070D3JB2 Price, Reseller, Stock

Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMB Jack Bulkhead to SMP Female Right Angle Cable 36 Inch Length Using RG196 Coax with HeatShrink., Radio frequency assembly SSMB jack bulkhead to SMP female right angle cable 36 inch length using RG196 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB jack bulkhead to SMP female right angle cable 36 inch length using RG196 coax with heatshrink, SSMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMB bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SSMB to right angle SMP cable assemblies have a jack gender on end 1 and female on end 2. PE3W07011/HS-36 can also be known as a SSMB female to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SSMB female to SMP jack cable assembly PE3W07011/HS-36 is built with RG196 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SSMB jack bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07011/HS-36 can also be used in the other direction and will be right angle SMP female to SSMB jack bulkhead cable assembly if the opposite connectivity is required. SSMB female bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to SMP cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB jack bulkhead to SMP female right angle cable 36 inch length using RG196 coax with heatshrink.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE3C100070-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 36 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100070-36 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100070-36 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100070-36 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100070-36 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100070-36 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $853.2
5 : $819.07
10 : $784.94
25 : $750.82

PE3W07070

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMC Jack to BNC Male Cable Using RG316-DS Coax. PE3W07070 is a SMC jack to BNC male cable using RG316-DS coax. This Pasternack SMC jack to BNC male cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm BNC for connector 2. Our jack SMC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07070 SMC jack to BNC male cable assembly is constructed with RG316-DS coax.

PE3C6070/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 2.92mm Male to 2.92mm Male Cable Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly 2.92mm male to 2.92mm male cable using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable using PE-SR405FLJ coax with heatshrink, 2.92mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax formable cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our formable 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3C6070/HS can also be known as a formable 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C6070/HS is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Formable 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male cable using PE-SR405FLJ coax with heatshrink.

PE3W07000

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Female Bulkhead to 75 Ohm SMB Plug Right Angle Cable Using 75 Ohm RG179 Coax. PE3W07000 is a BNC female bulkhead to SMB plug right angle cable using RG179 coax. This Pasternack BNC female bulkhead to SMB plug right angle cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm SMB for connector 2. BNC to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC bulkhead to plug SMB right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W07000 BNC female bulkhead to SMB plug right angle cable assembly is constructed with RG179 coax.

PE3W07082

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using RG316-DS Coax. PE3W07082 is a SMA male right angle to SMA male cable using RG316-DS coax. This Pasternack SMA male right angle to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07082 SMA male right angle to SMA male cable assembly is constructed with RG316-DS coax.

PE3W07095LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to TNC Male Right Angle Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W07095LF/HS is a TNC female bulkhead to TNC male right angle cable using LMR-100A coax. This Pasternack TNC female bulkhead to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07095LF/HS TNC female bulkhead to TNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W07097/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Male Right Angle to MMCX Jack Cable Using LMR-100 Coax with HeatShrink. PE3W07097/HS is a N male right angle to MMCX jack cable using LMR-100A coax. This Pasternack N male right angle to MMCX jack cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MMCX for connector 2. N right angle to MMCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to jack MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07097/HS N male right angle to MMCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C0706

Pasternack Enterprises

PE3C10709

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Cable Using RG58 Coax., Pasternack’s PE3C10709 right angle type N male to SMA male RF cable assembly using RG58 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle type N cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10709 can also be known as a right angle type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.96-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10709 RF cable has a pvc (nc) jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our right angle type N male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10709 type N plug to SMA plug cable assembly is built with RG58, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10709 can also be used in the other direction and will be an SMA male to right angle type N male cable assembly if the opposite connectivity is required. This type N right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements.

PE3C0709

Pasternack Enterprises

PE3C9070

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using Tinned RG402 Coax. PE3C9070 is a SMA male right angle to SMA female cable using RG402 Tinned coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9070 SMA male right angle to SMA female cable assembly is constructed with RG402 Tinned coax.

PE3W07003

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMB Plug Cable Using RG400 Coax. PE3W07003 is a N male right angle to SMB plug cable using RG400 coax. This Pasternack N male right angle to SMB plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMB for connector 2. N right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07003 N male right angle to SMB plug cable assembly is constructed with RG400 coax.

PE3W07018LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Mini SMP Female to 2.92mm Female Bulkhead Cable Using PE-SR405AL Coax, LF Solder. PE3W07018LF is a Mini SMP female to 2.92mm female bulkhead cable using PE-SR405AL coax. This Pasternack Mini SMP female to 2.92mm female bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Our female Mini SMP to female 2.92mm bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W07018LF Mini SMP female to 2.92mm female bulkhead cable assembly is constructed with PE-SR405AL coax.

PE3W07027/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to SMA Male Cable Using PE-SR402FLJ Coax with HeatShrink. PE3W07027/HS is a SMA female 4 hole flange to SMA male cable using PE-SR402FLJ coax. This Pasternack SMA female 4 hole flange to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 4 hole flange to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W07027/HS SMA female 4 hole flange to SMA male cable assembly is constructed with PE-SR402FLJ coax.

Relay Specialties

CIF07005-ON

BlockMaster Blocks

PCB Term Blk; 7-pos; 5.08mm Plug; 90°; 15A; 300V; 30-12AWG Stackable; Black

1 : $3.95
10 : $3.9
25 : $3.85
50 : $3.8
100 : $3.75

776

153070

OptiFuse

Automotive Circuit Breaker 70 A; 42 VDC / 48 VDC Type III - Manual Reset

1 : $61.81
10 : $54.94
25 : $49.45
50 : $44.95
100 : $43.0

583

RS30-700

OptiFuse

PTC Fuse; 7.00 A; 30 VDC

1 : $1.84
10 : $1.64
25 : $1.48
50 : $1.34
100 : $1.28

555

151070

OptiFuse

Automotive Circuit Breaker 70 A; 42 VDC / 48 VDC Type I - Auto Reset

1 : $61.81
10 : $54.94
25 : $49.45
50 : $44.95
100 : $43.0

546

153070-SS

OptiFuse

Automotive Circuit Breaker 70 A; 42 VDC / 48 VDC Type III - Manual Reset

1 : $67.43
10 : $59.94
25 : $53.95
50 : $49.04
100 : $46.91

465

353070

OptiFuse

Automotive Circuit Breaker 70 A; 42 VDC / 48 VDC Type III - Manual Reset

1 : $83.17
10 : $73.93
25 : $66.53
50 : $60.48
100 : $57.85

250

CIM070A1

BlockMaster Blocks

TB Header; 7-position; 5.00mm Vertical; THT; 15A; 300V; Open Stackable; PA; Green

1 : $1.26
10 : $1.24
25 : $1.23
50 : $1.21
100 : $1.2

106

EE-SX1070

OMRON Corporation

Optical Photomicro Sensor Transmissive Phototransistor Wide Slot with 8mm
RoHS : Compliant

1 : $2.15
5 : $2.07
10 : $1.93
25 : $1.81
50 : $1.7

AST0250704

METZ CONNECT USA

Spring TB; 7-pos; 5.00mm; PCB 90°; Lever; 13A; 300V Stackable; PA; Gray; 0.2-2 mm²
RoHS : Compliant

1 : $8.27
5 : $7.96
10 : $7.41
25 : $6.94
50 : $6.52

CIM070A5

BlockMaster Blocks

TB Header; 7-position; 5.08mm Vertical; THT; 15A; 300V; Open Stackable; PA; Green

1 : $1.26
10 : $1.24
25 : $1.23
50 : $1.21
100 : $1.2

CIM070A3

BlockMaster Blocks

TB Header; 7-position; 7.50mm Vertical; THT; 15A; 300V; Open Stackable; PA; Green

1 : $1.63
10 : $1.6
25 : $1.58
50 : $1.56
100 : $1.54

CIF07001-ON

BlockMaster Blocks

PCB Term Blk; 7-pos; 5.00mm Plug; 90°; 15A; 300V; 30-12AWG Stackable; Black

1 : $3.95
10 : $3.9
25 : $3.85
50 : $3.8
100 : $3.75

CR151D20703

Eaton Bussmann

TERMINAL STRIP

1 : $1.69
5 : $1.63

EE520-70400

NAMCO

NAMCO NAMCO PROXIMITY SWITCH

1 : $241.48

P0700-21

Littelfuse Inc

SSAC* KNOB (KM1) USE WITH P100

1 : $10.59
5 : $10.25
10 : $9.93
25 : $9.63
50 : $7.94

Teledyne HiRel

M38510/30702BFA

Teledyne HiRel

DECODER, DUAL 2-TO-4-LINE
RoHS : Not Compliant

5962-9160701M2A

Teledyne HiRel

SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH SYNCHRONOUS RESET AND COMMON I/O
RoHS : Not Compliant

5962-9160701MSA

Teledyne HiRel

SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH SYNCHRONOUS RESET AND COMMON I/O
RoHS : Not Compliant

M38510/00701BDA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/30701BEA

Teledyne HiRel

DECODER, 3-TO-8-LINE
RoHS : Not Compliant

M38510/00701BCA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/30701B2A

Teledyne HiRel

DECODER, 3-TO-8-LINE
RoHS : Not Compliant

M38510/00701BBA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/30701BFA

Teledyne HiRel

DECODER, 3-TO-8-LINE
RoHS : Not Compliant

M38510/30702BEA

Teledyne HiRel

DECODER, DUAL 2-TO-4-LINE
RoHS : Not Compliant

M38510/00701BAA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-9160701MRA

Teledyne HiRel

SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH SYNCHRONOUS RESET AND COMMON I/O
RoHS : Not Compliant

CD4070BMJ//883

Teledyne HiRel

QUAD 2-INPUT EXCLUSIVE-OR GATE

M38510/30702B2A

Teledyne HiRel

DECODER, DUAL 2-TO-4-LINE
RoHS : Not Compliant

Venkel Ltd.

HPTF0805-TE-1070FT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�25PPM;107R;�1%
RoHS : Compliant

HPTF1206-UE-1070CT

VENKEL LTD

High Power Thin Film CR;1206;1/3W;�25PPM;107R;�0.25%
RoHS : Compliant

HPTF2010-UC-1070CT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�50PPM;107R;�0.25%
RoHS : Compliant

MEHF0207-VC-1070FT

VENKEL LTD

High Frequency MELF;0207;1/2W;�50PPM;107R�1%
RoHS : Not Compliant

MELFC0102-RZ-1070BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;107R;�0.1%
RoHS : Compliant

MELFC0207-XZ-1070BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�15PPM;107R;�0.1%
RoHS : Compliant

MELFM0204-TE-1070FT

VENKEL LTD

MELF Molded Thin Film CR;0204;1/4W;�25PPM;107R;�1%
RoHS : Not Compliant

MELFM0204-ZE-1070DT

VENKEL LTD

MELF Molded Thin Film CR;0204;2/5W;�25PPM;107R;�0.5%
RoHS : Not Compliant

LCR0402-R070JT

VENKEL LTD

Low Value CR;0402;70m ohm;�5%
RoHS : Compliant

HPTF0603-QP-1070UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;107R;�0.01%
RoHS : Compliant

HPTF1206-TC-1070UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�50PPM;107R;�0.01%
RoHS : Compliant

HPTF1206-TP-1070DT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�5PPM;107R;�0.5%
RoHS : Compliant

HPTF1210-UC-1070AT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;107R;�0.05%
RoHS : Compliant

PWCR2512-ZK-1070FT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;107R;�1%
RoHS : Compliant

CR0603-10W-1070DT

VENKEL LTD

Chip Resistor;0603;1/10W;107R;�0.5%
RoHS : Compliant

070D3JB2 Reseller

Enlace URL