126G-AL5-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly TNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04126-36 can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W04126-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04126-36 can also be used in the other direction and will be right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components.

1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45

1,798

PE3W12625/SP-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink and 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 24 inch length using LMR-195-UF coax with heatshrink and 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12625/SP-24 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12625/SP-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W12625/SP-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $86.69
10 : $84.96
25 : $83.22
100 : $81.49

639

PE3W12619LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-LW600 Coax, LF Solder., Radio frequency assembly N male to N male low loss cable using LMR-LW600 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-LW600 coax, LF solder, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12619LF can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W12619LF is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-LW600 coax, LF solder.

597

PE3W12619

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-LW600 Coax., Radio frequency assembly N male to N male low loss cable using LMR-LW600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-LW600 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W12619 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W12619 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-LW600 coax.

597

PE3W12619-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male to N Male Low Loss Cable 72 Inch Length Using LMR-LW600 Coax., Radio frequency assembly N male to N male low loss cable 72 inch length using LMR-LW600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 72 inch length using LMR-LW600 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12619-72 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W12619-72 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 72 inch length using LMR-LW600 coax.

1 : $192.99
25 : $183.34
50 : $173.69
100 : $165.97

161

PE3M0312-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Female Cable 6 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0312-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0312-6 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0312-6 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMA pin to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0312-6 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements.

1 : $130.99
10 : $125.75
25 : $120.51
100 : $115.27

PE51265

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: 2.92mm, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Clamp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 40 GHz, Interface Type 1: PE-034SR, Interface Type 2: .034 Semi-Rigid. 2.92mm Male Right Angle Connector Clamp/Solder Attachment for PE-034SR, .034 Semi-Rigid. PE51265 2.92mm male right angle coaxial connector has an interface type of 2.92mm male which is compatible with PE-034SR and .034 Semi-Rigid cables and has an impedance of 50 Ohms. Pasternack's 2.92mm male connector uses clamp/solder as an attachment method. Our male 2.92mm right angle coaxial connector provides a maximum frequency of 40 GHz. This 2.92mm male RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack right angle 2.92mm male coaxial connector has a PPO dielectric type and a VSWR of 1.35:1. Pasternack's 2.92mm coaxial connector has a stainless steel body with passivated plating. Our PE51265 2.92mm right angle connector uses a gold over nickel-plated beryllium copper contact.The Pasternack RF connector block has a maximum inner conductor and outer conductor resistance of 3 mOhms and 2 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from stainless steel material has a contact life of 500 cycles or more. The PE51265 2.92mm connector operates at a temperature range of -55 to 105 deg C. This threaded male 2.92mm coaxial RF connector has a maximum insertion loss of 0.252 dB. This right angle 2.92mm connector has a gold over nickel inner contact plating. The Pasternack 2.92mm male connector has a maximum operating voltage of 250 Vrms and a dielectric withstanding voltage of 750 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. It also consists of a beryllium copper retaining ring that meets copper-tin-zinc alloy compliance. Our right angle 2.92mm male connector has a length of 0.704724 inches, a width of 0.291339 inches, and a weight of 0.015 lbs. This Pasternack right angle male 2.92mm connector will ship the same business day as purchased. Our 2.92mm right angle male connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $190.99
10 : $183.35
25 : $175.71
100 : $168.07

PE3C11263

Pasternack Enterprises

PE3C1260

Pasternack Enterprises

PE3W12613

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male to 2.4mm Female Cable Using PE-SR405FLJ Coax. PE3W12613 is a SMA male to 2.4mm female cable using PE-SR405FLJ coax. This Pasternack SMA male to 2.4mm female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male SMA to female 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W12613 SMA male to 2.4mm female cable assembly is constructed with PE-SR405FLJ coax.

PE3W12617/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Male Cable Using LMR-600-UF Coax with HeatShrink. PE3W12617/HS is a N female bulkhead to N male cable using LMR-600-UF coax. This Pasternack N female bulkhead to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12617/HS N female bulkhead to N male cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W12695

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to MMCX Jack Cable Using RG316 Coax., Radio frequency assembly TNC male right angle to MMCX jack cable using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to MMCX jack cable using RG316 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and MMCX cable connection on the other. Our right angle TNC to MMCX cable assemblies have a male gender on end 1 and jack on end 2. PE3W12695 can also be known as a right angle TNC plug to MMCX female cable assembly and will be shipped same-day as it is purchased. TNC plug to MMCX female cable assembly PE3W12695 is built with RG316 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC right angle male to MMCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12695 can also be used in the other direction and will be MMCX jack to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to MMCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to MMCX cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to MMCX jack cable using RG316 coax.

PE3C1266

Pasternack Enterprises

PE3C2126/HS-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to BNC Male Right Angle Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male right angle to BNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to BNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle BNC cable connection on the other. Our low loss right angle SMA to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2126/HS-100CM can also be known as a low loss right angle SMA plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C2126/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 2 GHz maximum frequency SMA right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2126/HS-100CM can also be used in the other direction and will be right angle BNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male right angle low loss cable 100 cm length using LMR-100 coax with heatshrink.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE3FCA126-7M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, SM OS2, 2.0mm Riser, Yellow-7M. Pasternack’s PE3FCA126-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA126-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $23.59
5 : $22.65
10 : $21.7
25 : $20.76

Venkel Ltd.

SHPI121260S-2R1MU

VENKEL LTD

Shielded High Power Inductor;121260;Standard;2.1uH;�20%
RoHS : Compliant

SHPI121260S-331MU

VENKEL LTD

Shielded High Power Inductor;121260;Standard;330uH;�20%
RoHS : Compliant

ULCR2512-6M50JT

VENKEL LTD

Ultra Low Value CR;2512;6.5m;�5%
RoHS : Compliant

UPTF0402-16W-N-1261BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;1.26K;�0.1%
RoHS : Compliant

UPTF0805-10W-N-1260AT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;126R;�0.05%
RoHS : Compliant

UPTF1206-8W-E-1263AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;25PPM;126K ;�0.05%
RoHS : Compliant

UPTF1206-8W-P-1260UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;5PPM;126R;�0.01%
RoHS : Compliant

UPTF1206-8W-P-1262DT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;5PPM;12.6K;�0.5%
RoHS : Compliant

UPTF2010-2W-P-1260BT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�5PPM;126R;�0.1%
RoHS : Compliant

UPTF2010-2W-P-1261UT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�5PPM;1.26K;�0.01%
RoHS : Compliant

SWCR1210-VK-126KT

VENKEL LTD

Surge Withstanding CR;1210;1/2W;�100PPM;12M;�10%
RoHS : Compliant

UPTF0402-16W-N-1261BT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;1.26K;�0.1%
RoHS : Compliant

UPTF0603-16W-P-1262AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�5PPM;12.6K;�0.05%
RoHS : Compliant

UPTF0805-10W-N-1263BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;126K ;�0.1%
RoHS : Compliant

TFCR0402-16W-C-1260BT

VENKEL LTD

Thin Film CR;0402;1/16W;�50PPM;126R;�0.1%
RoHS : Compliant

Vyrian

10112684-F03-10ULF

Amphenol Communications Solutions

Board Connector, 10 Contact(s), 1 Row(s), Male, Right Angle, 0.079 inch Pitch, Surface Mount Terminal, Black Insulator

12,124

5962-01-269-8322

Analog Devices Inc

Operational Amplifier, 1 Func, 1000uV Offset-Max, BIPolar, MBCY8
RoHS : Not Compliant

11,841

V62/12630-01XB

Analog Devices Inc

Analog Circuit, Hybrid, PDSO8
RoHS : Not Compliant

10,699

74AHC1G126MDCKTEP

Texas Instruments

Bus Driver, AHC/VHC/H/U/V Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5
RoHS : Compliant

9,685

ADUC7126BSTZ126

Analog Devices Inc

RISC Microcontroller, 32-Bit, FLASH, ARM7 CPU, 41.78MHz, CMOS, PQFP80
RoHS : Compliant

8,735

2814126

Phoenix Contact

Sensors/Detector Modules
RoHS : Compliant

8,519

V62/12610-02XE

Texas Instruments

Operational Amplifier, 2 Func, 250uV Offset-Max, PDSO8

7,631

ADUC7126BSTZ126-RL

Analog Devices Inc

RISC Microcontroller, 32-Bit, FLASH, ARM7 CPU, 41.78MHz, CMOS, PQFP80
RoHS : Compliant

6,435

ADUC7126BSTZ126I

Analog Devices Inc

RISC Microcontroller, 32-Bit, FLASH, ARM7 CPU, 41.78MHz, CMOS, PQFP80
RoHS : Compliant

6,258

74AHC1G126GW,165

NXP Semiconductors

Bus Driver, AHC/VHC/H/U/V Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5
RoHS : Compliant

5,784

V62/12663-01XB

Analog Devices Inc

D/A Converter, 16-Bit, 4 Func, CMOS, PDSO28
RoHS : Not Compliant

5,118

ADUC7126BSTZ126IRL

Analog Devices Inc

RISC Microcontroller, 32-Bit, FLASH, ARM7 CPU, 41.78MHz, CMOS, PQFP80
RoHS : Compliant

4,949

V62/12619-01XE

Texas Instruments

Operational Amplifier, 1 Func, 100uV Offset-Max, BIPolar, PDSO8
RoHS : Compliant

3,782

391265BK001

Alpha Wire

Wire And Cable
RoHS : Compliant

734

55A0111-26-4

TE Connectivity

Wire And Cable, 1 Conductor(s), 26AWG, 600V, Flexible Cord And Fixture Wire
RoHS : Compliant

164

Waytek, Inc.

140126-91W

General Cable Technologies Corporation

14GA TXL Blue Cross-Link Automotive Wire XLPE -51C to 125C

500 : $0.2317
1,000 : $0.1869
2,000 : $0.1621
5,000 : $0.1492

62,000

2126

Heyco

Heyco 2126 snap bushing is a nylon panel bushing sized for a .875" mounting hole to protect wire and cable as it passes through sheet metal or panel openings. Its snap-in design supports quick installation, abrasion protection, and cleaner wire routing in electrical and equipment applications.

100 : $0.0554
200 : $0.0533
500 : $0.0516
1,000 : $0.0488
5,000 : $0.0486

16,101

12020126-L

Aptiv PLC

16-14 GA Male Metri-Pack 630 Loose Piece Terminal 12020126-L

20 : $0.458
50 : $0.3948
100 : $0.3645
200 : $0.3474
500 : $0.3251
1,000 : $0.3106

3,165

15327126

Aptiv PLC

Ducon 9.5 Cable Seal 10 GA GXL/GPT

10 : $0.275
50 : $0.22
100 : $0.209
200 : $0.187
500 : $0.187
1,000 : $0.176

2,520

12020126

Aptiv PLC

16-14 GA Male Metri-Pack 630 Terminal 12020126 2000/Reel
RoHS : Compliant

2,000 : $0.2009
10,000 : $0.1876

2,000

1684126121208

Trombetta

12V Powerseal DC Relay Contactor 4 Terminals

1 : $26.02
5 : $23.23
10 : $21.7
50 : $20.44
100 : $19.54
200 : $18.53

167

684-1261-032-02

Trombetta

Sealed 12V DC Contactor Continous Duty, Curved L-Bracket Silver Contacts

1 : $41.08
5 : $36.68
10 : $34.23
50 : $32.28
100 : $30.8
200 : $29.34

901262

Egis Mobile Electric

Busbar, TH2 / 8+2 Series Connection, Bulk Pack

3 : $3.131
50 : $2.626
100 : $2.2826
200 : $2.1311
500 : $2.0503

63811-2600

Molex

Crimp Tool 33000 Series 22-18GA 63811-2600
RoHS : Compliant

1 : $548.25
10 : $515.14

Win Source Electronics

SN74LVC1G126DBV

Texas Instruments

SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUTS

8,850 : $0.0339
7,105 : $0.0352
5,465 : $0.0366
3,820 : $0.0393
2,460 : $0.0407
1,150 : $0.0435

316,568

NC7SZ126P5X_NL

Fairchild Semiconductor Corporation

TinyLogic UHS Buffer with 3-STATE Output
RoHS : Compliant

6,050 : $0.0496
4,845 : $0.0516
3,725 : $0.0537
2,600 : $0.0577
1,680 : $0.0597
785 : $0.0637

112,240

NL27WZ126US

onsemi

IC BUFFER NON-INVERT 5.5V US8
RoHS : Not Compliant

6,190 : $0.0485
4,625 : $0.0541
3,580 : $0.0559
2,600 : $0.0578
1,680 : $0.0597
690 : $0.0727

75,000

74AUP1G126SE-7

Diodes Incorporated

IC BUS/BUFF DVR 3-ST SOT353
RoHS : Compliant

1,000 : $0.3013
745 : $0.3361
580 : $0.3476
420 : $0.3592
270 : $0.3708
115 : $0.4519

70,245

WSLP25126L000FEA

Vishay Huntington

RES 0.006 OHM 1% 3W 2512

765 : $0.394
570 : $0.4394
440 : $0.4546
320 : $0.4697
210 : $0.4849
85 : $0.591

40,000

SN74HC126DT

Texas Instruments

IC BUS BUFF 3ST QUAD 14SOIC
RoHS : Compliant

1,510 : $0.223
1,130 : $0.2488
875 : $0.2573
635 : $0.2659
410 : $0.2744
170 : $0.3344

30,000

TPS61261DRVT

Texas Instruments

IC REG BOOST 3.3V 0.1A SYNC 6SON / Conv DC-DC 0.8V to 4V Step Up Single-Out 1.8V to 4V 0.1A 6-Pin WSON EP T/R
RoHS : Compliant

385 : $0.7848
290 : $0.8753
225 : $0.9055
165 : $0.9357
105 : $0.9659
45 : $1.1771

28,074

SN74AHCT126QPWRQ1

Texas Instruments

IC BUF NON-INVERT 5.5V 14TSSOP / QUADRUPLE BUS BUFFER GATE WITH 3-STATE OUTPUTS
RoHS : Compliant

1,350 : $0.2224
1,010 : $0.2481
780 : $0.2566
570 : $0.2652
370 : $0.2737
150 : $0.3336

20,000

SN74CBT3126DBQRG4

Texas Instruments

IC SWITCH BUS FET QUAD 16SSOP
RoHS : Compliant

670 : $0.5042
500 : $0.5624
385 : $0.5818
280 : $0.6012
185 : $0.6206
75 : $0.7563

15,738

QPA9126TR7

Qorvo

HIGH LINEARITY GAIN BLOCK
RoHS : Compliant

51 : $5.9091
38 : $6.591
30 : $6.8182
22 : $7.0455
14 : $7.2728
6 : $8.8637

12,500

WSL25126L000FEA

Vishay Huntington

RES SMD 0.006 OHM 1% 2W 2512

850 : $0.3546
635 : $0.3955
490 : $0.4091
355 : $0.4228
230 : $0.4364
95 : $0.5319

8,984

CY62126EV30LL-45BVXI

Cypress Semiconductor

1-Mbit (64K x 16) Static RAM
RoHS : Compliant

148 : $2.0376
111 : $2.2727
86 : $2.351
62 : $2.4294
40 : $2.5078
17 : $3.0563

7,189

INA2126EA/2K5

Texas Instruments

IC INST AMP 2 CIRCUIT 16SSOP
RoHS : Compliant

47 : $7.2113
35 : $8.0434
27 : $8.3207
20 : $8.5981
13 : $8.8754
6 : $10.817

4,950

LTC1262IS8

Linear Technology

12V, 30mA Flash Memory Programming Supply
RoHS : Not Compliant

31 : $10.9474
23 : $12.2106
18 : $12.6316
13 : $13.0527
9 : $13.4737
4 : $16.4211

2,665

MAX6126A25+

Maxim Integrated Products

IC VREF SERIES 2.5V 8UMAX
RoHS : Compliant

27 : $12.8471
20 : $14.3294
16 : $14.8235
11 : $15.3177
8 : $15.8117
3 : $19.2705

292

Wuhan P&S

NC7WZ126L8X

onsemi

UHS BUFFER 3-STATE OUTPUT
RoHS : Compliant

1 : $0.32
100 : $0.2
500 : $0.17
1,000 : $0.16

90,000

MC74VHC1GT126DBVT1G-Q

onsemi

LOG CMOS BUFR NINVERT
RoHS : Compliant

1 : $0.06
100 : $0.04
500 : $0.03
1,000 : $0.03

18,000

M74VHC1GT126DT1G

onsemi

3~5.5V,Single Non-Inverting Buffer,TTL Level
RoHS : Compliant

1 : $0.1789
100 : $0.1142
500 : $0.0942
1,000 : $0.0866

5,915

VO1263AACTR

Vishay Intertechnologies

Dual Photovoltaic MOSFET Driver Solid-State Relay
RoHS : Compliant

1 : $19.53
100 : $6.51
500 : $6.03
1,000 : $5.86

4,000

126G-AL5-R Reseller

Enlace URL