| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
1045S-C33-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() STMicroelectronics | STPS1045DEE-TR | STMicroelectronics | 45 V, 10 A PowerFLAT Power Schottky Rectifier RoHS : Compliant |
| 8,439 | |
| STPS1045B-TR | STMicroelectronics | Power Schottky Rectifier RoHS : Compliant |
| 6,555 | ||
STPS1045BY-TR![]() | STMicroelectronics | Automotive 45 V, 10 A DPAK Power Schottky Rectifier RoHS : Compliant |
| 4,320 | ||
| STPS1045SF | STMicroelectronics | 45V, 10 A PSMC Power Schottky Rectifier RoHS : Compliant |
| 2,286 | ||
STPS1045D![]() | STMicroelectronics | Power Schottky Rectifier RoHS : Compliant |
| 2,106 | ||
| STPS1045B | STMicroelectronics | Power Schottky Rectifier RoHS : Compliant |
| 1,666 | ||
| STPS1045SFY | STMicroelectronics | Automotive 45 V, 10 A PSMC Power Schottky Rectifier RoHS : Compliant |
| 39 | ||
![]() Microchip Technology Inc | AT27C010-45JU-T | Microchip Technology Inc | 45NS, PLCC, IND TEMP, GREEN, PLCC, Projected EOL: 2045-12-30 RoHS : Compliant |
| 540 | |
AT27C010-45JU![]() | Microchip Technology Inc | 45NS, PLCC, IND TEMP, GREEN, PLCC, Projected EOL: 2040-11-01 RoHS : Compliant |
| 63 | ||
| GC4210-450A | Microchip Technology Inc | Si PIN Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| GC15010-450A | Microchip Technology Inc | Si TVAR Non Hermetic EPSM SMT, Projected EOL: - Contact for Pricing RoHS : Compliant | 0 | |||
| 5962-2221045QZC | Microchip Technology Inc | RTPF500ZTL-LG1509E, Projected EOL: 2051-06-23 - Contact for Pricing | 0 | |||
| DSC1001DI1-045.1584 | Microchip Technology Inc | MEMS OSC, LVCMOS, 45.1584MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2045-11-08 RoHS : Compliant |
| 0 | ||
| DSC1001DI1-045.5840 | Microchip Technology Inc | MEMS OSC, LVCMOS, 45.584MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2045-11-08 RoHS : Compliant |
| 0 | ||
| DSC1001DI1-045.1584T | Microchip Technology Inc | MEMS OSC, LVCMOS, 45.1584MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2045-11-08 RoHS : Compliant |
| 0 | ||
| DSC1001DI1-045.5840T | Microchip Technology Inc | MEMS OSC, LVCMOS, 45.584MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2045-11-08 RoHS : Compliant |
| 0 | ||
| VC-840-1045-68M0000000 | Microchip Technology Inc | VC-840-1045-68M0000000, VDFN, Projected EOL: 2051-08-29 RoHS : Compliant |
| 0 | ||
| VC-801A-1045-1M00000000 | Microchip Technology Inc | CMOS Crystal Oscillator, 5.0x3.2mm, 3.3V, -55C to +85C, 40ppm, 1MHz, LDFN, Projected EOL: 2051-06-10 RoHS : Compliant |
| 0 | ||
| VC-840-1045-68M0000000TR | Microchip Technology Inc | VC-840-1045-68M0000000TR, VDFN, Projected EOL: 2051-08-29 RoHS : Compliant |
| 0 | ||
| VC-801A-1045-1M00000000TR | Microchip Technology Inc | CMOS Crystal Oscillator, 5.0x3.2mm, 3.3V, -55C to +85C, 40ppm, 1MHz, LDFN, Projected EOL: 2051-06-10 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 1045 | Keystone Electronics Corp | RoHS : Compliant | 7,597 | ||
| MS51045-52 | Cam-Tech Industries Incorporated | 1,587 | ||||
| 13RS081045 | Micro Plastics Inc | 725 | ||||
| 1045 | Zierick Manufacturing Corporation | 684 | ||||
| MS51045-19 | Cam-Tech Industries Incorporated | 400 | ||||
| 10-457-6-01 | Staffall | 199 | ||||
| A55485/01-045D | Micro Dimensional Products Inc | 139 | ||||
| 104505-7 | TE Connectivity | RoHS : Not Compliant | 44 | |||
| 10-497641-045 | MISC. INDUSTRIAL CONNECTORS | 22 | ||||
| M16X10MMX50MM KEY 1045 ST | MISC. INDUSTRIAL HRD | 22 | ||||
| MS21045L04 | SPS Technologies | 15 | ||||
| MS21045L06 | MS Nuts | 6 | ||||
| 1045-187-SS-20 | RAF Electronic Hardware | 3 | ||||
| 1104-53-0119 | Staffall | 2 | ||||
| 10-455-2-01 | Staffall | 2 | ||||
![]() Sager | 1045 | Keystone Electronics Corp | Test Plugs & Test Jacks PC Loop Test pnt .640x.105 RoHS : Compliant |
| 0 | |
| 1045 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding RESERVED FOR SAN MARCOS | 0 | |||
| 1045370-1 | TE Connectivity | RF Connectors / Coaxial Connectors SSMA ST CBL-PLG F/H SDR RoHS : Compliant | 0 | |||
| 1045488-1 | TE Connectivity | RF Connectors / Coaxial Connectors 1031 7188 00 OSSM CABLE PLUG RoHS : Compliant | 0 | |||
| 1045925 | Phoenix Contact | DIN Rail Terminal Blocks PTFIX2X15BU RoHS : Compliant |
| 0 | ||
| 1053104514 | Molex | Headers & Wire Housings NANOFIT HDR VT DLR KNK 14CKT TIN NAT T&R RoHS : Compliant |
| 0 | ||
| 1-104503-4 | TE Connectivity | Headers & Wire Housings RCPT 15P .100 UNLD RoHS : Compliant | 0 | |||
| 5-104505-4 | TE Connectivity | Headers & Wire Housings PIN 26-22 PHBZ/AU Reel of 12500 RoHS : Compliant |
| 0 | ||
| 5-104550-4 | TE Connectivity | Board to Board & Mezzanine Connectors 30 POS SMT RECPT VERT DUAL ROW RoHS : Compliant |
| 0 | ||
| 523-93-084-11-045003 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD WIRE WRAP PGA SOCKET | 0 | |||
| AS2-B0-10-450-5D1-C | Carling Technologies | Rocker Switches AS2B0104505D1C RoHS : Compliant | 0 | |||
| 0541045096 | Molex | FFC & FPC Connectors .5MM EASY-ON 50P RA SMT SN RoHS : Compliant |
| 0 | ||
| 074011045 | Hubbell Incorporated | 90 MALE, DCG, 1.0-1.1, 1.50 W/MESH |
| 0 | ||
| RCV-00010455 | Carling Technologies | Rocker Switches VVA9S90-100 | 0 | |||
| RF178-01BJ1-01SB1-0450 | Samtec Inc | RF Cable Assemblies RoHS : Compliant | 0 | |||
![]() TME | 2842104-5 | TE Connectivity | Connector: pin strips; male; data; AMPMODU; Inom: 2A; 125V; PIN: 5 RoHS : Compliant |
| 6,300 | |
1045580000![]() | Weidmüller Interface GmbH & Co. KG | Label; polyamide 66; yellow; slide; UL94V-2; W: 6mm; H: 30mm RoHS : Compliant |
| 240 | ||
| 10-454991-223 | Amphenol Corporation | Enclosure for connectors: D-Sub |
| 30 | ||
| 132043-1045 | ITT Interconnect Solutions | Connector: circular; PIN: 9; industrial; PL; straight; IP50 |
| 30 | ||
| 351-0453-000 | ITT Interconnect Solutions | 351-0453-000 |
| 17 | ||
| 104-5710-02-103 | Dialight | Indicator: control lamp |
| 7 | ||
| 5SY4104-5 | Siemens | Circuit breaker; 230/400VAC; Inom: 4A; Poles: 1; Charact: A; 10kA RoHS : Compliant |
| 4 | ||
| 01045170 | GSR | Tap: metric; M5; right hand thread; 0.8; L: 70mm; 4.9mm |
| 0 | ||
| 01045210 | GSR | Tap: metric; M8; right hand thread; 1.25; L: 90mm; 6.2mm |
| 0 | ||
| 031-71045-1010 | Amphenol RF | Connector: BNC; socket; female; coaxial; straight; 75Ω; THT; nickel |
| 0 | ||
| 104-1-045-0-T-LS0-1105 | MPE-Garry GmbH | Connector: pin strips; data; PIN: 45; THT; 3A; vertical; 2.54mm RoHS : Compliant |
| 0 | ||
| 1045620000 | Weidmüller Interface GmbH & Co. KG | Label; polyamide; white; UL94V-2; -40÷100°C; Label l: 40mm RoHS : Compliant |
| 0 | ||
| 47241045 | Stahlwille Tools | Screwdriver: standard; slot; 3.5x0.6mm; DRALL; Blade length: 25mm |
| 0 | ||
| 553-71045 | HellermannTyton | Marker: cable-heat shrinkable; 25mm; yellow; thin walled |
| 0 | ||
| 66.1045-05022 | Stäubli Electrical Connectors | Test lead: single; 19A; banana socket 4mm,banana plug 4mm; red |
| 0 | ||
![]() Ameya Holding Limited | 1045 | Keystone Electronics Corp | Through Hole Brass Tin Plate Loop PC Test Point Terminal RoHS : Compliant | 47,354 | ||
STPS1045BY-TR![]() | STMicroelectronics | Automotive 45 V 10 A Surface Mount Power Schottky Rectifier - DPAK RoHS : Compliant | 24,771 | |||
| STPS1045B-TR | STMicroelectronics | STPS1045 Series 10 A 0.57 V Surface Mount Schottky Rectifier - TO-252-3 RoHS : Compliant | 23,114 | |||
| STPS1045B | STMicroelectronics | STPS1045B Series 10 A Forward 45 V DC Reverse Power Schottky Rectifier TO-252-3 RoHS : Compliant | 21,468 | |||
STPS1045D![]() | STMicroelectronics | STPS1045 Series 0.57 V 10 A Flange Mount Schottky Rectifier - TO-220-AC RoHS : Compliant | 19,504 | |||
MBR1045G![]() | onsemi | RoHS : Compliant | 6,200 | |||
![]() ComSIT USA | BYS1045TR | tfk | Rectifier Diode, Schottky, 1 Phase, 1 Element, 1.5A, 45V V(RRM), Silicon, DO-214 RoHS : Not Compliant | 43,275 | ||
STPS1045F![]() | STMicroelectronics | POWER SCHOTTKY RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 10A, 45V V(RRM), Silicon, TO-220AC RoHS : Not Compliant | 42,750 | |||
| STPS1045BYTR | STMicroelectronics | AUTOMOTIVE POWER SCHOTTKY RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 10A, 45V V(RRM), Silicon RoHS : Compliant | 15,945 | |||
| SBR1045SP513 | Diodes Incorporated | 10 A SBR POWERDI 5 SUPER BARRIER RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 10A, 45V V(RRM), Silicon RoHS : Compliant | 10,000 | |||
| CAPMKTRAD100N10450LS75 | xinyuan | Electronic Component RoHS : Compliant | 10,000 | |||
| RF1045000 | TE Connectivity | POLYSWITCH RESETTABLE DEVICE PTC Resettable Fuse, Through Hole Mount RoHS : Compliant | 8,000 | |||
| SN10454DR | Texas Instruments | Electronic Component RoHS : Not Compliant | 6,560 | |||
| CAPMKTRAD10N10450LS75 | xinyuan | Electronic Component RoHS : Compliant | 6,000 | |||
| VBT1045BPE34W | Vishay Intertechnologies | Rectifier Diode, Schottky, 1 Phase, 1 Element, 10A, 45V V(RRM), Silicon, TO-263AB RoHS : Compliant | 4,000 | |||
SK1045D1![]() | Diotec Semiconductor AG | SINGLE DIODE SURFACE MOUNT SCHOTTKY RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 10A, 45V V(RRM), Silicon, TO-252AA RoHS : Compliant | 3,000 | |||
| SJD351045 | Same Sky | DUAL STACK 3.5 MM STEREO JACK PCB MT 6 Pole(s), Female, Solder Terminal, Locking, Jack RoHS : Compliant | 2,600 | |||
| SN104545DR | Texas Instruments | Electronic Component RoHS : Compliant | 2,500 | |||
| MBR1045CT | TSC Electronics Ltd | 10 AMP, 45 VOLT SCHOTTKY BARRIER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 2 Element, 5A, 45V V(RRM), Silicon, TO-220AB RoHS : Not Compliant | 650 | |||
| B1045 | onsemi | Electronic Component RoHS : Compliant | 450 | |||
MBRB1045T4![]() | onsemi | SURFACE MOUNT POWER PACKAGE SWITCHMODE SCHOTTKY POWER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 10A, 45V V(RRM), Silicon RoHS : Not Compliant | 365 | |||
![]() PEI Genesis | BMPP10-45R | Anderson Power Products |
| 34 | ||
| BMPP10-45P | Anderson Power Products |
| 15 | |||
| DCP.91.045.TN | LEMO connectors | RoHS : Compliant |
| 10 | ||
| 104552-0000 | ITT Interconnect Solutions |
| 0 | |||
| SE97-010-4-5 | SOURIAU-SUNBANK |
| 0 | |||
| 10-497641-045 | Amphenol Corporation |
| 0 | |||
| 104-54L | HellermannTyton |
| 0 | |||
| 10-457996-08H | Amphenol Corporation |
| 0 | |||
| M85049/10-45S | SOURIAU-SUNBANK |
| 0 | |||
| 104-533-9043 | SOURIAU-SUNBANK |
| 0 | |||
| 10-497591-045 | Amphenol Corporation |
| 0 | |||
| 104-533-9042 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/10-45B | SOURIAU-SUNBANK |
| 0 | |||
| 515-1045F | Dialight | RoHS : Compliant |
| 0 | ||
| 104-533-9044 | SOURIAU-SUNBANK |
| 0 | |||
![]() Richardson RFPD | PSEPM1045-24E2 | Wall Industries Inc | AC/DC Power Supply Dual-OUT 24V/5V 1.45A/2A 45W 14 RoHS : Compliant | 0 | ||
| SI5345A-D10459-GMR | Skyworks Solutions Inc | 10-Channel, Any-Frequency, Any-Output Jitter Atten RoHS : Compliant | 0 | |||
| WMIEAS1045A2X | Wall Industries Inc | ACTODC CONVERTR MOD | 0 | |||
| 1045418-1 | TE Connectivity | Conn SSMA 0Hz to 18GHz 50Ohm Solder RA Cable Mount RoHS : Compliant | 0 | |||
| 1045621-1 | TE Connectivity | Conn SSMA 0Hz to 18GHz 50Ohm Solder Pot RA Flange RoHS : Compliant | 0 | |||
| WMIEAS1045A1X | Wall Industries Inc | ACTODC CONVERTR MOD | 0 | |||
| SI5332AD10456-GM3R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT 4 RoHS : Compliant | 0 | |||
| PSEP1045-0500 | Wall Industries Inc | AC/DC Power Supply Single-OUT 5V 9A 45W 14-Pin RoHS : Compliant | 0 | |||
| PSEPM1045-24T2 | Wall Industries Inc | AC/DC Power Supply Triple-OUT 24V/5V/-12V 1.3A/2A/ RoHS : Compliant | 0 | |||
| PSEP1045-3600 | Wall Industries Inc | AC/DC Power Supply Single-OUT 36V 1.25A 45W 14-Pin RoHS : Compliant | 0 | |||
| PSEPM1045-12T3 | Wall Industries Inc | AC/DC Power Supply Triple-OUT 12V/5V/-12V 2.2A/3A/ RoHS : Compliant | 0 | |||
| ON1045E-R65 | Ohmite Mfg Co | Carbon Film Resistors RoHS : Compliant |
| 0 | ||
| OK1045E-R52 | Ohmite Mfg Co | Res Carbon Film 100K Ohm 5% 0.25W(1/4W) -700ppm/C RoHS : Compliant |
| 0 | ||
| 104505-7 | TE Connectivity | Contact PIN Crimp ST Cable Mount 22-26AWG Loose RoHS : Not Compliant |
| 0 | ||
| 1045672-1 | TE Connectivity | Conn SSMA 0Hz to 18GHz 50Ohm Solder ST Thru-Hole R RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 321045- | TE Connectivity | INSTOCK | 42,056 | ||
DS1045S-3+![]() | Maxim Integrated Products | INSTOCK RoHS : Compliant | 7,791 | |||
| 104548 A1 14.09.2017 | INSTOCK | 5,195 | ||||
| BYS10-45-E3 | INSTOCK | 1,485 | ||||
| 104550.ETZ 1B 14.05.2018 | INSTOCK | 750 | ||||
| 104517 1B VOM 10.08.17 | INSTOCK | 531 | ||||
| XC411045FUR2 | INSTOCK | 291 | ||||
| MXP A010 4505 | FEME | INSTOCK | 127 | |||
| MBR1045 | INSTOCK | 111 | ||||
| AM27H01045DC | AMD | INSTOCK | 80 | |||
| 104598 A1 07.12.2017 | INSTOCK | 74 | ||||
| MBR 1045 | INSTOCK | 50 | ||||
| 104536.ETZ A1B 07.02.2018 | INSTOCK | 31 | ||||
| MBR1045 | Littelfuse Inc | INSTOCK RoHS : Compliant | 13 | |||
| 104549-7 | TE Connectivity | INSTOCK RoHS : Not Compliant | 12 | |||
![]() Avnet Abacus | 541045031 | Molex | Conn FFCFPC Socket 50 POS 05mm Solder RA SMD - Tape and Reel (Alt: 541045031) RoHS : Compliant | 109,500 | ||
| 321045 | TE Connectivity | Ring Terminal 16 to 14AWG M6 Tin (Alt: 321045) RoHS : Compliant | 35,000 | |||
| M300-MV31045M1 | Harwin | (Alt: M300-MV31045M1) RoHS : Compliant | 3,375 | |||
| 26481045 | Molex | Conn Unshrouded Header HDR 4 POS 396mm Solder ST ThruHole Bulk (Alt: 26481045) RoHS : Compliant | 1,150 | |||
| RWM10452201JB25E1 | Vishay Intertechnologies | Resistor 22 kOhm 5 25 W Axial Leaded Wirewound Power (Alt: RWM10452201JB25E1) RoHS : Compliant | 1,050 | |||
| 5-104549-2 | TE Connectivity | Conn Shrouded Header 20 POS 127mm Solder ST Surface Mount (Alt: 5-104549-2) RoHS : Compliant | 972 | |||
| M50-4301045 | Harwin | PCB Receptacle BoardtoBoard 127 mm 2 Rows 20 Contacts Surface Mount Archer M50 Series (Alt: M50-4301045) RoHS : Compliant | 592 | |||
| 1104544 | Phoenix Contact | Conn Stacking Receptacle 80 POS 08mm Solder RA SMD (Alt: 1104544) RoHS : Compliant | 400 | |||
| 1104548 | Phoenix Contact | Conn Stacking Header 12 POS 08mm Solder RA SMD (Alt: 1104548) RoHS : Compliant | 400 | |||
| 1104541 | Phoenix Contact | Conn Stacking Receptacle 20 POS 08mm Solder RA SMD (Alt: 1104541) RoHS : Compliant | 400 | |||
| 1104551 | Phoenix Contact | Conn Stacking Header 52 POS 08mm Solder RA SMD (Alt: 1104551) RoHS : Compliant | 400 | |||
| FN2410-45-33 | TE Connectivity | (Alt: 806111-SF) RoHS : Compliant | 340 | |||
| KA1-0450005 | Harwin | Contact Socket Crimp Straight Cable Mount (Alt: KA1-0450005) RoHS : Compliant | 100 | |||
| ZPF000000000104587 | TE Connectivity | (Alt: ZPF000000000104587) RoHS : Compliant | 100 | |||
| M300-FV3104500 | Harwin | PCB Receptacle Black Green WiretoBoard 3 mm 2 Rows 10 Contacts Through Hole Straight (Alt: M300-FV3104500) RoHS : Compliant | 99 | |||
![]() Avnet Asia | S70-220101045R | Harwin | (Alt: S70-220101045R) RoHS : Compliant | 0 | ||
| TMS-104-51-G-S | Samtec Inc | (Alt: TMS-104-51-G-S) RoHS : Compliant | 0 | |||
| FSV1045V | onsemi | 10 A, 45 V Ultra-Low VF Schottky Rectifier (Alt: FSV1045V) RoHS : Compliant | 0 | |||
| SBM1045VPC | PanJit Semiconductor | (Alt: SBM1045VPC) RoHS : Compliant | 0 | |||
| SVM1045VB | PanJit Semiconductor | Diode Schottky 10A 3-Pin TO-277B (Alt: SVM1045VB) RoHS : Compliant | 0 | |||
| VS-STPS1045BTR-M3 | Vishay Intertechnologies | (Alt: VS-STPS1045BTR-M3) RoHS : Compliant |
| 0 | ||
| 321045 | TE Connectivity | (Alt: 321045) RoHS : Compliant | 0 | |||
| 5-104505-6 | TE Connectivity | (Alt: 5-104505-6) RoHS : Compliant | 0 | |||
| 3-104-513 | Schurter Electronic Components | (Alt: 3-104-513) RoHS : Compliant | 0 | |||
| BYS10-45-E3/TR3 | Vishay Intertechnologies | 1A,45V,SM SCHOTTKY RECT (Alt: BYS10-45-E3/TR3) RoHS : Compliant | 0 | |||
| MBC41-045-0 | Power Integrations | Ribbon Cable 450mm 4Pin for ISO5125I High Voltage Insulated DC/DC Power Supply (Alt: MBC41-045-0) RoHS : Compliant | 0 | |||
| VS-STPS1045BTRL-M3 | Vishay Intertechnologies | (Alt: VS-STPS1045BTRL-M3) RoHS : Compliant | 0 | |||
| STS321045B502AH | Eaton Corporation | (Alt: STS321045B502AH) RoHS : Compliant | 0 | |||
| 0541045031 | Molex | FFC / FPC Board Connector, 50 Contacts, 1 Row, 0.5mm, Top, Gold, SMT, Right Angle, 0.3mm, Solder (Alt: 0541045031) RoHS : Compliant | 0 | |||
| BYS10-45-E3/TR | Vishay Intertechnologies | Schottky Rectifier, 45 V, 1.5 A, Single, DO-214AC (SMA), 2 Pins, 500 mV (Alt: BYS10-45-E3/TR) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MBRD1045T4G | onsemi | Schottky Rectifier 45 V 10 A Single TO252 DPAK 3 Pins 840 mV (Alt: MBRD1045T4G) RoHS : Compliant | 310,000 | ||
STPS1045BY-TR![]() | STMicroelectronics | Schottky Rectifier 45 V 10 A Dual Common Cathode TO252 DPAK 3 Pins 630 mV (Alt: STPS1045BY-TR) RoHS : Compliant | 85,000 | |||
| STPS1045B | STMicroelectronics | Diode Schottky 45V 10A 3Pin2Tab DPAK Tube (Alt: STPS1045B) RoHS : Compliant | 65,925 | |||
| STPS1045B-TR | STMicroelectronics | Small Signal Schottky Diode Single 45 V 10 A 630 mV 75 A 175 C (Alt: STPS1045B-TR) RoHS : Compliant | 20,000 | |||
STPS1045D![]() | STMicroelectronics | Schottky Rectifier 45 V 10 A Single TO220AC 2 Pins 600 mV (Alt: STPS1045D) RoHS : Compliant | 16,800 | |||
SBR1045CTL-13![]() | Diodes Incorporated | (Alt: SBR1045CTL-13) RoHS : Compliant | 5,000 | |||
MBR1045G![]() | onsemi | Schottky Barrier Rectifier 10 A 45 V (Alt: MBR1045G) RoHS : Compliant | 4,900 | |||
| ZXMS81045SP-13 | Diodes Incorporated | (Alt: ZXMS81045SP-13) RoHS : Compliant | 2,500 | |||
SBR1045CTLQ-13![]() | Diodes Incorporated | (Alt: SBR1045CTLQ-13) RoHS : Compliant | 2,500 | |||
SBR1045SD1-T![]() | Diodes Incorporated | (Alt: SBR1045SD1-T) RoHS : Compliant | 1,200 | |||
| FSV1045V | onsemi | 10 A 45 V UltraLow VF Schottky Rectifier (Alt: FSV1045V) RoHS : Compliant | 0 | |||
| PDS1045-13 | Diodes Incorporated | Schottky Rectifier POWERDI 45 V 10 A Single PowerDI 5 2 Pins 510 mV (Alt: PDS1045-13) RoHS : Compliant | 0 | |||
| STPS1045SFY | STMicroelectronics | Schottky Rectifier 45 V 10 A Single TO277A 3 Pins 620 mV (Alt: STPS1045SFY) RoHS : Compliant | 0 | |||
| SB1045 _T0 _10001 | PanJit Semiconductor | Diode Schottky 45V 10A 2Pin2Tab TO220AC Bulk (Alt: SB1045_T0_00001) RoHS : Compliant | 0 | |||
| R7F7010453AFP-C#KA2 | Renesas Electronics Corporation | LFQFP100 A IC MCU (Alt: R7F7010453AFP-C#KA2) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | MA1045.A.ALBTX.002 | Taoglas Antenna Solutions | MA1045 Supercombo Vehicle Mount 5in1 Antenna 2*GPS, Cellular, AM/FM SiriusXM |
| 0 | |
| CAB.01045 | Taoglas Antenna Solutions | Coaxial Cable SMA to MMCX, 9.8" Length |
| 0 | ||
![]() Component Electronics, Inc | 104505-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6,650 | |
| BCR1/10-4532FT | TT electronics / BI Technologies | IN STOCK SHIP TODAY |
| 5,000 | ||
| 725M10456JA3 | SB ELECTRONI | IN STOCK SHIP TODAY | 3,000 | |||
| RMC1/10-45K3-1% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 1,990 | ||
| 104503-9 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,900 | ||
| 54104-5090 | Molex | IN STOCK SHIP TODAY | 973 | |||
| MBR1045 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 312 | ||
MBR1045![]() | onsemi | IN STOCK SHIP TODAY RoHS : Compliant | 203 | |||
| 10-05-1045 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 188 | ||
| 104549-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 69 | ||
| MBR1045 | General Instrument | IN STOCK SHIP TODAY |
| 47 | ||
MBR1045![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 29 | ||
| 5-1393104-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 21 | ||
| MBR1045 | Vishay Semiconductors | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| 104550-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
![]() EBV Elektronik | STPS1045SFY | STMicroelectronics | Schottky Rectifier 45 V 10 A Single TO277A 3 Pins 620 mV (Alt: STPS1045SFY) RoHS : Compliant | 120,000 | ||
| STPS1045B-TR | STMicroelectronics | Small Signal Schottky Diode Single 45 V 10 A 630 mV 75 A 175 C (Alt: STPS1045B-TR) RoHS : Compliant | 25,000 | |||
| BYS10-45HE3_A/I | Vishay Intertechnologies | DO214AC SMA (Alt: BYS10-45HE3_A/I) RoHS : Compliant | 7,500 | |||
| BYS10-45-E3/TR | Vishay Intertechnologies | Schottky Rectifier 45 V 15 A Single DO214AC SMA 2 Pins 500 mV (Alt: BYS10-45-E3/TR) RoHS : Compliant | 7,200 | |||
| STPS1045B | STMicroelectronics | Diode Schottky 45V 10A 3Pin2Tab DPAK Tube (Alt: STPS1045B) RoHS : Compliant | 3,075 | |||
| MBRB1045-M3/I | Vishay Intertechnologies | (Alt: MBRB1045-M3/I) RoHS : Compliant | 800 | |||
| MBR1045 | Taiwan Semiconductor | Diode Schottky 45V 10A 3Pin TO220AC Tube (Alt: MBR1045) RoHS : Compliant | 0 | |||
| FSV1045V | onsemi | 10 A 45 V UltraLow VF Schottky Rectifier (Alt: FSV1045V) RoHS : Compliant | 0 | |||
| MBRS1045CTH | Taiwan Semiconductor | Diode Schottky 45V 10A 3Pin TO263AB TR (Alt: MBRS1045CTH) RoHS : Compliant | 0 | |||
| MBR1045-E3/45 | Vishay Intertechnologies | (Alt: MBR1045-E3/45) RoHS : Compliant | 0 | |||
| MBRB1045-E3/81 | Vishay Intertechnologies | (Alt: MBRB1045-E3/81) RoHS : Compliant | 0 | |||
| VFT1045C-M3/4W | Vishay Intertechnologies | 10A45VTRENCH SKY RECT (Alt: VFT1045C-M3/4W) RoHS : Compliant | 0 | |||
| VFT1045BP-M3/4W | Vishay Intertechnologies | 10A45VTRENCH SKY RECT (Alt: VFT1045BP-M3/4W) RoHS : Compliant | 0 | |||
| VS-VSKDS201/045 | Vishay Intertechnologies | Modules Rectifiers AAP SK (Alt: VS-VSKDS201/045) RoHS : Compliant | 0 | |||
| VS-MBRB1045TRRHM3 | Vishay Intertechnologies | Schottky D2PAK (Alt: VS-MBRB1045TRRHM3) RoHS : Compliant | 0 | |||
![]() ECCO | GM104576 | ITT Interconnect Solutions |
| 37 | ||
![]() Flip Electronics | NTS1045MFST1G | onsemi | Stock, Ship Today RoHS : Compliant | 99,000 | ||
| SBRB1045T4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 63,067 | ||
| NRVB1045MFST1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,000 | ||
| MBRD1045T4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,690 | ||
| R7S921045VCBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 980 | |||
MBRB1045G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 300 | ||
MBR1045G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 300 | ||
![]() Pasternack Enterprises US | PE91045 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 75 Ohm, Frequency, Min: DC, Frequency, Max: 500 MHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. 50 Ohm SMA Female to 75 Ohm F Male Adapter. SMA adapter PE91045 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to type F adapter is a between series coaxial adapter design. This 50 Ohm to 75 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 500 MHz. SMA female to F type male adapter is one of the many RF components that ship same day as they are ordered. PE91045 female SMA to male type F adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our female SMA to male type F adapter PE91045 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This SMA to type F radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 239 | |
| PEWCA1045 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-112, Coax Connector Impedance: 50 Ohm, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 7.05 GHz, Maximum Frequency: 10 GHz. WR-112 CPR-112G Grooved Flange to Type N Female Waveguide to Coax Adapter, 7.05 GHz to 10 GHz, H Band, Aluminum, Paint. PEWCA1045 WR-112 waveguide to coax adapter is also known as a WR-112 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR112 to type N connector and has a female gender. Our WR112 to type N female waveguide adapter transition has a right angle design and has a CPR-112G flange. Pasternack right angle WR-112 to N type waveguide to coaxial cable transition / adapter has a minimum frequency of 7.05 GHz and a maximum frequency of 10 GHz. WR-112 waveguide to N type transition adapter to coax PEWCA1045 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-112 waveguide adapter transition with type N interface can ship worldwide the same day that it is purchased as with our other available RF parts. |
| 16 | ||
| PE3C10451-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male to 2.92mm Female Bulkhead Cable 6 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm male to 2.92mm female bulkhead cable 6 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female bulkhead cable 6 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10451-6 can also be known as a 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm male to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm plug to 2.92mm jack cable assembly PE3C10451-6 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10451-6 can also be used in the other direction and will be a 2.92mm female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 4 | ||
| PE3C10457-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Female Bulkhead to 2.92mm Male Right Angle Cable 18 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 2.92mm male right angle cable 18 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 2.92mm male right angle cable 18 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a right angle 2.92mm cable connection on the other. Our 2.92mm to right angle 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10457-18 can also be known as a 2.92mm jack to right angle 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to right angle 2.92mm male cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm plug cable assembly PE3C10457-18 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10457-18 can also be used in the other direction and will be a right angle 2.92mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 2.92mm right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10458-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Male Right Angle to 2.92mm Male Right Angle Cable 6 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm male right angle to 2.92mm male right angle cable 6 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male right angle to 2.92mm male right angle cable 6 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle 2.92mm cable connection on one end and a right angle 2.92mm cable connection on the other. Our right angle 2.92mm to right angle 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C10458-6 can also be known as a right angle 2.92mm plug to right angle 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our right angle 2.92mm male to right angle 2.92mm male cable has a maximum VSWR of 1.4:1. 2.92mm plug to 2.92mm plug cable assembly PE3C10458-6 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with right angle 2.92mm to right angle 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm right angle plug to 2.92mm right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10453 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm. 2.92mm Female to 2.92mm Female Cable Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female to 2.92mm female cable using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female cable using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10453 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm female to 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10453 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. | 0 | |||
| PE3C10454-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 2.92mm Female to 2.92mm Female Bulkhead Cable 6 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female to 2.92mm female bulkhead cable 6 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm female bulkhead cable 6 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10454-6 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm female to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10454-6 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10454-6 can also be used in the other direction and will be a 2.92mm female bulkhead to 2.92mm female cable assembly if the opposite connectivity is required. 2.92mm jack to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10459 | Pasternack Enterprises | 0 | ||||
| PE3C10455 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm. 2.92mm Female to 2.92mm Male Right Angle Cable Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female to 2.92mm male right angle cable using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to 2.92mm male right angle cable using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a right angle 2.92mm cable connection on the other. Our 2.92mm to right angle 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10455 can also be known as a 2.92mm jack to right angle 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm female to right angle 2.92mm male cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm plug cable assembly PE3C10455 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10455 can also be used in the other direction and will be a right angle 2.92mm male to 2.92mm female cable assembly if the opposite connectivity is required. 2.92mm jack to 2.92mm right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. | 0 | |||
| PE3C10450-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to 2.92mm Female Cable 24 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm male to 2.92mm female cable 24 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female cable 24 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10450-24 can also be known as a 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm male to 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm plug to 2.92mm jack cable assembly PE3C10450-24 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10450-24 can also be used in the other direction and will be a 2.92mm female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10450-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Male to 2.92mm Female Cable 36 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm male to 2.92mm female cable 36 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female cable 36 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10450-36 can also be known as a 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our 2.92mm male to 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm plug to 2.92mm jack cable assembly PE3C10450-36 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10450-36 can also be used in the other direction and will be a 2.92mm female to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10456 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. TNC Male to Reverse Polarity TNC Male Cable Using RG58 Coax. PE3W10456 is a TNC male to reverse polarity TNC male cable using RG58 coax. This Pasternack TNC male to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10456 TNC male to TNC reverse polarity male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W10454LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. 4.3-10 Male to N Male Right Angle Cable Using LMR-600 Coax, LF Solder. PE3W10454LF is a 4.3-10 male to N male right angle cable using LMR-600 coax. This Pasternack 4.3-10 male to N male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm N for connector 2. 4.3-10 to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10454LF 4.3-10 male to N male right angle cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W10458 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to BNC Male Cable Using LMR-400-UF Coax. PE3W10458 is a N male right angle to BNC male cable using LMR-400-UF coax. This Pasternack N male right angle to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10458 N male right angle to BNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE6TR1045 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: 4.3-10, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.15:1, Maximum Power: 2 Watt. 2 Watt RF Load Up to 6 GHz with 4.3-10 Male. PE6TR1045 2 Watts RF load (also known as termination or dummy load) has a 4.3-10 connector that is male. This Pasternack 2 watts 4.3-10 male load / termination is rated for a maximum frequency of 6 GHz. Our 4.3-10 male termination load is a rf load termination with a 50 Ohm impedance. This 4.3-10 load / coax terminator is manufactured with no chain and brass body. Pasternack 50 Ohm 4.3-10 coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.15:1. PE6TR1045 2 watts 4.3-10 male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our 4.3-10 male 2 watts termination load will ship worldwide the same day as purchased. |
| 0 | ||
![]() Venkel Ltd. | CRN10-4-510JT | VENKEL LTD | Chip Resistor Array;CRN10;4;51R;�5%;Convex RoHS : Compliant | 30,000 | ||
| CRN10-4-5102FT | VENKEL LTD | Chip Resistor Array;CRN10;4;51K;�1%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-561JT | VENKEL LTD | Chip Resistor Array;CRN10;4;560R;�5%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-560JT | VENKEL LTD | Chip Resistor Array;CRN10;4;56R;�5%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-513JT | VENKEL LTD | Chip Resistor Array;CRN10;4;51K;�5%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-512JT | VENKEL LTD | Chip Resistor Array;CRN10;4;5.1K;�5%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-5R1JT | VENKEL LTD | Chip Resistor Array;CRN10;4;5.1R;�5%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-511JT | VENKEL LTD | Chip Resistor Array;CRN10;4;510R;�5%;Convex RoHS : Compliant | 0 | |||
| SVM1045V-UVL | VENKEL LTD | Rectifier;TO-277;45V;10A RoHS : Not Compliant | 0 | |||
| SVM1045VB-UVL | VENKEL LTD | Rectifier;TO-277;45V;10A RoHS : Not Compliant | 0 | |||
![]() Vyrian | PDS1045-7 | Diodes Incorporated | Rectifier Diode, Schottky, 1 Phase, 1 Element, 10A, 40V V(RRM), Silicon | 18,383 | ||
| SBG1045CT-T-F | Diodes Incorporated | Rectifier Diode, Schottky, 1 Phase, 2 Element, 10A, 45V V(RRM), Silicon | 17,734 | |||
| 1045621-1 | TE Connectivity | RF SSMA Connector, 1 Contact(s), Female, Panel Mount, Solder Terminal, Jack RoHS : Compliant | 13,288 | |||
| 1045496-1 | TE Connectivity | RF SSMA Connector, 1 Contact(s), Female, Cable Mount, Solder Terminal, Jack RoHS : Compliant | 11,596 | |||
| DST1045S-A | Littelfuse Inc | Rectifier Diode, Schottky, 1 Phase, 1 Element, 45V V(RRM), Silicon, TO-277B RoHS : Compliant | 11,562 | |||
| VS-STPS1045BTRPBF | Vishay Intertechnologies | Rectifier Diode, Schottky, 1 Phase, 1 Element, 10A, 45V V(RRM), Silicon RoHS : Compliant | 9,893 | |||
| 5962-01-045-3318 | Analog Devices Inc | D/A Converter, 12-Bit, 1 Func, Bipolar, CDIP24 RoHS : Not Compliant | 8,715 | |||
| MAX11045BETN-T | Analog Devices (Maxim Integrated) | 8,077 | ||||
| SN104552DR | Texas Instruments | 7,986 | ||||
| DS1045(DIP)-5 | Analog Devices Inc | Silicon Delay Line, Programmable, 1-Func, 15-Tap, True Output, CMOS, PDIP16 RoHS : Not Compliant | 7,467 | |||
| HMC1045LP3ETR | Analog Devices Inc | 6,937 | ||||
| MAX11045BECB+ | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 6 Channel, Parallel, Word Access, BICMOS, PQFP64 RoHS : Compliant | 6,752 | |||
| 1045418-1 | TE Connectivity | RF SSMA Connector, 1 Contact(s), Cable Mount, Solder Terminal, Locking, Plug RoHS : Compliant | 5,805 | |||
| 5962-01-045-8492 | Texas Instruments | Jbar-Kbar Flip-Flop, 2-Func, Positive Edge Triggered, TTL, PDIP14 RoHS : Not Compliant | 3,554 | |||
| MTC20F1045S1RC48BA2 | Micron Technology Inc | RoHS : Compliant | 2,318 | |||
![]() Waytek, Inc. | 19221-0458 | Molex | 4GA Copper Eyelet 3/8" Stud RoHS : Compliant |
| 4,480 | |
| 192210454 | Molex | 4GA Tinned Eyelet 1/2" Stud |
| 1,291 | ||
| 80610456446 | 3M | 12-10GA Heat Shrink Snap Spade #1/4 STUD |
| 548 | ||
| 192210453 | Molex | 4GA Copper Eyelet 1/2" Stud |
| 543 | ||
| 1045 | Blue Sea Systems | Fast Charge - Dual USB Charger **RETAIL** Socket Mount **RETAIL** |
| 19 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |