102-03SC-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum BNC Male to N Male Low Loss Cable 24 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to N male low loss cable 24 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to N male low loss cable 24 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss a BNC to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10271-24 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10271-24 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to type N plug cable assembly PE3C10271-24 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10271-24 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $94.99
10 : $93.09
25 : $91.19
100 : $89.29

PE3W00010-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to N Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to N male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a type N cable connection on the other. Our a SMA to a type N cable assembly has male gender on end 1 and male on end 2. PE3W00010-24 can also be known as a SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W00010-24 RF cable has a FEP jacket of 0.098-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. SMA plug to type N plug cable assembly PE3W00010-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00010-24 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements.

1 : $91.99
25 : $87.39
50 : $82.79
100 : $79.11

PE3C10266-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: F, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-75-DB, RF Cable Type: LMR-600-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm F Male to 75 Ohm F Male Low Loss Cable 48 Inch Length Using 75 Ohm LMR-600-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm F male to 75 Ohm F male low loss cable 48 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm F male to 75 Ohm F male low loss cable 48 inch length using 75 Ohm LMR-600-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our low loss F type to type F cable assembly has male gender on end 1 and male on end 2. PE3C10266-48 can also be known as a low loss type F plug to F type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad aluminum as cable inner conducting material and PTFE dielectric type. Our PE3C10266-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. Type F plug to F type plug cable assembly PE3C10266-48 is built with LMR-600-75-DB which is a coax type. The Pasternack F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to F type cable assembly for quick shipment worldwide. Variations of type F and F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal F to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $109.99
10 : $107.79
25 : $105.59
100 : $103.39

PE3C10201

Pasternack Enterprises

PE3C10235-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female to TNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly N female to TNC male low loss cable 60 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to TNC male low loss cable 60 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C10235-60 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10235-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our type N female to TNC male cable has a maximum VSWR of 1.4:1. Type N jack to TNC plug cable assembly PE3C10235-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10235-60 can also be used in the other direction and will be a TNC male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $65.99
25 : $62.69
50 : $59.39
100 : $56.75

PE3C10249/HS

Pasternack Enterprises

PE3C10254-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to Reverse Polarity TNC Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100A-UF Coax., Radio frequency assembly SMA male right angle to reverse polarity TNC plug right angle low loss cable 100 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to reverse polarity TNC plug right angle low loss cable 100 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle reverse polarity TNC cable connection on the other. Our low loss right angle SMA to right angle reverse polarity TNC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10254-100CM can also be known as a low loss right angle SMA plug to right angle reverse polarity TNC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10254-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to reverse polarity TNC male cable assembly PE3C10254-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10254-100CM can also be used in the other direction and will be a right angle reverse polarity TNC plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC reverse polarity right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C10263LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm N Male Cable Using 75 Ohm LMR-240-75-DB with HeatShrink, LF Solder. PE3C10263LF/HS is a F male to N male cable using LMR-240-75-DB coax. This Pasternack F male to N male cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm N for connector 2. Our male F to male N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3C10263LF/HS F male to N male cable assembly is constructed with LMR-240-75-DB coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C10280-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Plenum BNC Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 60 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 60 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10280-60 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10280-60 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10280-60 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $75.99
10 : $74.47
25 : $72.95
100 : $71.43

PE3C10283

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm. Plenum N Male to SMA Male Low Loss Cable Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to SMA male low loss cable using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to SMA male low loss cable using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10283 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10283 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10283 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3C10287-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum TNC Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum TNC male to TNC male low loss cable 36 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum TNC male to TNC male low loss cable 36 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10287-36 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10287-36 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $71.99
10 : $70.55
25 : $69.11
100 : $67.67

PE3C10295-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to Straight Cut Lead Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to straight cut lead low loss cable 200 cm length using LMR-100A-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to straight cut lead low loss cable 200 cm length using LMR-100A-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C10295-200CM can also be known as a low loss SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10295-200CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to straight cut lead sexless cable assembly PE3C10295-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10295-200CM can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $36.99
25 : $35.14
50 : $33.29
100 : $31.81

PE3C1029LF

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Right Angle Bulkhead Cable Using LMR-200 Coax, LF Solder. PE3C1029LF is a TNC male to TNC female right angle bulkhead cable using LMR-200 coax. This Pasternack TNC male to TNC female right angle bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC to female TNC right anglebulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1029LF TNC male to TNC female right angle bulkhead cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C9310-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C9310-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9310-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C9310-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C9310-24 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $97.99
25 : $93.09
50 : $88.19
100 : $84.27

PE3CA1024-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-113mm, RF Cable Type: 1.13mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to UMCX 2.5 Plug Cable 12 Inch Length Using 1.13mm Coax, RoHS., Radio frequency assembly SMA male to UMCX 2.5 plug cable 12 inch length using 1.13mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX 2.5 plug cable 12 inch length using 1.13mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a male to plug coax assembly, PE3CA1024-12, can also be known as a SMA plug to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX 2.5 male cable assembly PE3CA1024-12 is built with 1.13mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1024-12 can also be used in the other direction and will be UMCX 2.5 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX 2.5 plug cable 12 inch length using 1.13mm coax, RoHS.

1 : $30.39
25 : $28.87
50 : $27.35
100 : $26.14

TE Connectivity

RN102-1-02-3M0

TE Connectivity

RN102-1-02-3M0 Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1 A PCB Terminal PD2 | Part Number: RN102-1-02-3M0 | Internal Number: 816487-SF | TE Connectivity
RoHS : Compliant

25 : $3.24
10 : $3.49
1 : $3.74

14,248

2118710-2

TE Connectivity

1 PC STD SHIELD, CRS-38.10X25.40X6.00MM Frame Material: Cold Rolled Steel Shielding Type: One-Piece Cold Rolled Steel One-Piece | Board Level Shielding (Bls) | Part Number: 2118710-2 | Internal Number: 2118710-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.89
500 : $0.91
250 : $0.94
100 : $0.97
50 : $1.0
1 : $1.1

11,208

102387-6

TE Connectivity

26 MODIV HSG COMP DR .100 POL Number of Positions: 26 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: Without Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 26 Receptacle Housing Without | Part Number: 102387-6 | Internal Number: 102387-6 | Alias Number: 010-1079-00 | TE Connectivity
RoHS : Compliant

1,000 : $4.15
500 : $4.27
250 : $4.4
100 : $4.52
50 : $4.65
25 : $4.77
10 : $4.9
1 : $5.03

3,998

1028-021-0205

TE Connectivity

BKSHL, 2P, BLK, REC, ST, NW 7.5/8.5 Number of Positions: 2 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Primary Product Material: PA 6 Cable Exit Angle: 180 ° Backshell & Deutsch Dtm | 2 Black Backshell PA 6 | Part Number: 1028-021-0205 | Internal Number: 1028-021-0205 | TE Connectivity
RoHS : Compliant

1 : $1.36

2,972

2102060-2

TE Connectivity

Mezalok, Pin, 114 p, 50 Au, LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 114 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 2102060-2 | Internal Number: 2102060-2 | TE Connectivity
RoHS : Compliant

1 : $55.14

2,177

2-746610-2

TE Connectivity

014 DIP PLUG 100CL TIN Connector System: Wire-to-Board Number of Positions: 14 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 14 2.54 mm .1" | Ribbon Cable Connector | Part Number: 2-746610-2 | Internal Number: 2-746610-2 | TE Connectivity
RoHS : Compliant

1,000 : $2.35
500 : $2.42
250 : $2.5
100 : $2.58
50 : $2.65
1 : $2.91

202

RN122-1-02-10M

TE Connectivity

RN122-1-02-10M Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC 1 A PCB Terminal PD2 | Part Number: RN122-1-02-10M | Internal Number: 816513-SF | TE Connectivity
RoHS : Compliant

10 : $4.72
1 : $5.23

157

1761028-4

TE Connectivity

68 50SR R/A RCPT ASSY,LEAD FREE Number of Positions: 68 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Centerline (Pitch): 1.27 mm D-Shaped Connector | 68 Receptacle Cable-to-Board Board Mount | Part Number: 1761028-4 | Internal Number: 1761028-4 | 1.27 mm | TE Connectivity
RoHS : Compliant

1,000 : $9.53
500 : $9.8
250 : $10.1
100 : $10.44
50 : $10.75
1 : $11.79

103

1-5102159-0

TE Connectivity

A/L UNIV HDR 50P RA Connector System: Wire-to-Board Number of Positions: 50 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 50 2.54 mm .1" | Ribbon Cable Connector | Part Number: 1-5102159-0 | Internal Number: 1-5102159-0 | TE Connectivity
RoHS : Compliant

1,000 : $4.21
500 : $4.33
250 : $4.47
100 : $4.62
50 : $4.75
1 : $5.21

T1310240132-000

TE Connectivity

H24B-TS-RO-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Hood Side Locking | Rectangular Connector Hoods & Base | Part Number: T1310240132-000 | Internal Number: T1310240132-000 | TE Connectivity
RoHS : Compliant

25 : $24.01
10 : $25.85
1 : $27.7

ASTA070NN00410235000

TE Connectivity

623 PLUG Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 9 Circular Connector Shell Size: 23 Sealable: No Cable-to-Cable Circular Connector Plug 9 23 | Standard Circular Connector | Part Number: ASTA070NN00410235000 | Internal Number: ASA070N00410235000 | TE Connectivity
RoHS : Compliant

25 : $29.41
10 : $31.67
1 : $33.92

T2111027101-000

TE Connectivity

HMN-Q1-M Contact Type: Pin Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 2 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Pin Insert for Contacts 2 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027101-000 | Internal Number: T2111027101-000 | TE Connectivity
RoHS : Compliant

50 : $14.05
25 : $14.88
10 : $15.71
1 : $16.54

2102351-1

TE Connectivity

CeeLok FAS-T, Receptacle Kit, PCB, Ni Connector System: Wire-to-Board Circular Connector Type: Circular Connector Receptacle Number of Positions: 8 Circular Connector Shell Size: 8 Shell Plating Material: Electroless Nickel Wire-to-Board Circular Connector Receptacle 8 | Standard Circular Connector | Part Number: 2102351-1 | Internal Number: 2102351-1 | Electroless Nickel | TE Connectivity
RoHS : Compliant

1 : $185.44

2102737-1

TE Connectivity

BP, Right End, MULTIGIG RT 2R Number of Positions: 144 Row-to-Row Spacing: 1.8 mm Row-to-Row Spacing: .071 in Mating Alignment: With Number of Rows: 9 High Speed Backplane Connector | 144 1.8 mm .071" With | Part Number: 2102737-1 | Internal Number: 2102737-1 | TE Connectivity
RoHS : Compliant

1 : $50.29

11021203-01

TE Connectivity

ESAP-ESA PROBE 2K7D411 400601410 Eng Mod NTC Probe Type: Space Qualified NTC Thermistors Electrical Connection: 2 Pin Resistance (at 25°C): 2 kΩ β-Value(25/85): 3499 K Tolerance Resistance: ± 1.57 @ 0 °C % Space Qualified NTC Thermistors 2 Pin | Satellite (Esa) Surface Mount Ntc Sensor | Part Number: 11021203-01 | Internal Number: 11021203-01 | TE Connectivity
RoHS : Compliant

1 : $302.18

Teledyne HiRel

M38510/20902BXA

Teledyne HiRel

PROM, 2K X 4, WITH 3-STATE OUTPUTS, 125 NS ACCESS TIME
RoHS : Not Compliant

M38510/21002BLA

Teledyne HiRel

PROM, 2K X 8, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8984102LA

Teledyne HiRel

PROG. LOGIC DEVICE, ELECTR. ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 20 NS
RoHS : Not Compliant

M38510/34102BEA

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

5962-8766102YC

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME

M38510/20602BYA

Teledyne HiRel

PROM, POWER-SWITCHED, 1K X 4, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/30102BCA

Teledyne HiRel

DUAL POSITIVE-EDGE-TRIGGERED D FLIP-FLOPS WITH PRESET, CLEAR AND COMPLEMENTARY OUTPUTS

M38510/28904BVA

Teledyne HiRel

STATIC RAM, 1K X 4, 55 NS ACCESS TIME
RoHS : Not Compliant

M38510/10102BIA

Teledyne HiRel

OP AMP, GENERAL PURPOSE, DUAL
RoHS : Not Compliant

5962-8766102YA

Teledyne HiRel

PROM, UV ERASABLE, 16K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-8984102KA

Teledyne HiRel

PROG. LOGIC DEVICE, ELECTR. ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 20 NS
RoHS : Not Compliant

M38510/34102B2A

Teledyne HiRel

FLIP-FLOP, JK, DUAL
RoHS : Not Compliant

8300102QA

Teledyne HiRel

COUNTER/TIMER AND PARALLEL I/O PERIPHERAL UNIT

8510205YA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

M38510/21002BKA

Teledyne HiRel

PROM, 2K X 8, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

MELFC0102-RC-1021FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�50PPM;1.02K;�1%
RoHS : Compliant

MELFC0102-RC-1102FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�50PPM;11K;�1%
RoHS : Compliant

MELFC0102-RK-9102FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�100PPM;91K;�1%
RoHS : Compliant

MELFC0102-RZ-1021CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;1.02K;�0.25%
RoHS : Compliant

MELFC0102-RZ-1102CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�15PPM;11K;�0.25%
RoHS : Compliant

MELFC0102-UK-2102FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�100PPM;21K;�1%
RoHS : Compliant

MELFC0102-YK-1022FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�100PPM;10.2K;�1%
RoHS : Compliant

CR2010-2W-9102FT

VENKEL LTD

Chip Resistor;2010;1/2W;91K;�1%
RoHS : Compliant

C1812C0G102-102JNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;1000V;1000pF;�5%
RoHS : Compliant

MELFC0102-RE-1022CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�25PPM;10.2K;�0.25%
RoHS : Compliant

MELFC0102-UE-1022FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�25PPM;10.2K;�1%
RoHS : Compliant

MELFC0102-UE-5102CT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�25PPM;51K;�0.25%
RoHS : Compliant

MELFC0102-UZ-5102DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;51K;�0.5%
RoHS : Compliant

MELFC0102-YK-2102FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�100PPM;21K;�1%
RoHS : Compliant

MELFC0102-YZ-1021FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�15PPM;1.02K;�1%
RoHS : Compliant

Waytek, Inc.

19057-0102

Molex

16-14 GA # 10 Ring Terminal Blue Nylon Brass Extra Sleeve

50 : $0.209
200 : $0.198
500 : $0.1842
1,000 : $0.1769

86,422

T30XL0C2 111-02901

HellermannTyton

HellermannTyton T30XL0C22 standard cable tie is a self-locking nylon tie with a 14.3" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.2361
200 : $0.2187
500 : $0.1984
1,000 : $0.1838
5,000 : $0.1747

13,900

T18L9M4 111-02026

HellermannTyton

HellermannTyton T18L9M44 standard cable tie is a self-locking nylon tie with a 8" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.0467
5,000 : $0.0438

13,000

643241029

Molex

CP Terminal 2.8 Sn-2 to 3sqmm Loose disc way, no repl

20 : $0.3157
200 : $0.2986
500 : $0.278
1,000 : $0.2677

12,351

10250

Hillsdale Terminal & Tool Inc

Uninsulated Ring Terminal 12-10 Gauge, 5/16" Stud

50 : $0.156
200 : $0.1416
500 : $0.1265
1,000 : $0.1147
5,000 : $0.1094

5,966

7114-4151-02

Yazaki Corp

18-16 GA Yazaki 2.8 Male Terminal Loose

20 : $0.1887
10 : $0.1717
50 : $0.1567
100 : $0.15
200 : $0.1453
500 : $0.1387

5,449

02981028HXFC

Littelfuse Inc

Flex-Mega Fuse Holder 500A 32V -40C To 125C 46038
RoHS : Compliant

1 : $19.44
10 : $15.22
20 : $14.94
50 : $14.79
100 : $13.36
200 : $13.36

4,118

19221-0230

Molex

4GA Tinned Eyelet 1/4" Stud
RoHS : Compliant

20 : $0.861
50 : $0.7682
100 : $0.6987
200 : $0.6726
500 : $0.6523
1,000 : $0.6262

4,025

7114-4151-02

Yazaki Corp

18-16 GA Yazaki 2.8 Male Terminal Reel

4,000 : $0.1164
20,000 : $0.1065

4,000

0891025.U

Littelfuse Inc

25 Amp Low Profile Mini Fuse Clear Automotive Mini Fuse
RoHS : Compliant

10 : $0.4444
50 : $0.396
100 : $0.3597
200 : $0.3476
500 : $0.3355
1,000 : $0.3223

3,784

19221-0241

Molex

1/0 GA Tinned Eyelet 3/8" Stud
RoHS : Compliant

10 : $1.4904
50 : $1.3294
100 : $1.2048
200 : $1.1632
500 : $1.1269
1,000 : $1.0853

3,520

19221-0245

Molex

2/0 GA Tinned Eyelet 1/2" Stud
RoHS : Compliant

5 : $1.6348
10 : $1.5288
50 : $1.4587
100 : $1.3266
200 : $1.277
500 : $1.2385

1,580

192210239

Molex

1GA Tinned Eyelet 1/2" Stud
RoHS : Compliant

10 : $2.0918
50 : $1.9495
100 : $1.7822
200 : $1.6734
500 : $1.5814
1,000 : $1.5228

1,130

AT11-027-0405

Amphenol Sine Systems

Amphenol Sine Systems AT11-027-0405 contact removal tool is a black terminal removal tool for size 4, 4 Ga. contacts. Comparable to 0411-027-0405, it is compatible with Amphenol AHDP/AHDM and Deutsch HDP/HDM connector families.

5 : $1.6476
10 : $1.5177

264

643241029

Molex

CP Terminal 2.8 Sn-2 to 3sqmm Reel 2500/Reel

2,500 : $0.1933
12,500 : $0.1857

Win Source Electronics

LS Q976-NR-1-0-20-R18

ams

LED RED DIFFUSED 0603 SMD

4,825 : $0.0622
3,610 : $0.0693
2,790 : $0.0717
2,025 : $0.0741
1,310 : $0.0765
540 : $0.0932

278,820

MPZ2012S102AT000

TDK Corporation

FERRITE BEAD 1 KOHM 0805 1LN
RoHS : Compliant

18,520 : $0.0162
13,815 : $0.0181
10,700 : $0.0187
7,775 : $0.0193
5,030 : $0.0199
2,060 : $0.0243

263,500

CC0603KRX7R9BB102

YAGEO Corporation

CAP CER 1000PF 50V X7R 0603
RoHS : Compliant

40,000 : $0.0075
32,055 : $0.0078
24,695 : $0.0081
17,245 : $0.0087
11,115 : $0.009
5,210 : $0.0096

200,292

51021-0200

Molex

PICOBLADE1.25 REC HSG 2P
RoHS : Compliant

30,930 : $0.0097
23,150 : $0.0108
18,020 : $0.0111
13,045 : $0.0115
8,405 : $0.0119
3,450 : $0.0145

148,366

1206B102K102NT

Novacap

CAP CER 1000PF 1KV X7R 1206
RoHS : Compliant

17,650 : $0.017
13,160 : $0.019
10,205 : $0.0196
7,390 : $0.0203
4,785 : $0.0209
1,965 : $0.0255

80,000

E-102

Semitec USA Corp

DIODE CUR REG 100V 1.3MA 300MW

1,290 : $0.2608
965 : $0.291
745 : $0.3009
545 : $0.311
350 : $0.321
145 : $0.3912

80,000

BLM18AG102SH1D

Murata Manufacturing Co Ltd

FERRITE BEAD 1 KOHM 0603 1LN
RoHS : Compliant

16,305 : $0.0184
12,200 : $0.0205
9,435 : $0.0212
6,850 : $0.0219
4,425 : $0.0226
1,815 : $0.0276

74,986

NTHD4102PT1G

onsemi

Trans MOSFET P-CH 20V 2.9A 8-Pin Chip FET T/R / MOSFET 2P-CH 20V 2.9A CHIPFET
RoHS : Compliant

315 : $0.9581
235 : $1.0687
185 : $1.1055
135 : $1.1424
85 : $1.1792
35 : $1.4371

51,000

PI3USB102EZLE+DMX

Diodes Incorporated

IC USB 2.0 SWITCH 10TQFN / USB Switch IC 1 Channel 10-TQFN (1.3x1.6)

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

32,690

3314J-1-102E/3314J1102E

Bourns Inc

925 : $0.3651
690 : $0.4072
535 : $0.4213
390 : $0.4353
250 : $0.4493
105 : $0.5477

27,000

C1206C102KGRACAUTO

KEMET Corporation

Ceramic, AUTO-(CxxxxC-AUTO), 1000 pF, 10%, 2,000 V, 1206, X7R, SMD, MLCC, High Voltage, Temperature Stable, Automotive Grade
RoHS : Compliant

5,155 : $0.0652
3,850 : $0.0728
2,980 : $0.0753
2,165 : $0.0777
1,395 : $0.0803
575 : $0.0978

18,000

FDMC86102LZ

Fairchild Semiconductor Corporation

MOSFET N-CH 100V 7A 8MLP
RoHS : Compliant

310 : $1.0866
235 : $1.212
180 : $1.2537
130 : $1.2955
85 : $1.3374
35 : $1.6298

13,269

BU21024FV-ME2

ROHM Semiconductor

IC SCREEN CNTRL 8BIT 28SSOPB
RoHS : Compliant

50 : $6.0638
37 : $6.7634
29 : $6.9967
21 : $7.2299
14 : $7.4631
6 : $9.0956

5,000

MT53D1024M32D4DT-053 AAT:D

Micron Technology Inc

IC DRAM 32GBIT 1866MHZ 200VFBGA

3 : $142.3158
2 : $158.7369
1 : $164.2106

1,850

AT27C1024-45PU

Microchip Technology Inc

IC EPROM 1M PARALLEL 40DIP
RoHS : Compliant

42 : $9.3437
32 : $10.4213
24 : $10.7809
18 : $11.1405
12 : $11.4988
5 : $14.0149

500

Wuhan P&S

ISL15102AIRZ-T13

Intersil Corporation

1 : $1.91
100 : $1.59
500 : $1.41
1,000 : $1.37

15,295,500

FDP023N08B-F102

onsemi

75V, 242A, 2.35m��, N-Channel Power?MOSFET

1 : $4.72
100 : $3.01
500 : $2.49
1,000 : $2.29

53,000

TSAL6102

Vishay Intertechnologies

IR EMITTER HIGH POWR 940NM 5MM 10DEG-E3
RoHS : Compliant

1 : $0.59
100 : $0.2
500 : $0.19
1,000 : $0.18

50,000

CRCW12102K21FKEA

Vishay Intertechnologies

Standard Thick Film Chip Resistors
RoHS : Compliant

1 : $0.38
100 : $0.13
500 : $0.12
1,000 : $0.12

50,000

MMU0102AC5009GB300

Vishay Intertechnologies

High Frequency Thin Film MELF Resistors,50�� 2%
RoHS : Compliant

1 : $1.35
100 : $0.45
500 : $0.42
1,000 : $0.41

48,000

NTHD4102PT1G

onsemi

Power MOSFET 20 V, Dual P-Channel
RoHS : Compliant

1 : $1.04
100 : $0.67
500 : $0.55
1,000 : $0.51

27,000

VJ0402Y102KCAAC

Vishay Intertechnologies

Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications
RoHS : Compliant

1 : $0.42
100 : $0.14
500 : $0.13
1,000 : $0.13

15,000

WYO102MCMBRAKR

Vishay Intertechnologies

WYO X440Y250VAC 1000PF ��20% Y5U REEL E3
RoHS : Compliant

1 : $1.67
100 : $0.56
500 : $0.52
1,000 : $0.5

9,000

BAV102-GS08

Vishay Intertechnologies

Standard diode 150 V 250mA
RoHS : Compliant

1 : $0.3
100 : $0.1
500 : $0.1
1,000 : $0.09

7,500

NB7NPQ1102MMTTWG

onsemi

3.3 V USB 3.1 GEN-2 10 GB
RoHS : Compliant

1 : $2.62
100 : $1.67
500 : $1.38
1,000 : $1.27

6,000

FDD86102

onsemi

100V��36A��24m�� N-Channel Power MOSFET
RoHS : Compliant

1 : $1.96
100 : $1.25
500 : $1.04
1,000 : $0.95

5,000

TEMD1020

Vishay Intertechnologies

Silicon PIN Photodiode, RoHS-Compliant
RoHS : Compliant

1 : $1.04
100 : $0.38
500 : $0.27
1,000 : $0.25

4,000

CAT1025WI-30-GT3

onsemi

Supervisory Circuits with I2C Serial 2k-bit CMOS EEPROM and Manual Reset
RoHS : Compliant

1 : $1.2
100 : $0.97
500 : $0.89
1,000 : $0.84

3,000

FDP075N15A-F102

onsemi

N-CH PowerTrench MOSFET 150V,130A,7.5m��
RoHS : Compliant

1 : $4.59
100 : $2.93
500 : $2.42
1,000 : $2.23

1,600

TIP102G

onsemi

Plastic Medium Power Complementary Silicon Transistors
RoHS : Compliant

1 : $1.57
100 : $1.01
500 : $0.83
1,000 : $0.76

1,150

102-03SC-R Reseller

Enlace URL