| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
0266RLK-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() DigiKey | 0026605120 | Molex | CONN HEADER R/A 12POS 3.96MM RoHS : Compliant |
| 15,314 | |
TS02-66-150-BK-100-LCR-D![]() | Same Sky | SWITCH TACTILE SPST-NO 0.05A 12V RoHS : Compliant |
| 11,027 | ||
| 2420266-2 | TE Connectivity | SOCKET HSG 2P BLUE HCI 4.0 PITCH RoHS : Compliant |
| 9,835 | ||
TS02-66-60-BK-260-SCR-D![]() | Same Sky | SWITCH TACTILE SPST-NO 0.05A 12V RoHS : Compliant |
| 5,651 | ||
| 0026614030 | Molex | CONN HEADER VERT 3POS 3.96MM RoHS : Compliant |
| 5,338 | ||
| R5F10266ASP#35 | Renesas Electronics Corporation | IC MCU 16BIT 2KB FLASH 20LSSOP RoHS : Compliant |
| 1,734 | ||
TS02-66-130-BK-160-LCR-D![]() | Same Sky | SWITCH TACTILE SPST-NO 0.05A 12V RoHS : Compliant |
| 1,717 | ||
| 0026603050 | Molex | CONN HEADER R/A 5POS 3.96MM RoHS : Compliant |
| 1,711 | ||
TS02-66-100-BK-260-SCR-D![]() | Same Sky | SWITCH TACTILE SPST-NO 0.05A 12V RoHS : Compliant |
| 1,415 | ||
| N70266 | Automation Products Group | 568-266 CHLOROPRENE 70 ORINGS |
| 535 | ||
| 2202665 | Phoenix Contact | COMPONENT HOUSING COVER COLOR: L RoHS : Compliant |
| 22 | ||
| 0266075-50-10 | Gelmec | Sorbothane sheet 6x6x0.75", 50 S |
| 3 | ||
| 0266 | AMPCO USA | Wrench Open End 5/8" |
| 1 | ||
| 202661 | Di-Soric Gmbh & Co KG | LRV 51 M 1000 P3K-IBS |
| 1 | ||
| 2702660 | Phoenix Contact | AXL E IOL DI16 M12 6P RoHS : Compliant |
| 1 | ||
![]() Avnet Americas | CRCW0402665KFKED | Vishay Intertechnologies | SMD Chip Resistor, 665 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW0402665KFKED) RoHS : Compliant |
| 240,000 | |
| CRCW0402665RFKED | Vishay Intertechnologies | SMD Chip Resistor, 665 ohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW0402665RFKED) RoHS : Compliant |
| 230,000 | ||
| CRCW040266R5FKED | Vishay Intertechnologies | SMD Chip Resistor, 66.5 ohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW040266R5FKED) RoHS : Compliant |
| 210,000 | ||
| SRN4026-6R8M | Bourns Inc | - Tape and Reel (Alt: SRN4026-6R8M) RoHS : Compliant |
| 15,000 | ||
| TNPW040266K5BEED | Vishay Intertechnologies | Res Thin Film 0402 66.5K Ohm 0.1% 1/10W ?25ppm/?C Molded SMD SMD Paper T/R - Tape and Reel (Alt: TNPW040266K5BEED) RoHS : Compliant |
| 10,000 | ||
| 20026680-40 | TE Connectivity | Pressure Transmitter, IoT Wireless, Absolute, BSPP, 0 bar, 35 bar, 1/4", Connector" - Bulk (Alt: 20026680-40) RoHS : Not Compliant |
| 10 | ||
| 20026680-43 | TE Connectivity | Pressure Transmitter, IoT Wireless, Compound, NPT, 0 bar, 35 bar, 1/4", Connector" - Bulk (Alt: 20026680-43) RoHS : Not Compliant |
| 10 | ||
| 20026680-52 | TE Connectivity | Pressure Transmitter, IoT Wireless, Absolute, BSPP, 0 bar, 350 bar, 1/4", Connector" - Bag (Alt: 20026680-52) RoHS : Not Compliant |
| 10 | ||
| 20026680-41 | TE Connectivity | Pressure Transmitter, IoT Wireless, Compound, BSPP, 0 bar, 35 bar, 1/4", Connector" - Bulk (Alt: 20026680-41) RoHS : Not Compliant |
| 10 | ||
| 20026680-44 | TE Connectivity | Pressure Transmitter, IoT Wireless, Absolute, BSPP, 0 bar, 350 bar, 1/4", Connector" - Bulk (Alt: 20026680-44) RoHS : Not Compliant |
| 10 | ||
| 20026680-45 | TE Connectivity | Pressure Transmitter, IoT Wireless, Compound, BSPP, 0 bar, 350 bar, 1/4", Connector" - Bulk (Alt: 20026680-45) RoHS : Not Compliant |
| 10 | ||
| 20026680-42 | TE Connectivity | Pressure Transmitter, IoT Wireless, Absolute, NPT, 0 bar, 35 bar, 1/4", Connector" - Bulk (Alt: 20026680-42) RoHS : Not Compliant |
| 7 | ||
| 20026680-47 | TE Connectivity | Pressure Transmitter, IoT Wireless, Compound, NPT, 0 bar, 350 bar, 1/4", Connector" - Bulk (Alt: 20026680-47) RoHS : Not Compliant |
| 3 | ||
| R5F10266ASP#35 | Renesas Electronics Corporation | - Trays (Alt: R5F10266ASP#35) RoHS : Compliant |
| 0 | ||
| RCMS02665R0FHA20 | Vishay Intertechnologies | Resistor, 665 Ohm, ? 1%, 125 mW/250 mW/500 mW, Axial Leaded, Metal Film, High Stability - Ammo Pack (Alt: RCMS02665R0FHA20) RoHS : Compliant |
| 0 | ||
![]() Newark | CRCW0402665KFKED | Vishay Intertechnologies | RES, 665K, 1%, 0.063W, 0402, THICK FILM; RoHS : Compliant |
| 30,000 | |
| CRCW0402665KFKED | Vishay Intertechnologies | CHIP RES SMD, 665K, ±1%, 62.5MW; RoHS : Compliant |
| 20,000 | ||
| CRCW0402665KFKED | Vishay Intertechnologies | CHIP RES SMD, 665K, ±1%, 62.5MW; RoHS : Compliant |
| 20,000 | ||
| CRCW0402665RFKED | Vishay Intertechnologies | RES, 665R, 1%, 0.063W, 0402, THICK FILM; RoHS : Compliant |
| 9,990 | ||
| CRCW0402665KFKED | Vishay Intertechnologies | RES, 665K, 1%, 0.063W, 0402, THICK FILM; RoHS : Compliant |
| 7,813 | ||
| CRCW0402665KFKED | Vishay Intertechnologies | RES, 665K, 1%, 0.063W, 0402, THICK FILM; RoHS : Compliant |
| 7,813 | ||
TS02-66-60-BK-100-LCR-D![]() | Same Sky | TACTILE SWITCH, SPST, 6 X 6MM, 6MM HEIGH; RoHS : Compliant |
| 4,000 | ||
| 2420266-3 | TE Connectivity | RECT POWER HOUSING, RCPT, 3POS, 4MM; RoHS : Compliant |
| 3,000 | ||
| 2420266-5 | TE Connectivity | RECT POWER HOUSING, RCPT, 5POS, 4MM; RoHS : Compliant |
| 2,980 | ||
| 2420266-2 | TE Connectivity | RECT POWER HOUSING, RCPT, 2POS, 4MM; RoHS : Compliant |
| 2,500 | ||
| PLS00266 | Pulse Electronics Corporation | LEAD, XLR DMX, 3P, 2M; (Alternate Part Number: 5051259017450 RoHS : Compliant |
| 43 | ||
| 3026654 | Phoenix Contact | TERMINAL BLOCK, 4POS, 2LEVEL, 32A, 24V; RoHS : Compliant |
| 42 | ||
| MP002665 | SPC Multicomp | CIRCULAR CONNECTOR, 7POS, PLUG, SOLDER; RoHS : Compliant |
| 20 | ||
| PELB0266 | Pro Elec | CABLE GLAND, PA/NBR, 4MM-8MM, RED; RoHS : Compliant |
| 8 | ||
| 2702663 | Phoenix Contact | COUPLING RELAY, DPST-NO/NC, 24V/5A/SCREW; RoHS : Compliant |
| 3 | ||
![]() RS | C21-B0-26-620-23A-DG (C21B02662023ADG|C21-B0-26-620-23A-DG|C21B02662023ADG) | Carling Technologies | CIRCUIT BREAKER HYD/MAG 1-P 2-COLOR VISI-ROCKER 50/60HZ LONG DELAY 20A |
| 513 | |
| CA2-B0-26-660-321-C (CA2B026660321C | CA2-B0-26-660-321-C | CA2B026660321C) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 2P SERIESTRIP 50/60HZ LONG 60A STUD DUAL LEGEND |
| 287 | ||
| EA2-B0-26-630-32E-HB (EA2B02663032EHB | EA2-B0-26-630-32E-HB | EA2B02663032EHB) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 2P 50/60HZLONG 30A BOX WIRE CONNECTOR DUAL LEGEND |
| 140 | ||
| EA2-B0-26-615-32E-HB (EA2B02661532EHB | EA2-B0-26-615-32E-HB | EA2B02661532EHB) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 2P 50/60HZLONG 15A BOX WIRE CONNECTOR DUAL LEGEND |
| 107 | ||
| AA1-B0-26-625-3D1-C (AA1B0266253D1C|AA1-B0-26-625-3D1-C|AA1B0266253D1C) | Carling Technologies | CIRCUIT BREAKER HYDRAULIC MAGNETIC 1 POLE DC 50/60HZ 25A SCREW ON-OFF LEGEND |
| 62 | ||
| EA2-B0-26-660-32E-HB (EA2B02666032EHB | EA2-B0-26-660-32E-HB | EA2B02666032EHB) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 2P 50/60HZLONG 60A BOX WIRE CONNECTOR DUAL LEGEND |
| 51 | ||
| EA2-B0-26-610-32E-HB (EA2B02661032EHB | EA2-B0-26-610-32E-HB | EA2B02661032EHB) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 2P 50/60HZLONG 10A BOX WIRE CONNECTOR DUAL LEGEND |
| 24 | ||
| EA3-B0-26-640-32E-HB (EA3B02664032EHB|EA3-B0-26-640-32E-HB|EA3B02664032EHB) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 3P |
| 14 | ||
| EA3-B0-26-610-32E-HB (EA3B02661032EHB | EA3-B0-26-610-32E-HB | EA3B02661032EHB) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 3P 50/60HZLONG 10A BOX WIRE CONNECTOR DUAL LEGEND |
| 11 | ||
| EA1-B0-26-660-32E-FB (EA1B02666032EFB | EA1-B0-26-660-32E-FB | EA1B02666032EFB) | Carling Technologies | CIRCUIT BREAKER EA1-B0-26-660-32E-FB |
| 8 | ||
| AG2-B0-26-615-113-D (AG2B026615113D|AG2-B0-26-615-113-D|AG2B026615113D) | Carling Technologies | CIRCUIT BREAKER HYD/MAG 2P VISI-ROCKER W/GUARD 50/60HZ LONG DEL 15A 277VAC/80VDC |
| 6 | ||
| EA1-B0-26-630-32E-CC (EA1B02663032ECC|EA1-B0-26-630-32E-CC|EA1B02663032ECC) | Carling Technologies | CIRCUIT BREAKER HYDRAULIC MAGNETIC 1 POLE 30A DUAL LEGEND BOX WIRE |
| 5 | ||
| EA2-B0-26-630-1DA-CC (EA2B0266301DACC|EA2-B0-26-630-1DA-CC|EA2B0266301DACC) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 2P SERIESTRIP 50/60HZ LONG 30A STUD ON/OFF LEGEND |
| 5 | ||
| AD1-B0-26-620-1A1-D (AD1B0266201A1D | AD1-B0-26-620-1A1-D | AD1B0266201A1D) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 4 | ||
| AG2-B0-26-625-511-D (AG2B026625511D | AG2-B0-26-625-511-D | AG2B026625511D) | Carling Technologies | CIRCUIT BREAKER, A-SERIES, HYDRAULIC-MAGNETIC |
| 1 | ||
![]() Microchip Technology Inc | ZL30266LDG1 | Microchip Technology Inc | Quad Freq Family 10 o/p 2 APLL Int ROM, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 270 | |
| 090-02660-000 | Microchip Technology Inc | OCXO, 9635QT 10 MHZ LOW G COTS SPACE FM, HERMETIC QUICK TURN, Projected EOL: 2051-01-13 - Contact for Pricing RoHS : Not Compliant | 0 | |||
| 148-02660-000 | Microchip Technology Inc | Synchronous Buck Regulator 4.5V to 24V input 8 Amp, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
| DSC1001BL5-026.6500 | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.65MHz, 10PPM, 1.8-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2045-12-19 RoHS : Compliant |
| 0 | ||
| DSC1001CI2-026.6363 | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6363MHz, 25PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-04 RoHS : Compliant |
| 0 | ||
| DSC1001CI5-026.6000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6MHz, 10PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-09-23 RoHS : Compliant |
| 0 | ||
DSC1001DI2-026.6000![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-03-28 RoHS : Compliant |
| 0 | ||
| DSC1001DL2-026.6500 | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.65MHz, 25PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-02-10 RoHS : Compliant |
| 0 | ||
| DSC1004CI5-026.6000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6MHz, 10PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-09-23 RoHS : Compliant |
| 0 | ||
| DSC1001BL5-026.6500T | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.65MHz, 10PPM, 1.8-3.3V, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2045-12-19 RoHS : Compliant |
| 0 | ||
| DSC1001CI2-026.6363T | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6363MHz, 25PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-04 RoHS : Compliant |
| 0 | ||
| DSC1001CI5-026.6000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6MHz, 10PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-09-23 RoHS : Compliant |
| 0 | ||
DSC1001DI2-026.6000T![]() | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6MHz, 25PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-03-28 RoHS : Compliant |
| 0 | ||
| DSC1001DL2-026.6500T | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.65MHz, 25PPM, 1.8-3.3V, -40 to 105C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-02-10 RoHS : Compliant |
| 0 | ||
| DSC1004CI5-026.6000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 26.6MHz, 10PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2045-09-23 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 0.156X0.266X0.032FLT SS PS | WASHERS | 4,007 | |||
| 5710-266-60-P | Seastrom Mfg | 2,182 | ||||
| 10266D | Micro Dimensional Products Inc | 1,014 | ||||
| 5710-266-16 | Seastrom Mfg | 1,000 | ||||
| 5602-6-62 | Seastrom Mfg | 630 | ||||
| 5710-26-60 | Seastrom Mfg | 416 | ||||
| T051-270-266-L | ARaymond Network | 301 | ||||
| 1026-6 | Zierick Manufacturing Corporation | 287 | ||||
| 5710-266-30 | Seastrom Mfg | 207 | ||||
| 5710-266-90 | Seastrom Mfg | 200 | ||||
| 4026-632-SS | RAF Electronic Hardware | 102 | ||||
| C8026-6-600 | Tinnerman Fasteners | 34 | ||||
| 120-266E3-3 | Saturn Fasteners Inc | 9 | ||||
| 1102-66-0519 | Staffall | 6 | ||||
| AES10-266ZYR | MISC. Thermal Management | 2 | ||||
![]() Rochester Electronics | 62-0266PBF | Infineon Technologies AG | Semiconductor | 7,860 | ||
| TT8050266133 Y019 | Intel Corporation | Microprocessor, Pentium, x86 Arch., 32-Bit, 133MHz, BICMOS |
| 15,997 | ||
| R5F10266ASP#35 | Renesas Electronics Corporation | R5F10266 - 16-Bit MCU RL78 Low Power, High Function MCU RoHS : Compliant |
| 5 | ||
R5F10266ASP#V0![]() | Renesas Electronics Corporation | R5F10266 - 16-Bit MCU RL78 Low Power, High Function MCU ' RoHS : Compliant |
| 27 | ||
| R5F10266ASP#V5 | Renesas Electronics Corporation | 16-Bit MCU RL78 Low Power, High Function MCU RoHS : Compliant |
| 485 | ||
| R5F10266DSP#V5 | Renesas Electronics Corporation | Compact, Low Power Microcontrollers for General Purpose Applications Ideal for Sub-MCUs RoHS : Compliant |
| 214 | ||
| R5F10266GSP#V5 | Renesas Electronics Corporation | 16-Bit MCU RL78 Low Power, High Function MCU RoHS : Compliant |
| 530 | ||
| R5F10266GSP#X5 | Renesas Electronics Corporation | Compact, Low Power Microcontrollers for General Purpose Applications Ideal for Sub-MCUs RoHS : Compliant |
| 20,000 | ||
| 570BBC000266DG | Skyworks Solutions Inc | Differential/single-ended; I2C programmable XO; OE pin 2; 10-1417 MHz RoHS : Compliant |
| 68 | ||
![]() Sager | BA2-B0-26-610-12A-D | Carling Technologies | Circuit Breakers BA2B02661012AD RoHS : Compliant |
| 0 | |
| BA2-B0-26-620-51A-C3 | Carling Technologies | Circuit Breakers BA2B02662051AC3 RoHS : Compliant |
| 0 | ||
| BA2-B0-26-625-211-D | Carling Technologies | Circuit Breakers BA2B026625211D RoHS : Compliant |
| 0 | ||
| BB2-B0-26-610-12B-C3 | Carling Technologies | Circuit Breakers BB2B02661012BC3 RoHS : Compliant |
| 0 | ||
| BB2-B0-26-615-112-D | Carling Technologies | Circuit Breakers BB2B026615112D RoHS : Compliant |
| 0 | ||
| BB2-B0-26-620-511-C | Carling Technologies | Circuit Breakers BB2B026620511C RoHS : Compliant |
| 0 | ||
| BB2-B0-26-650-521-C | Carling Technologies | Circuit Breakers BB2B026650521C RoHS : Compliant |
| 0 | ||
| BB2-B0-26-650-G12-E | Carling Technologies | Circuit Breakers BB2B026650G12E RoHS : Compliant |
| 0 | ||
| BB2-D0-26-615-121-D | Carling Technologies | Circuit Breakers BB2D026615121D RoHS : Compliant |
| 0 | ||
| B51-B0-26-620-C1D-K3 | Carling Technologies | Circuit Breakers B51B026620C1DK3 |
| 0 | ||
| C12-B0-26-610-23A-CJ | Carling Technologies | Circuit Breakers C12B02661023ACJ RoHS : Compliant | 0 | |||
| CB2-B0-26-616-122-C | Carling Technologies | Circuit Breakers CB2B026616122C RoHS : Compliant | 0 | |||
| CB2-B0-26-650-322-E | Carling Technologies | Circuit Breakers CB2B026650322E RoHS : Compliant |
| 0 | ||
| CF2-B0-26-650-644-D | Carling Technologies | Circuit Breakers CF2B026650644D RoHS : Compliant |
| 0 | ||
| CD1-B0-26-615-21B-DG | Carling Technologies | Circuit Breakers CD1B02661521BDG RoHS : Compliant | 0 | |||
![]() TME | 3-2600026-6 | TE Connectivity | Connector: wire-wire; male; crimped; brown; Locking: latch RoHS : Compliant |
| 10,400 | |
| 2420266-6 | TE Connectivity | Female; PIN: 6; straight; for cable; crimped; tinned; blue; PBT; 4mm RoHS : Compliant |
| 5,000 | ||
| 10266151 | Essentra Components | Washer; round; h=1.4mm; D=7mm; polyamide; natural |
| 1,000 | ||
| 5907570026681 | Jonex | Extension lead; H03VV-F; 3G1.5mm2; 5m; PVC; black; Sockets no: 3 |
| 8 | ||
| 095-850-266-048 | Amphenol RF | Cable; 1.219m; BNC male,both sides; angled,straight; 50Ω |
| 0 | ||
| 10026616 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 50; THT; 3A; 125V; BL 4 |
| 0 | ||
| 10026620 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 54; THT; 3A; 125V; BL 4 |
| 0 | ||
| 10026661 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 15; THT; 3A; 150V; BL 5 |
| 0 | ||
| 10026698 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 13; THT; 3A; 150V; BL 5 |
| 0 | ||
| 102666 | MCI Transformer Corporation | Patch cord; F/UTP; Cat 6; stranded; Cu; 0.4m; LSZH; red; 26/7AWG |
| 0 | ||
| 0026610 | Lapp Group | Wire: mains; 1x35mm2; PVC; black; stranded; Cu; ÖLFLEX® FD 90 RoHS : Compliant |
| 0 | ||
| 0026651 | Lapp Group | Wire: mains; ÖLFLEX® FD 90 CY; 1x10mm2; orange; stranded; Cu; 9.7mm RoHS : Compliant |
| 0 | ||
| 10026617 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 50; THT; 3A; 125V; BL 4 |
| 0 | ||
| 10026621 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 54; THT; 3A; 125V; BL 4 |
| 0 | ||
| 10026658 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 12; THT; 3A; 150V; BL 5 |
| 0 | ||
![]() ComSIT USA | 90266700 | ORTEGA | AVAILABLE EU | 4,950 | ||
![]() ComSIT USA | 1702662 | TE Connectivity | Quick Connect and Disconnect Terminal Female 10-12 AWG 6.35mm Crimp RoHS : Compliant | 3,000 | ||
| A8050266100-SL2TU | Intel Corporation | EMBEDDED PENTIUM PROCESSOR Microprocessor, 32-Bit, 100MHz, BICMOS, CPGA296 RoHS : Not Compliant | 346 | |||
| A8050266100SL2TU | Intel Corporation | EMBEDDED PENTIUM PROCESSOR Microprocessor, 32-Bit, 100MHz, BICMOS, CPGA296 RoHS : Not Compliant | 40 | |||
![]() Interstate Connecting Components | 38002-0266 | Molex | TERM FTVRVR SN/B |
| 3,295 | |
| 4-1879026-6 | TE Connectivity | YR1 0.1% 27R4 RoHS : Compliant |
| 0 | ||
| 8070-2669-02NF12-26S1A | Glenair Inc | MM NETT WARRIOR | 0 | |||
| D80266-000 | TE Connectivity | BCAC-8D/14-01(B6) RoHS : Compliant | 0 | |||
| 2420266-2 | TE Connectivity | SOCKET HSG 2P BLUE HCI 4.0 PIT RoHS : Compliant | 0 | |||
| 2570-2662-ME23-35PNSN | Glenair Inc | SAV-CON 38999 100#22D PLG PIN / RECP SKT | 0 | |||
| 20026618-23 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 11026655-00 | TE Connectivity | EPL-D12-1.5B RoHS : Not Compliant | 0 | |||
| 2420266-3 | TE Connectivity | SOCKET HSG 3P BLUE HCI 4.0 PIT RoHS : Compliant | 0 | |||
| 2570-2661-ME23-35PASA | Glenair Inc | SAV-CON 38999 100#22D PLG PIN / RECP SKT | 0 | |||
| SA85002660902 | SOURIAU-SUNBANK | J38601 | 0 | |||
| 20026696-00 | TE Connectivity | MT2E1-50E-22-188-M1A: CTO-1150 | 0 | |||
| 20026698-00 | TE Connectivity | MT2E1-50E-9-188-M1A: CTO-11500 RoHS : Compliant | 0 | |||
| 2420266-5 | TE Connectivity | SOCKET HSG 5P BLUE HCI 4.0 PIT RoHS : Compliant | 0 | |||
| 5-1879026-6 | TE Connectivity | YR1 0.1% 316K RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | CRCW0402665RFKED | Vishay Huntington | 4,664 | |||
| 0026644160 | Molex | 240 | ||||
![]() PEI Genesis | 23A02664-19 | SOURIAU-SUNBANK |
| 0 | ||
| 23A02664-6 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-64 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-7 | SOURIAU-SUNBANK |
| 0 | |||
| CA140266-27 | ITT Interconnect Solutions |
| 0 | |||
| 23A02664-56 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-9 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-57 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-17 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-62 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-18 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-5 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-63 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02664-31 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02662-19 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | M55302/66-30F | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 403 | |
| 5-1879026-6 | TE Connectivity | Resistors RoHS : Compliant |
| 350 | ||
| M55302/66-L14H | AirBorn a molex company | Military Rectangular PCB Connector |
| 212 | ||
| M55302/66L50M | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 207 | ||
| M55302/66L10M | AirBorn a molex company | Military Rectangular PCB Connector |
| 196 | ||
| M55302/66-44S | Incon Inc | MIL M55302 |
| 131 | ||
| M55302/66-30L | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 94 | ||
| M55302/66L26H | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 92 | ||
| M55302/66-70L | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 80 | ||
| M55302/66-60M | AirBorn a molex company | MIL-DTL-55302 Series Connector RoHS : Compliant |
| 80 | ||
| M55302/66L24L | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 58 | ||
| M55302/66L50S | Incon Inc | MIL M55302 |
| 39 | ||
| M55302/66L66F | AirBorn a molex company | MIL-DTL-55302 Series Connector |
| 28 | ||
| M55302/66-54H | AirBorn a molex company | Military Rectangular PCB Connector |
| 1 | ||
| M55302/66-54H | Incon Inc | Connector |
| 1 | ||
![]() Richardson RFPD | 2026-6010-10 | MACOM | RF Couplers Uni-directional Coupling 10dB 0.5GHz t RoHS : Not Compliant |
| 3 | |
| 85026688 | HUBER+SUHNER | Antenna Omni-Directional 2dBi Gain 2690MHz RoHS : Compliant |
| 0 | ||
| 2026 6001 10 | MACOM | RF Couplers Uni-directional Coupling 10dB 1GHz to |
| 0 | ||
| 84080266 | HUBER+SUHNER | Conn Type N Adapter 690MHz to 2200MHz 50Ohm T Styl RoHS : Compliant |
| 0 | ||
| 570BBB000266DGR | Skyworks Solutions Inc | Oscillator XO 15MHz ±31.5ppm LVDS 55% 3.3V 8-Pin S RoHS : Compliant |
| 0 | ||
| 530FB000266DG | Skyworks Solutions Inc | Oscillator XO 173.3708MHz ±31.5ppm LVDS 55% 2.5V 6 RoHS : Compliant |
| 0 | ||
| 570CCC000266DG | Skyworks Solutions Inc | Oscillator XO 15MHz ±20ppm 15pF CMOS 55% 3.3V 8-Pi RoHS : Compliant |
| 0 | ||
| 570CCC000266DGR | Skyworks Solutions Inc | Oscillator XO 15MHz ±20ppm 15pF CMOS 55% 3.3V 8-Pi RoHS : Compliant |
| 0 | ||
| 571BCB000266DG | Skyworks Solutions Inc | Oscillator VCXO 15MHz 1.5ppm (Tol) ±50ppm (Stabili RoHS : Compliant |
| 0 | ||
11026637-00![]() | TE Connectivity | Pressure Transducers RoHS : Compliant | 0 | |||
| 2026 6004 10 | MACOM | RF Couplers Uni-directional Coupling 10dB 2GHz to |
| 0 | ||
| 571BCB000266DGR | Skyworks Solutions Inc | Oscillator VCXO 15MHz 1.5ppm (Tol) ±50ppm (Stabili RoHS : Compliant |
| 0 | ||
| 599CDC000266DGR | Skyworks Solutions Inc | Oscillator VCXO 15MHz ±20ppm (Stability) 15pF CMOS RoHS : Compliant |
| 0 | ||
| 22660266 | HUBER+SUHNER | Conn Type N 0Hz to 11GHz 50Ohm Crimp ST Cable Moun RoHS : Compliant |
| 0 | ||
| 570BBB000266DG | Skyworks Solutions Inc | Oscillator XO 15MHz ±31.5ppm LVDS 55% 3.3V 8-Pin S RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 3-2600026-6 | TE Connectivity | INSTOCK RoHS : Compliant | 13,520 | ||
| 68603-0266 | Molex | INSTOCK | 13,000 | |||
| 1-2600026-6 | TE Connectivity | INSTOCK | 6,500 | |||
| MGPWT-00266-P | TE Connectivity | INSTOCK | 3,185 | |||
| M(6188-0266) | INSTOCK | 2,074 | ||||
| 0026604120 | Molex | INSTOCK RoHS : Compliant | 2,000 | |||
| Y.DA5-M2.5X14 ZG102668 | INSTOCK | 1,088 | ||||
| XC00266 | INSTOCK | 479 | ||||
| NT-2030266-02 | INSTOCK | 400 | ||||
| NT-2030266-03 | INSTOCK | 255 | ||||
| 0026615120 | Molex | INSTOCK RoHS : Compliant | 134 | |||
| A8050266-100-SY007 | Intel Corporation | INSTOCK | 130 | |||
| 102668 | Jauch Quartz America | INSTOCK | 100 | |||
| CRCW040266K5FK | Vishay Intertechnologies | INSTOCK | 39 | |||
| 0026615020 | DIGIKE | INSTOCK | 6 | |||
![]() Avnet Abacus | CRCW0402665RFKED | Vishay Intertechnologies | SMD Chip Resistor 665 ohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW0402665RFKED) RoHS : Compliant | 190,000 | ||
| CRCW040266K5FKED | Vishay Intertechnologies | SMD Chip Resistor 665 kohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW040266K5FKED) RoHS : Compliant | 50,000 | |||
| TNPW040266K5BEED | Vishay Intertechnologies | Res Thin Film 0402 665K Ohm 01 110W 25ppmC Molded SMD SMD Paper TR - Tape and Reel (Alt: TNPW040266K5BEED) RoHS : Compliant | 10,000 | |||
| 2026-60-C2FLF | Bourns Inc | (Alt: 2026-60-C2FLF) RoHS : Compliant | 500 | |||
| 2420266-2 | TE Connectivity | (Alt: 2420266-2) RoHS : Compliant | 0 | |||
| 2420266-3 | TE Connectivity | (Alt: 2420266-3) RoHS : Compliant | 0 | |||
| 2420266-5 | TE Connectivity | Socket HSG 5P Blue HCI 40 Pitch (Alt: 2420266-5) RoHS : Compliant | 0 | |||
| 2420266-5 | TE Connectivity | (Alt: 2420266-5) RoHS : Compliant | 0 | |||
| 2026-60-C3LF | Bourns Inc | (Alt: 2026-60-C3LF) RoHS : Compliant | 0 | |||
| MAL210266682E3 | Vishay Intertechnologies | 6800uF 400V 76x146 85C 10000h (Alt: MAL210266682E3) RoHS : Compliant | 0 | |||
| SMT-40-266-18-P | TE Connectivity | Toroidal Inductor 1618 uH 177 A 2128 Milliohm SMD (Alt: 1879484-2) RoHS : Compliant | 0 | |||
| RCMS02665R0FHA20 | Vishay Intertechnologies | Resistor 665 Ohm 1 125 mW250 mW500 mW Axial Leaded Metal Film High Stability - Tape and Reel (Alt: RCMS02665R0FHA20) RoHS : Compliant | 0 | |||
| RCMS0266501FHS14 | Vishay Intertechnologies | RCMS 02 66K5 1 K3 BA100 e3 (Alt: RCMS0266501FHS14) RoHS : Compliant | 0 | |||
| RCMX0266502FHS14 | Vishay Intertechnologies | Resistor 665 kOhm 1 125 mW Axial Leaded Metal Film High Ohmic (Alt: RCMX0266502FHS14) RoHS : Compliant | 0 | |||
| 801-87-002-66-001101 | PRECI-DIP SSA | Conn Socket Strip Receptacle 2 POS 254mm Press Fit ST Through Hole Bulk (Alt: 801-87-002-66-001101) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0026614030 | Molex | Pin Header, 3 Contacts, 1 Row, 3.96mm, Gold, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0026614030) RoHS : Compliant | 0 | ||
| 0026607030 | Molex | (Alt: 0026607030) RoHS : Compliant | 0 | |||
| 0026624030 | Molex | Pin Header, 3 Contacts, 1 Row, 3.96mm, Tin, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0026624030) RoHS : Compliant | 0 | |||
| TNPW0402665RBEED | Vishay Intertechnologies | (Alt: TNPW0402665RBEED) RoHS : Compliant | 0 | |||
| 0026654020 | Molex | (Alt: 0026654020) RoHS : Compliant | 0 | |||
| 0026605020 | Molex | Pin Header, 2 Contacts, 1 Row, 3.96mm, Matte Tin, 7A, Right Angle, Partially Shrouded, Brass, THT RA (Alt: 0026605020) RoHS : Compliant | 0 | |||
| 0026644070 | Molex | Conn Partial Shrouded Header 7 POS 3.96mm Solder ST Through Hole (Alt: 0026644070) RoHS : Compliant | 0 | |||
| 0026614150 | Molex | (Alt: 0026614150) RoHS : Compliant | 0 | |||
| 0026654030 | Molex | (Alt: 0026654030) RoHS : Compliant | 0 | |||
| 0026604120 | Molex | Pin Header, 12 Contacts, 1 Row, 3.96mm, Matte Tin, 7A, Straight, Partially Shrouded, Brass, THT (Alt: 0026604120) RoHS : Compliant | 0 | |||
| JX310-50266 | Amphenol Corporation | (Alt: JX310-50266) RoHS : Compliant | 0 | |||
| 0026644120 | Molex | Pin Header, 12 Contacts, 1 Row, 3.96mm, Matte Tin, 7A, Straight, Partially Shrouded, Brass, THT, PET (Alt: 0026644120) RoHS : Compliant | 0 | |||
| 0026605040 | Molex | Pin Header, 4 Contacts, 1 Row, 3.96mm, Matte Tin, 7A, Right Angle, Partially Shrouded, Brass, THT RA (Alt: 0026605040) RoHS : Compliant | 0 | |||
| 0026605050 | Molex | Pin Header, 5 Contacts, 1 Row, 3.96mm, Matte Tin, 7A, Right Angle, Partially Shrouded, Brass, THT RA (Alt: 0026605050) RoHS : Compliant | 0 | |||
| 0026604090 | Molex | Conn Wire to Board HDR 9 POS 3.96mm Solder ST Thru-Hole Bag (Alt: 0026604090) RoHS : Compliant | 0 | |||
![]() Avnet Silica | R5F10266GSP#55 | Renesas Electronics Corporation | (Alt: R5F10266GSP#55) RoHS : Compliant | 0 | ||
| R5F10266GSP#35 | Renesas Electronics Corporation | (Alt: R5F10266GSP#35) RoHS : Compliant | 0 | |||
| R5F10266DSP#35 | Renesas Electronics Corporation | (Alt: R5F10266DSP#35) RoHS : Compliant | 0 | |||
| R5F10266ASM#15 | Renesas Electronics Corporation | (Alt: R5F10266ASM#15) RoHS : Compliant | 0 | |||
DSC1121DI1-026.6000![]() | Microchip Technology Inc | MEMS OSCILLATOR HIGH PERF SINGLE CMOS OUTPUT 40C85C 50PPM (Alt: DSC1121DI1-026.6000) RoHS : Compliant | 0 | |||
| DSC1121DI1-026.6000T | Microchip Technology Inc | MEMS OSCILLATOR HIGH PERF SINGLE CMOS OUTPUT 40C85C 50PPM (Alt: DSC1121DI1-026.6000T) RoHS : Compliant | 0 | |||
![]() DB Roberts | 9026-62-SS | RAF Electronic Hardware | 0 | |||
| EF02661 | Avdel | TP124-519 | 0 | |||
| SCDK0266A | Essentra Components | 6.750IN ID 2.00IN LENGTHBLACK | 0 | |||
| 10266 | Essentra Components | 0 | ||||
| 10266 | Heyco | HCBP-05 NATURAL | 0 | |||
| 1440266 | Essentra Components | 0 | ||||
| 100266 | Pop Rivets | TAPK610BS 001 B5K | 0 | |||
| 47-10-266-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 02662-71000 | Avdel | AVDELOK COL 516 FU ST | 0 | |||
| 47-80-266-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 02662-70800 | Avdel | AVDELOK COL 14 FU ST | 0 | |||
| 47-80-266-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 78030-02661 | Avdel | SUPPORT BLOCK O-RING | 0 | |||
| 47-10-266-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-10-266-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
![]() EBV Elektronik | DSC1121DI1-026.6000![]() | Microchip Technology Inc | MEMS OSCILLATOR HIGH PERF SINGLE CMOS OUTPUT 40C85C 50PPM (Alt: DSC1121DI1-026.6000) RoHS : Compliant | 0 | ||
| DSC1121DI1-026.6000T | Microchip Technology Inc | MEMS OSCILLATOR HIGH PERF SINGLE CMOS OUTPUT 40C85C 50PPM (Alt: DSC1121DI1-026.6000T) RoHS : Compliant | 0 | |||
![]() Flip Electronics | R5F10266ASP#35 | Renesas Electronics Corporation | Stock RoHS : Compliant | 908 | ||
![]() Master Electronics | BA2-B0-26-610-12A-D | Carling Technologies | BA2B02661012AD RoHS : Compliant |
| 0 | |
| BA2-B0-26-620-51A-C3 | Carling Technologies | Two-pole hydraulic-magnetic circuit breaker with handle actuator AC long delay 20A current rating and UL/CSA agency approvals. RoHS : Compliant |
| 0 | ||
| BA2-B0-26-625-211-D | Carling Technologies | Two-pole hydraulic-magnetic circuit breaker with handle actuator AC long delay 25A current rating and screw terminals for OEM applications. RoHS : Compliant |
| 0 | ||
| BB2-B0-26-610-12B-C3 | Carling Technologies | BB2B02661012BC3 RoHS : Compliant |
| 0 | ||
| BB2-B0-26-615-112-D | Carling Technologies | Hydraulic-magnetic circuit breaker with handle actuator 2-pole configuration AC long delay 15A current rating and push-on 0.250 tab terminals. RoHS : Compliant |
| 0 | ||
| BB2-B0-26-620-511-C | Carling Technologies | Hydraulic-magnetic circuit breaker with 2-pole configuration handle actuator and 20A current rating for OEM and general-purpose applications. RoHS : Compliant |
| 0 | ||
| BB2-B0-26-650-521-C | Carling Technologies | Circuit Breaker 2Pole 50A RoHS : Compliant |
| 0 | ||
| BB2-B0-26-650-G12-E | Carling Technologies | Hydraulic-magnetic circuit breaker with handle actuator 2-pole configuration AC long delay 50A current rating and UL489 listed certification. RoHS : Compliant |
| 0 | ||
| BB2-D0-26-615-121-D | Carling Technologies | Hydraulic-magnetic circuit breaker with 2-pole configuration AC long time delay 15A current rating and push-on 0.250 tab terminals. RoHS : Compliant |
| 0 | ||
| B51-B0-26-620-C1D-K3 | Carling Technologies | B-Series hydraulic-magnetic circuit breaker with rocker actuator designed for precision overcurrent protection in OEM applications. RoHS : Compliant |
| 0 | ||
| C12-B0-26-610-23A-CJ | Carling Technologies | C12B02661023ACJ RoHS : Compliant |
| 0 | ||
| CB2-B0-26-616-122-C | Carling Technologies | CB2B026616122C RoHS : Compliant |
| 0 | ||
| CB2-B0-26-650-322-E | Carling Technologies | CB2B026650322E RoHS : Compliant |
| 0 | ||
| CF2-B0-26-650-644-D | Carling Technologies | CF2B026650644D RoHS : Compliant |
| 0 | ||
| CD1-B0-26-615-21B-DG | Carling Technologies | CD1B02661521BDG RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C6026-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C6026-60 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C6026-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax. |
| 370 | |
| PE3W00266 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-200 Coax., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00266 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00266 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable using LMR-200 coax. | 330 | |||
| PE3W00266-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 36 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 36 inch length using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00266-36 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00266-36 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 36 inch length using LMR-200 coax. |
| 66 | ||
| PE3M0266-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Male Cable 6 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0266-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0266-6 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0266-6 between-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ pin to SMA male cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0266-6 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 22 | ||
| PE3C10266-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm F Male to 75 Ohm F Male Low Loss Cable 48 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low loss cable 48 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm F male low loss cable 48 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our low loss F type to type F cable assembly has male gender on end 1 and male on end 2. PE3C10266-48 can also be known as a low loss type F plug to F type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10266-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. Type F plug to F type plug cable assembly PE3C10266-48 is built with LMR-600-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to F type cable assembly for quick shipment worldwide. Variations of type F and F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 5 | ||
| PE3C10266-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm F Male to 75 Ohm F Male Low Loss Cable 24 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low loss cable 24 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm F male low loss cable 24 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our low loss type F to F type cable assembly has male gender on end 1 and male on end 2. PE3C10266-24 can also be known as a low loss type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10266-24 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. F type plug to type F plug cable assembly PE3C10266-24 is built with LMR-600-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type F plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of F type and type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 5 | ||
| PE3C10266-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm F Male to 75 Ohm F Male Low Loss Cable 36 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low loss cable 36 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm F male low loss cable 36 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and F type cable connection on the other. Our low loss type F to type F cable assembly has male gender on end 1 and male on end 2. PE3C10266-36 can also be known as a low loss type F plug to F type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10266-36 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. Type F plug to type F plug cable assembly PE3C10266-36 is built with LMR-600-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of F type and type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 5 | ||
| PE3W02662-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to SMA Male Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly N female bulkhead to SMA male cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMA male cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a SMA cable connection on the other. Our a type N to a SMA cable assembly has female gender on end 1 and male on end 2. PE3W02662-36 can also be known as a type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W02662-36 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. Type N jack to SMA plug cable assembly PE3W02662-36 is built with RG316 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02662-36 can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02667/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female to Mini UHF Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female to mini UHF male low loss cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to mini UHF male low loss cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and mini UHF cable connection on the other. Our low loss type N to mini UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W02667/HS-24 can also be known as a low loss type N jack to mini UHF plug cable assembly and will be shipped same-day as it is purchased. N type jack to mini UHF plug cable assembly PE3W02667/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to mini UHF cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 2.5 GHz maximum frequency N type female to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02667/HS-24 can also be used in the other direction and will be mini UHF male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to mini UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to mini UHF male low loss cable 24 inch length using LMR-195 coax with heatshrink. |
| 0 | ||
| PE3W02662-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to SMA Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly N female bulkhead to SMA male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to SMA male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a SMA cable connection on the other. Our a type N to a SMA cable assembly has female gender on end 1 and male on end 2. PE3W02662-24 can also be known as a type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W02662-24 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. Type N jack to SMA plug cable assembly PE3W02662-24 is built with RG316 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W02662-24 can also be used in the other direction and will be SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02667/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female to Mini UHF Male Low Loss Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N female to mini UHF male low loss cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to mini UHF male low loss cable 12 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and mini UHF cable connection on the other. Our low loss type N to mini UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W02667/HS-12 can also be known as a low loss type N jack to mini UHF plug cable assembly and will be shipped same-day as it is purchased. N type jack to mini UHF plug cable assembly PE3W02667/HS-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to mini UHF cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 2.5 GHz maximum frequency type N female to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02667/HS-12 can also be used in the other direction and will be mini UHF male to N type female cable assembly if the opposite connectivity is required. Low loss type N jack to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to mini UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to mini UHF male low loss cable 12 inch length using LMR-195 coax with heatshrink. |
| 0 | ||
| PE3W02663/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-240 Coax with HeatShrink. PE3W02663/HS is a N male to BNC male cable using LMR-240 coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02663/HS N male to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3M0026-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 SMA Male to TNC Male Cable 60 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 SMA male to TNC male cable 60 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to TNC male cable 60 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3028 SMA to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3028 SMA cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/55-3028 SMA to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3028 SMA to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0026-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3028 SMA plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3028 SMA plug to M39012/26-0011 TNC plug cable assembly PE3M0026-60 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/55-3028 SMA cable assembly is manufactured with M39012/55-3028 SMA to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/55-3028 SMA male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0026-60 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/55-3028 SMA male cable assembly if the opposite connectivity is required. M39012/55-3028 SMA plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3028 SMA to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/55-3028 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to TNC male cable 60 inch length using M17/60-RG142 coax. |
| 0 | ||
| PE3W10266/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack Right Angle 2 Hole Flange to SMA Female Bulkhead Cable Using RG142 Coax with HeatShrink. PE3W10266/HS is a BMA jack right angle 2 hole flange to SMA female bulkhead cable using RG142 coax. This Pasternack BMA jack right angle 2 hole flange to SMA female bulkhead cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. BMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack BMA right angle 2 hole flange to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10266/HS BMA jack right angle 2 hole flange to SMA female bulkhead cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W02666 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Jack Bulkhead Cable Using LMR-100 Coax. PE3W02666 is a SMA male right angle to SMB jack bulkhead cable using LMR-100A coax. This Pasternack SMA male right angle to SMB jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02666 SMA male right angle to SMB jack bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 1-2420266-2 | TE Connectivity | Socket HSG 2X6P Blue HCI 4.0 Pitch Number of Positions: 12 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 12 Housing for Female Terminals Wire-to-Board | Part Number: 1-2420266-2 | Internal Number: 1-2420266-2 | TE Connectivity RoHS : Compliant |
| 12,450 | |
| 1-2420266-4 | TE Connectivity | Socket HSG 2X7P Blue HCI 4.0 Pitch Number of Positions: 14 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 14 Housing for Female Terminals Wire-to-Board | Part Number: 1-2420266-4 | Internal Number: 1-2420266-4 | TE Connectivity RoHS : Compliant |
| 12,002 | ||
| 3-2420266-3 | TE Connectivity | Socket HSG 3P Red HCI 4.0 Pitch Number of Positions: 3 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Standard Rectangular Connector | 3 Housing for Female Terminals Crimp | Part Number: 3-2420266-3 | Internal Number: 3-2420266-3 | TE Connectivity RoHS : Compliant |
| 12,000 | ||
| 1-2420266-0 | TE Connectivity | Socket HSG 2X5P Blue HCI 4.0 Pitch Number of Positions: 10 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 10 Housing for Female Terminals Wire-to-Board | Part Number: 1-2420266-0 | Internal Number: 1-2420266-0 | TE Connectivity RoHS : Compliant |
| 12,000 | ||
| 2420266-6 | TE Connectivity | Socket HSG 2X3P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-6 | Internal Number: 2420266-6 | TE Connectivity RoHS : Compliant |
| 11,998 | ||
| 2420266-4 | TE Connectivity | Socket HSG 4P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-4 | Internal Number: 2420266-4 | TE Connectivity RoHS : Compliant |
| 11,980 | ||
| 2420266-3 | TE Connectivity | Socket HSG 3P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-3 | Internal Number: 2420266-3 | TE Connectivity RoHS : Compliant |
| 11,973 | ||
| 2420266-5 | TE Connectivity | Socket HSG 5P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-5 | Internal Number: 2420266-5 | TE Connectivity RoHS : Compliant |
| 11,944 | ||
| 2420266-8 | TE Connectivity | Socket HSG 2X4P Blue HCI 4.0 Pitch Number of Positions: 8 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 8 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-8 | Internal Number: 2420266-8 | TE Connectivity RoHS : Compliant |
| 11,918 | ||
| 2-2420266-2 | TE Connectivity | Socket HSG 2P Yellow HCI 4.0 Pitch Number of Positions: 2 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Standard Rectangular Connector | 2 Housing for Female Terminals Crimp | Part Number: 2-2420266-2 | Internal Number: 2-2420266-2 | TE Connectivity RoHS : Compliant |
| 9,955 | ||
| 2420266-2 | TE Connectivity | Socket HSG 2P Blue HCI 4.0 Pitch Number of Positions: 6 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Connector System: Wire-to-Board Contact Retention Within Housing: With Standard Rectangular Connector | 6 Housing for Female Terminals Wire-to-Board | Part Number: 2420266-2 | Internal Number: 2420266-2 | TE Connectivity RoHS : Compliant |
| 9,835 | ||
| 2-2420266-3 | TE Connectivity | Socket HSG 3P Yellow HCI 4.0 Pitch Number of Positions: 3 Connector & Housing Type: Housing for Female Terminals Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Board Standard Rectangular Connector | 3 Housing for Female Terminals Crimp | Part Number: 2-2420266-3 | Internal Number: 2-2420266-3 | TE Connectivity RoHS : Compliant |
| 9,775 | ||
| 170266-2 | TE Connectivity | POSITIVE LOCK RECEPTACLE ELECTRO TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 12 – 10 AWG Wire Size: 3.31 – 5.26 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 12 – 10 AWG 3.31 – 5.26 mm² | Quick Disconnect | Part Number: 170266-2 | Internal Number: 170266-2 | TE Connectivity RoHS : Compliant |
| 6,923 | ||
![]() Vyrian | BB3-B0-26-620-121-D | Carling Technologies | Magnetic Circuit Breaker, 3 Pole(s), 20A, 277VAC, Panel Mount RoHS : Compliant | 16,866 | ||
| 2026-60-C2LF | Bourns Inc | Surge Protection Circuit RoHS : Compliant | 13,655 | |||
| 2702663 | Phoenix Contact | Power/Signal Relay, DPST, Momentary, 0.045A (Coil), 30VDC (Coil), 1080mW (Coil), 250VDC (Contact), DC Input, Random, AC/DC Output, DIN-Rail Mount RoHS : Compliant | 12,687 | |||
| 2202663 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 11,874 | |||
| BB2-B0-26-625-522-D | Carling Technologies | Magnetic Circuit Breaker, 2 Pole(s), 25A, 250VAC, Panel Mount RoHS : Compliant | 11,176 | |||
| 2202664 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 9,957 | |||
| CF2-B0-26-650-644-D | Carling Technologies | Magnetic Circuit Breaker, 2 Pole(s), 50A, 250VAC, Panel Mount RoHS : Compliant | 8,151 | |||
| LM2738YMYX-J7002667 | Texas Instruments | 7,023 | ||||
| 5962-01-026-6045 | Texas Instruments | OTP ROM, 32X8, 40ns, TTL, PDIP16 RoHS : Not Compliant | 5,823 | |||
| 2302667 | Phoenix Contact | Cable Assembly, 40 Conductor(s), 26AWG, 60V, Communication Cable RoHS : Compliant | 5,402 | |||
| 3026654 | Phoenix Contact | Fuses/Accessories RoHS : Compliant | 5,031 | |||
| LM2738YMY-J7002666 | Texas Instruments | 4,633 | ||||
| 5502667-1 | TE Connectivity | Connector Accessory RoHS : Compliant | 2,891 | |||
| 50PQ32202660K | KEMET Corporation | Film Capacitor, Polyester, 630V, 10% +Tol, 10% -Tol, 0.22uF, Through Hole Mount | 546 | |||
| 2170266 | Lapp Group Pvt | Wire And Cable, 2 Conductor(s), Communication Cable | 462 | |||
![]() Waytek, Inc. | 12010266 | Aptiv PLC | Aptiv 12010266 rosebud clip for 1.00 conduit is a loom-retention clip designed to secure 1.00" conduit to panels or mounting points. Its rosebud-style head supports organized harness routing and stable attachment in vehicle and equipment wiring applications. |
| 0 | |
![]() Win Source Electronics | MPC8314ECVRAGDA400/266MHZ | Freescale Semiconductor |
| 560 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |