 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
1600Z-R2 Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3W11600-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Female Bulkhead to N Male Cable 36 Inch Length Using RG141 Coax., Radio frequency assembly TNC female bulkhead to N male cable 36 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 36 inch length using RG141 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and N type cable connection on the other. Our TNC to type N cable assemblies have a female gender on end 1 and male on end 2. PE3W11600-36 can also be known as a TNC jack to type N plug cable assembly and will be shipped same-day as it is purchased. TNC jack to type N plug cable assembly PE3W11600-36 is built with RG141 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11600-36 can also be used in the other direction and will be N type male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 36 inch length using RG141 coax. |
| 197 | |
| PE3W11600-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Female Bulkhead to N Male Cable 60 Inch Length Using RG141 Coax., Radio frequency assembly TNC female bulkhead to N male cable 60 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 60 inch length using RG141 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and N type cable connection on the other. Our TNC to type N cable assemblies have a female gender on end 1 and male on end 2. PE3W11600-60 can also be known as a TNC jack to type N plug cable assembly and will be shipped same-day as it is purchased. TNC jack to N type plug cable assembly PE3W11600-60 is built with RG141 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11600-60 can also be used in the other direction and will be N type male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 60 inch length using RG141 coax. |
| 197 | ||
| PE3W11600-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Female Bulkhead to N Male Cable 12 Inch Length Using RG141 Coax., Radio frequency assembly TNC female bulkhead to N male cable 12 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 12 inch length using RG141 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and N type cable connection on the other. Our TNC to type N cable assemblies have a female gender on end 1 and male on end 2. PE3W11600-12 can also be known as a TNC jack to type N plug cable assembly and will be shipped same-day as it is purchased. TNC jack to type N plug cable assembly PE3W11600-12 is built with RG141 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11600-12 can also be used in the other direction and will be type N male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 12 inch length using RG141 coax. |
| 197 | ||
| PE3W11600-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Female Bulkhead to N Male Cable 24 Inch Length Using RG141 Coax., Radio frequency assembly TNC female bulkhead to N male cable 24 inch length using RG141 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to N male cable 24 inch length using RG141 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and type N cable connection on the other. Our TNC to N type cable assemblies have a female gender on end 1 and male on end 2. PE3W11600-24 can also be known as a TNC jack to type N plug cable assembly and will be shipped same-day as it is purchased. TNC jack to type N plug cable assembly PE3W11600-24 is built with RG141 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11600-24 can also be used in the other direction and will be N type male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to N male cable 24 inch length using RG141 coax. |
| 197 | ||
| PE91600 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: 45 Degree, Connector Body Material 1: Passivated Stainless Steel, Connector Body Material 2: Passivated Stainless Steel. RF Adapter, 45 Degree Angle TNC plug to TNC jack 18GHz VSWR1.2. Tnc male to tnc female adapter part number PE91600 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. The RF adapter has a 50 Ohm impedance and maximum VSWR of 1.2:1. This RF adapter has a male to female gender configuration which provides easier connections in tighter spaces. Our tnc to tnc adapter is an in-series coaxial adapter design. This 50 Ohm tnc adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. tnc male to tnc female adapter is one of the many RF components that ship same day as they are ordered. PE91600 male tnc to female tnc adapter has a 45 degree body. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Our tnc male to tnc female adapter PE91600 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This high-quality adapter from Pasternack has a tnc to tnc connector is made from passivated stainless steel. Our tnc radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This tnc to tnc radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 18 GHz radio frequency adapter that meets your requirements. |
| 12 | ||
| PE3VNA4001-600 | Pasternack Enterprises |
| 3 | |||
| PEWRL1600 | Pasternack Enterprises | Key Specifications. Product Type Trihedral Corner Reflector Edge Length 16 Body Material Aluminum Reflector Surface Plating Gold Chem Film. 16 inches Edge Length, Trihedral Corner Reflector, Gray., The Pasternack PEWRL1600 is a precision trihedral corner reflector tailored for stringent applications within antennas and radar systems. With a compact edge length of 16 inches, this reflector is meticulously engineered with a trihedral geometry to ensure optimal signal reflection and minimal signal loss. The trihedral corner reflector antenna simulates radar target precisely and is widely used for radar system calibration. Made from aluminum and coated with a robust gray powder coat finish, this corner reflector provides a professional appearance while protecting against environmental elements. Internally, the reflector features a gold chemical film finish, to enhance conductivity and elevate overall performance. Adhering to rigorous industry standards, the 16 inches Edge Length PEWRL1600 from Pasternack guarantees reliability and exceptional signal reflectivity. These come standard with a 1/4-20 UNC threaded hole facilitates straightforward and secure mounting to a tripod, enabling versatile deployment across various testing and measurement scenarios. Whether utilized in research, development, or field applications, Pasternack's PEWRL1600 exemplifies precision engineering. Our trihedral corner reflectors are part of over 40,000 RF, microwave, and millimeter wave components from Pasternack available worldwide and ship same day. |
| 1 | ||
| PE3W16007 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. MHV Male to SHV Jack Cable Using LMR-195 Coax. PE3W16007 is a MHV male to SHV jack cable using LMR-195 coax. This Pasternack MHV male to SHV jack cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm SHV for connector 2. Our male MHV to jack SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16007 MHV male to SHV jack cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C0231-600CM | Pasternack Enterprises |
| 0 | |||
| PE3W21600 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to SMA Female Cable Using LMR-195 Coax. PE3W21600 is a 1.0/2.3 male right angle to SMA female cable using LMR-195 coax. This Pasternack 1.0/2.3 male right angle to SMA female cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm SMA for connector 2. 1.0/2.3 right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21600 1.0/2.3 male right angle to SMA female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16009LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMC Plug Cable Using RG405 Coax, LF Solder. PE3W16009LF is a SMA male to SMC plug cable using RG405 coax. This Pasternack SMA male to SMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our male SMA to plug SMC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16009LF SMA male to SMC plug cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W16009/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SMC Plug Cable Using RG405 Coax with HeatShrink. PE3W16009/HS is a SMA male to SMC plug cable using RG405 coax. This Pasternack SMA male to SMC plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMC for connector 2. Our male SMA to plug SMC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16009/HS SMA male to SMC plug cable assembly is constructed with RG405 coax. | 0 | |||
| PE3W16000 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MCX Plug Right Angle Cable Using PE-SR405AL Coax. PE3W16000 is a SMA female bulkhead to MCX plug right angle cable using PE-SR405AL coax. This Pasternack SMA female bulkhead to MCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. SMA to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to plug MCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W16000 SMA female bulkhead to MCX plug right angle cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W16001/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Female 4 Hole Flange to 75 Ohm BNC Male Cable Using 75 Ohm RG187 Coax with HeatShrink. PE3W16001/HS is a BNC female 4 hole flange to BNC male cable using RG187 coax. This Pasternack BNC female 4 hole flange to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our female BNC 4 hole flange to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W16001/HS BNC female 4 hole flange to BNC male cable assembly is constructed with RG187 coax. | 0 | |||
| PE3C1600 | Pasternack Enterprises | 0 | ||||
 Venkel Ltd. | C01005HQN160-0R4ANP | VENKEL LTD | High-Q NP0 Capacitor;01005;HQN;16V;0.4pF;�0.05pF RoHS : Compliant | 0 | ||
| MELFC0102-UE-1600DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;160R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TC-1600BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;160R;�0.1% RoHS : Compliant | 0 | |||
| HPTF0603-QN-1600DT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�10PPM;160R;�0.5% RoHS : Compliant | 0 | |||
| HPTF0805-RP-1600UT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;160R;�0.01% RoHS : Compliant | 0 | |||
| PWCR0805-RK-1600FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;160R;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XC-1600CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�50PPM;160R;�0.25% RoHS : Compliant | 0 | |||
| MELFM0204-TE-1600DT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�25PPM;160R;�0.5% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZC-1600FT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�50PPM;160R;�1% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZE-1600BT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�25PPM;160R;�0.1% RoHS : Not Compliant | 0 | |||
| HPTF0805-TE-1600DT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;160R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1206-UE-1600AT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�25PPM;160R;�0.05% RoHS : Compliant | 0 | |||
| HPTF2010-UC-1600AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;160R;�0.05% RoHS : Compliant | 0 | |||
| CR2010-1W-1600FT | VENKEL LTD | Chip Resistor;2010;1W;160R;�1% RoHS : Compliant | 0 | |||
| AGCR0402-RK-1600DT | VENKEL LTD | Auto Grade Resistor;0402;1/8W;�100PPM;160R;�0.5% RoHS : Compliant | 0 | |||
 Win Source Electronics | BH1600FVC-TR | ROHM Semiconductor | IC AMBIENT LIGHT SENSOR WSOF6 RoHS : Compliant |
| 31,005 | |
LMR16006YDDCT | Texas Instruments | IC REG BUCK ADJ 0.6A 6SOT / Conv DC-DC 4V to 60V Step Down Single-Out 0.8V to 55V 0.6A Automotive 6-Pin TSOT-23 T/R RoHS : Compliant |
| 28,580 | ||
| 43025-1600 | Molex | CONN RECEPT 16POS 3MM DUAL ROW RoHS : Compliant |
| 20,000 | ||
| NX5032GA-16.000M-STD-CSU-2 | Nihon Dempa Kogyo Co Ltd | CRYSTAL 16.0000MHZ 8PF SMD / 16 MHz ±50ppm Crystal 8pF 120 Ohms 2-SMD, No Lead RoHS : Compliant |
| 20,000 | ||
BQ771600DPJR | Texas Instruments | IC BATT PROT LI-ION 2-4CEL 8WSON RoHS : Compliant |
| 19,060 | ||
0430451600 | Molex | CONN HEADER R/A 16POS 3MM / Connector Header Through Hole, Right Angle 16 position 0.118" (3.00mm) RoHS : Compliant |
| 16,770 | ||
| BTA41-600B | STMicroelectronics | TRIAC 600V 40A TOP3 RoHS : Compliant |
| 13,200 | ||
BTA41-600BRG | STMicroelectronics | TRIAC 600V 40A TOP3 RoHS : Compliant |
| 12,180 | ||
| LMR16006YQ3DDCRQ1/LMR16006YQ3DDCTQ1 | Texas Instruments |
| 10,390 | |||
BD11600NUX-E2 | ROHM Semiconductor | IC USB SWITCH DPDT 10-VSON RoHS : Compliant |
| 9,293 | ||
| TCMT1600T3 | Vishay Huntington | OPTOISOLATOR 3.75KV TRANS 4SOP |
| 9,210 | ||
XC3S1600E-4FGG320C | AMD Xilinx | IC FPGA 250 I/O 320FBGA RoHS : Compliant |
| 8,196 | ||
MAX16008TP+ | Maxim Integrated Products | Supervisor Open Drain or Open Collector 4 Channel 20-TQFN (4x4) RoHS : Compliant |
| 2,500 | ||
ABM7-16.000MHZ-D2Y-T | Abracon Corporation | CRYSTAL 16.0000MHZ 18PF SMD RoHS : Compliant |
| 700 | ||
ADC12D1600CIUT | Texas Instruments | IC ADC 12BIT FOLD INTERP 292BGA RoHS : Not Compliant |
| 70 | ||
 Wuhan P&S | SF1600-TAP | Vishay Intertechnologies | 1600V,1A,Ultrafast Avalanche Diode RoHS : Compliant |
| 167,500 | |
| 71600-026LF | Amphenol FCi | IDC Receptacle,Double row,26 P,2.54mm RoHS : Compliant |
| 1,080 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand