N male right angle to N male right angle low loss cable 48 inch length using PE-P300LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0252-48 is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with right angle type N connection on one end and right angle type N connection on the other. Our low loss right angle N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly. PE3M0252-48 can also be known as a temperature conditioned low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day after it is purchased. N type plug to type N plug cable assembly PE3M0252-48 is built with PE-P300LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency N type right angle male to type N right angle male cable are located on the datasheet specifications PDF along with CAD drawing and dimensions, Pasternack high reliability low loss type N right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for same-day shipment worldwide. Variations of PE45225 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N male right angle to N male right angle low loss cable 48 inch length using PE-P300LL coax.

1 : $1,390.0
25 : $1,320.5
50 : $1,251.0
100 : $1,195.4

PE3M0257-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Male Cable 24 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0257-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0257-24 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0257-24 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMA pin to SMA male cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0257-24 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements.

1 : $139.99
10 : $134.39
25 : $128.79
100 : $123.19

PE3W02514-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Female Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly SMA male to SMA female cable 48 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and female on end 2. PE3W02514-48 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. SMA plug to SMA jack cable assembly PE3W02514-48 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W02514-48 RF cable are available on our downloadable PDF datasheet.PE3W02514-48 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0

PE3W02560

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Mini SMP Female to BNC Female Bulkhead Cable Using PE-SR405FL Coax. PE3W02560 is a Mini SMP female to BNC female bulkhead cable using PE-SR405FL coax. This Pasternack Mini SMP female to BNC female bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm BNC for connector 2. Our female Mini SMP to female BNC bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W02560 Mini SMP female to BNC female bulkhead cable assembly is constructed with PE-SR405FL coax.

PE3W02579/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Right Angle Cable Using RG142 Coax with HeatShrink. PE3W02579/HS is a TNC male right angle to SMA male right angle cable using RG142 coax. This Pasternack TNC male right angle to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02579/HS TNC male right angle to SMA male right angle cable assembly is constructed with RG142 coax.

PE3W02597

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMP Female to Mini SMP Female Cable Using PE-SR405FLJ Coax. PE3W02597 is a SMP female to Mini SMP female cable using PE-SR405FLJ coax. This Pasternack SMP female to Mini SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Our female SMP to female Mini SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W02597 SMP female to Mini SMP female cable assembly is constructed with PE-SR405FLJ coax.

PE3W20254

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Right Angle Cable Using RG303 Coax. PE3W20254 is a BNC male to BNC male right angle cable using RG303 coax. This Pasternack BNC male to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20254 BNC male to BNC male right angle cable assembly is constructed with RG303 coax.

PE3W24025

Pasternack Enterprises

Key Specifications, Connector Series 1: M39029, Connector Gender 1: Pin, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Push-on M39029 Pin to SMA Male Cable Using LMR-100 Coax. PE3W24025 is a M39029 pin to SMA male cable using LMR-100A coax. This Pasternack M39029 pin to SMA male cable assembly uses a 50 Ohm M39029 for connector 1 and a 50 Ohm SMA for connector 2. Our pin M39029 to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24025 M39029 pin to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10256

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assembly has male gender on end 1 and male on end 2. PE3C10256 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10256 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. BNC plug to BNC plug cable assembly PE3C10256 is built with LMR-400-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC and BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

Teledyne HiRel

8602501XA

Teledyne HiRel

STATIC RAM, 16 X 4, 2-PORT

8602501YA

Teledyne HiRel

STATIC RAM, 16 X 4, 2-PORT

Venkel Ltd.

TA025TCR476MDR0250

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;47uF;20%;D;250mohm
RoHS : Compliant

TA025TCR476KDR0250

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;47uF;10%;D;250mohm
RoHS : Compliant

C1206C0G302-5R0CNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;3000V;5pF;�0.25pF
RoHS : Compliant

C1206X7R202-561KNE

VENKEL LTD

HV Chip Capacitor;1206;X7R;2000V;560pF;�10%
RoHS : Compliant

C1206X7R102-562KNE

VENKEL LTD

HV Chip Capacitor;1206;X7R;1000V;5600pF;�10%
RoHS : Compliant

PWCR0805-RK-1025DT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;10.2M;�0.5%
RoHS : Compliant

SAFC2211C0G502-561JNE

VENKEL LTD

Safety Cap;2211;C0G;X1/Y2;560pF;�5%
RoHS : Compliant

TA025PCJ226MCR0100

VENKEL LTD

Polymer Tantalum Capacitor J-Lead;25V;PCJ;22uF;�20%;C;100mR
RoHS : Compliant

TA025TCM684KAR

VENKEL LTD

Tantalum Chip Capacitor;25V;TCM;0.68uF;�10%;A
RoHS : Compliant

TA025TCR225MBR1200

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;2.2uF;20%;B;1200mohm
RoHS : Compliant

TA025TCR335KAR1500

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;3.3uF;10%;A;1500mohm
RoHS : Compliant

TA025TCR475MBR1500

VENKEL LTD

Tantalum Chip Capacitor;25V;TCR;4.7uF;20%;B;1500mohm
RoHS : Compliant

C1206C0G102-561KNE

VENKEL LTD

HV Chip Capacitor;1206;C0G;1000V;560pF;�10%
RoHS : Compliant

TA016TCR226KCR0250

VENKEL LTD

Tantalum Chip Capacitor;16V;TCR;22uF;10%;C;250mohm
RoHS : Compliant

TA025PCJ106MBR0090

VENKEL LTD

Polymer Tantalum Capacitor J-Lead;25V;PCJ;10uF;�20%;B;90mR
RoHS : Compliant

Waytek, Inc.

0287025.PXCN

Littelfuse Inc

25 Amp ATOF Blade Type Fuse 32V Natural ATO
RoHS : Compliant

100 : $0.2046
200 : $0.1957
500 : $0.1634
1,000 : $0.1472
5,000 : $0.1391

16,040

CCP0.25BK 100

Techflex Inc

Techflex CCP0.25BK 100 Clean Cut Expandable Braided Sleeving is black 1/4" polyester sleeving on a 100' spool. It resists fraying when cut with scissors, offers high abrasion resistance, and fits expansion ranges from 5/32" to 7/16" for clean harness bundling and protection without a hot knife.

100 : $0.5081
500 : $0.4668

8,900

19025-0007

Molex

16-14 GA Male Disconnect .250x.032 Insulated Blue Nylon MALE DISCONNECT .250 X .032
RoHS : Compliant

50 : $0.2368
200 : $0.2243
500 : $0.2087
1,000 : $0.2005

8,764

19056-0025

Molex

22-18 GA 5/16" Ring Terminal Non-Insulated Brazed

100 : $0.282
200 : $0.2728
500 : $0.2466
1,000 : $0.2466
5,000 : $0.2466

6,976

19025-0005

Molex

12-10 GA Male Disconnect .250 X .032 Yellow Nylon Insulated
RoHS : Compliant

50 : $0.467
200 : $0.4454
500 : $0.4166
1,000 : $0.4004

6,247

5700250RD00R4

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is red adhesive-lined polyolefin tubing with a .250" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in spool applications.

500 : $0.9001
2,500 : $0.8474

3,500

50250N

Hillsdale Terminal & Tool Inc

Nylon Ring Terminal 12-10 Gauge 5/16" Stud

50 : $0.1781
200 : $0.1616
500 : $0.1444
1,000 : $0.131
5,000 : $0.1248

2,830

19221-0251

Molex

4/0 GA Tinned Eyelet 1/2" Stud
RoHS : Compliant

1 : $3.598
10 : $3.3425
50 : $3.1615
100 : $2.9593
200 : $2.7784
500 : $2.6613

1,620

7100025150

3M FP301-2-100' heat shrink tubing is black 2" thin-wall polyolefin on a 100' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where wide diameter coverage, flexible installation, and dependable commercial-grade heat shrink performance are needed.

100 : $4.01
500 : $3.86

1,000

7100025153

3M FP301-3/16-250' heat shrink tubing is black 3/16" thin-wall polyolefin on a 250' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where flexible installation and dependable commercial-grade heat shrink performance are needed.

250 : $1.0284
1,250 : $0.955

750

4902-557F

QuickCable Corporation

2 GA Battery Lug Terminal 3/8" Stud Stackable Tinned Locking Anti-Rotation Teeth

1 : $8.16
10 : $7.35
50 : $6.75
100 : $6.15
200 : $5.7
500 : $5.28

480

391002510

Molex

Eurostyle Two Screw Barrier Strips, 14-6 GA, 15mm Pitch 600V, 10 Pole, 63 Amps
RoHS : Compliant

1 : $8.46
10 : $8.14
50 : $7.16
100 : $6.81
200 : $6.13
500 : $5.92

394

4200250RD0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 1/4" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

10 : $2.1507
50 : $1.858
100 : $1.6862
200 : $1.5462
500 : $1.4571

221

5025

Blue Sea Systems

ST Blade Fuse Block ATO ATC 6 Circuits with Ground & Cover 100A PER BLOCK 30A PER CIRCUIT

1 : $50.4

F6N0.25X 200' BOX

Techflex Inc

Techflex F6N0.25X 200' BOX Flexo F6 Braided Split Sleeving is black 1/4" PET sleeving in a 200' box. It is split laterally for easy installation, uses 25% edge overlap to fully cover wires and connectors, and provides UV-resistant abrasion protection for organized wire routing.

200 : $0.5801
1,000 : $0.5323