| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty.
BuyNow |
ComSIT USA | S5P216W119G1
| IAUTOMATION | AVAILABLE EU | | 5
 |
Braemac Americas-Symmetry | IC-WESO16W
| iC-Haus | 3-Channel 75 Ohm Line Driver | | 1
 |
RS916WS00AC1A3R
| Silicon Laboratories Inc | Multiprotocol Modules 802.11 b/g/n (2.4 GHz),802.11j, and dual-mode Bluetooth 5.4 | | 1
|
MAX1016.W.001
| Taoglas Antenna Solutions | 16-in-1 Permanent Mount Antenna White with Multiband GNSS, 8 5G/4G, 6 Wi-Fi & 1 LMR Whip with Staggered Cable Pigtails. | | 0
|
RS9116W-SB00-QMS-B2A
| Silicon Laboratories Inc | RS9116 Wi-Fi NCP SoCs | | 0
|
RS9116W-SB00-B00-B2A
| Silicon Laboratories Inc | RS9116 Single Band Wi-Fi NCP Module
RoHS : Compliant | | 0
|
Chip-Germany GmbH | CAV24C16WE-GT3
| | | | 5,000
|
FDH Electronics | WIRE-ST16WVLPR
| WORLD CLASS WIRE AND CABLE | Hook-Up Wire | 1 : $0.302
5 : $0.302
10 : $0.302
25 : $0.302
50 : $0.302
100 : $0.302
250 : $0.302
500 : $0.257
1,000 : $0.22
2,500 : $0.212
10,000 : $0.205
|
| 833
|
M85049/118S16W
| Amphenol PCD | Connector Acc | 1 : $55.398
5 : $55.398
10 : $48.881
25 : $46.165
50 : $46.165
100 : $44.516
250 : $42.981
500 : $42.981
1,000 : $41.549
2,500 : $41.549
10,000 : $40.208
|
| 104
|
5D0154-2216W1
| Glenair Inc | Backshells & Ac | | 6
|
PCIC16W7F400A1
| Amphenol Positronic | Connector | 1 : $57.018
5 : $53.153
10 : $47.515
25 : $46.806
50 : $46.806
100 : $46.118
250 : $44.8
500 : $43.556
1,000 : $42.959
2,500 : $42.959
10,000 : $42.959
|
| 0
|
PLC16W4M300A1
| Amphenol Positronic | Connector
RoHS : Not Compliant | 1 : $65.6
5 : $61.153
10 : $54.667
25 : $53.851
50 : $53.851
100 : $53.059
250 : $51.543
500 : $50.111
1,000 : $49.425
2,500 : $49.425
10,000 : $49.425
|
| 0
|
PLC16W4F0000
| Amphenol Positronic | Connector | 1 : $20.491
5 : $19.102
10 : $17.076
25 : $16.821
50 : $16.821
100 : $16.574
250 : $16.1
500 : $15.653
1,000 : $15.438
2,500 : $15.438
10,000 : $15.438
|
| 0
|
PLC16W4M0000/AA
| Amphenol Positronic | Connector | 1 : $20.491
5 : $19.102
10 : $17.076
25 : $16.821
50 : $16.821
100 : $16.574
250 : $16.1
500 : $15.653
1,000 : $15.438
2,500 : $15.438
10,000 : $15.438
|
| 0
|
M85049/118S16W
| Glenair Inc | Backshells & Ac
RoHS : Not Compliant | 1 : $582.222
5 : $582.222
10 : $513.725
25 : $485.185
50 : $485.185
100 : $467.857
250 : $451.724
500 : $451.724
1,000 : $436.667
2,500 : $436.667
10,000 : $422.581
|
| 0
|
M85049/144-16W08-4
| Amphenol PCD | Backshells & Ac | | 0
|
M85049/146-16W03
| Amphenol PCD | Backshells & Ac | | 0
|
M85049/2916W04
| Amphenol PCD | Backshells & Ac | 1 : $59.672
5 : $59.672
10 : $52.652
25 : $49.727
50 : $49.727
100 : $47.951
250 : $46.297
500 : $46.297
1,000 : $44.754
2,500 : $44.754
10,000 : $43.31
|
| 0
|
M85049/2916W04
| Glenair Inc | Connector
RoHS : Not Compliant | 1 : $825.836
5 : $769.847
10 : $688.197
25 : $677.925
50 : $677.925
100 : $667.956
250 : $648.871
500 : $630.847
1,000 : $622.205
2,500 : $622.205
10,000 : $622.205
|
| 0
|
M85049/3716W05D
| Glenair Inc | Backshells & Ac | 1 : $1,259.711
5 : $1,259.711
10 : $1,111.51
25 : $1,049.759
50 : $1,049.759
100 : $1,012.268
250 : $977.362
500 : $977.362
1,000 : $944.783
2,500 : $944.783
10,000 : $914.306
|
| 0
|
M85049/144-16W08-3
| Amphenol PCD | Backshells & Ac | | 0
|
M85049/2916W03
| Glenair Inc | Connector Acc
RoHS : Not Compliant | 1 : $1,007.378
5 : $1,007.378
10 : $888.863
25 : $839.481
50 : $839.481
100 : $809.5
250 : $781.586
500 : $781.586
1,000 : $755.533
2,500 : $755.533
10,000 : $731.161
|
| 0
|
Flip Electronics | RS9116W-SB00-QMS-B2AR
| Silicon Laboratories Inc | Stock, Ship Today | | 367,500
|
BAS16WT1G
 | onsemi | Stock, Ship Today
RoHS : Compliant | | 18,000
|
CAV24C16WE-GT3
 | onsemi | Stock, Ship Today
RoHS : Compliant | | 17,000
|
BAS16W115
| NXP Semiconductors | Stock, Ship Today | | 12,500
|
S9S08RN16W2VTJR
| NXP Semiconductors | Stock
RoHS : Compliant | | 12,500
|
S9S08RNA16W2MLC
| NXP Semiconductors | Stock
RoHS : Compliant | | 5,000
|
CAT24C16WI-G
| onsemi | Stock, Ship Today
RoHS : Compliant | | 5,000
|
CAT24C16WI-GT3
| onsemi | Stock, Ship Today
RoHS : Compliant | | 3,000
|
LC75816WS-8722-E
| onsemi | Stock, Ship Today | | 1,200
|
RS9116W-SB00-AA0-X2AR
| Silicon Laboratories Inc | Stock | | 1,077
|
RS9116W-SB00-AA1-X2AR
| Silicon Laboratories Inc | Stock, Ship Today | | 630
|
DF2215TE16WV
| Renesas Electronics Corporation | Stock | | 324
|
LC75816WS-8723-E
| onsemi | Stock, Ship Today | | 300
|
RS9116W-SB00-QMS-B2A
| Silicon Laboratories Inc | Stock, Ship Today | | 10
|
Maritex | HL-A-3014H416W-S1-08L-HR3 5000K 3-STEP
| Hongli Zhihui Group Co LTD | LED HL-A-3014H416W-S1-08L-HR3; SMD; 3014 PLCC2; neutral white 5000K; CRI min. 80; 11.5-12lm/30mA; 2.6-3.2V; diffused; 120 degrees; 3.0x1.4x0.7mm | 4,000 : $0.019
1,000 : $0.022
100 : $0.024
1 : $0.026
|
| 93,384
|
HL-A-3014H416W-S1-08L-HR3 6500K 3-STEP
| Hongli Zhihui Group Co LTD | LED HL-A-3014H416W-S1-08L-HR3; SMD; 3014 PLCC2; cool white; 6500K; 12.5-13.5lm/30mA; 2.6-3.2V; diffused; 120 degrees; 3.0x1.4x0.7mm | 4,000 : $0.019
1,000 : $0.022
100 : $0.025
1 : $0.026
|
| 87,525
|
HL-A-3014H416W-S1-08L-HR3 4000K 3-STEP
| Hongli Zhihui Group Co LTD | LED HL-A-3014H416W-S1-08L-HR3; SMD; 3014 PLCC2; neutral white; 4000K; 12.5-13.5lm/30mA; 2.6-3.2V; diffused; 120 degrees; 3.0x1.4x0.7mm | 4,000 : $0.019
1,000 : $0.022
100 : $0.024
1 : $0.026
|
| 33,769
|
HL-A-3014H416W-S1-08L-HR3 3000K 3-STEP
| Hongli Zhihui Group Co LTD | LED HL-A-3014H416W-S1-08L-HR3; SMD; 3014 PLCC2; warm white; 3000K; 11.5-12.5lm/30mA; 2.6-3.2V; diffused; 120 degrees; 3.0x1.4x0.7mm | 4,000 : $0.019
1,000 : $0.022
100 : $0.024
1 : $0.026
|
| 30,693
|
M16-W
| BEISIT | Flat gasket, M16x1,5mm , for GLAND-M1610B-5-10-1 | 100 : $0.082
10 : $0.115
1 : $0.156
|
| 3,909
|
DS16W
| Shikues Semiconductor | Schottky Diodes; DS16W; SHIKUES; 700 mV; 300 �A; 40 A; Yes | 30,000 : $0.013
9,000 : $0.016
3,000 : $0.02
1 : $0.064
|
| 3,000
|
BAS16W
| Yangzhou Yangjie Electronics Co Ltd | Rectifier Diodes & Bridges; BAS16W; YANGJIE; 3; 175 mA
RoHS : Compliant | 6,000 : $0.008
1,000 : $0.009
300 : $0.011
100 : $0.012
10 : $0.015
1 : $0.073
|
| 2,460
|
BC807-16W,115
 | Nexperia | Bipolar Transistors (BJT); BC807-16W,115; NEXPERIA; PNP
RoHS : Compliant | 3,000 : $0.017
300 : $0.019
100 : $0.02
30 : $0.022
10 : $0.03
1 : $0.037
|
| 1,191
|
BAS16WSQ
| Yangzhou Yangjie Electronics Co Ltd | Rectifier Diodes & Bridges; BAS16WSQ; YANGJIE | 6,000 : $0.012
1,000 : $0.013
300 : $0.014
100 : $0.017
10 : $0.02
1 : $0.101
|
| 1,010
|
NVF4-1CZ30ADC12V1.6W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 30A; coil voltage 12VDC; changeover contact (1C); 30A/14VDC | 500 : $0.87
100 : $0.972
20 : $1.074
5 : $1.202
1 : $1.279
|
| 641
|
NVF4-1CZ30ADC24V1.6W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 30A; coil voltage 24VDC; changeover contact (1C); 30A/14VDC | 500 : $0.972
100 : $1.202
20 : $1.304
5 : $1.407
1 : $1.483
|
| 370
|
NVF4-2CZ30ADC12V1.6W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 30A; coil voltage 12VDC; changeover contact (1C); 30A/14VDC; with mounting bracket | 500 : $1.079
100 : $1.215
20 : $1.271
1 : $1.353
|
| 358
|
NVF4-2CZ30ADC24V1.6W
| Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 30A; coil voltage 24VDC; changeover contact (1C); 30A/14VDC; with mounting bracket | 500 : $0.921
100 : $0.998
20 : $1.151
5 : $1.279
1 : $1.407
|
| 300
|
BAS16WS
| Yangzhou Yangjie Electronics Co Ltd | Rectifier Diodes & Bridges; BAS16WS; YANGJIE; 2; 250 mA; 100 V
RoHS : Compliant | 6,000 : $0.007
1,000 : $0.008
300 : $0.009
100 : $0.011
10 : $0.013
1 : $0.064
|
| 72
|
EG-S48D24-L-V20W90 16W 6500K
| NiViss | LED strip; Lens type 2-LED mono white; vertical bending; cool white 6500K; CRI min. 90; 24V; width 12mm; height: 6.2 mm; 16W/m; 48LED/m; IP20; cut every 41.7mm; red black cable / 5 meter reel | | 2
|
Pasternack Enterprises US | PE3C0616/WP-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-24 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-24 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
|
| 0
|
PE3C8816/WH-72
| Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. | 1 : $49.49
25 : $47.02
50 : $44.54
100 : $42.56
|
| 0
|
PE3C0616/WP-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-48 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-48 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45
|
| 0
|
PE3C8816/WH-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-12, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-12 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax. | 1 : $42.79
25 : $40.65
50 : $38.51
100 : $36.8
|
| 0
|
PE3C8816/WH-300
| Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-300, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-300 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax. | 1 : $85.59
25 : $81.31
50 : $77.03
100 : $73.61
|
| 0
|
PE3C0616/WP-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-60 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-60 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11
|
| 0
|
PE3C8816/WH-120
| Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-120 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax. | 1 : $65.29
25 : $62.03
50 : $58.76
100 : $56.15
|
| 0
|
PE3C0616/WP
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 0
|
PE3C8816/WH
| Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-WH coax. | | 0
|
PE3C0616/WP-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 SMA Male (Plug) to TNC Male (Plug) Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to TNC male (plug) low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0616/WP-36 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0616/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C0616/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0616/WP-36 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73
|
| 0
|
PE3C8816/WH-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/WH-36, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/WH-36 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax. | 1 : $45.59
25 : $43.31
50 : $41.03
100 : $39.21
|
| 0
|
TE Connectivity | ANT-916-WRT-UFL
| TE Connectivity | Antenna Dome 916MHz 1.32 216 UFL Antenna Type: Dome/Puck Band Type: Single Band Primary Application: LPWAN LoRaWAN Communication Protocol: Wi-Fi LPWAN LoRaWAN Mounting Location: External Dome/Puck Single Band LPWAN Wi-Fi | TE Connectivity
RoHS : Compliant | 1,000 : $20.82
500 : $21.41
250 : $22.07
100 : $22.81
50 : $23.47
1 : $25.76
|
| 1,004
|
ANT-916-WRT-SMA
| TE Connectivity | Antenna Dome Compact 916MHz RG174 SMA Antenna Type: Dome/Puck Band Type: Single Band Primary Application: LPWAN LoRaWAN Communication Protocol: LoRaWAN Wi-Fi LPWAN Mounting Location: External Dome/Puck Single Band LPWAN LoRaWAN | TE Connectivity
RoHS : Compliant | 1,000 : $19.94
500 : $20.51
250 : $21.14
100 : $21.85
50 : $22.49
1 : $24.68
|
| 869
|
ANT-916-WRT-RPS
| TE Connectivity | Antenna Dome Compact 916MHz RG174 RPS Antenna Type: Dome/Puck Band Type: Single Band Primary Application: LoRaWAN LPWAN Communication Protocol: Wi-Fi LoRaWAN LPWAN Mounting Location: External Dome/Puck Single Band LoRaWAN Wi-Fi | TE Connectivity
RoHS : Compliant | 500 : $13.13
250 : $13.78
1 : $14.28
|
| 374
|
ANT-916-WRT-UFL-150
| TE Connectivity | Antenna Dome 916MHz 1.32 150 UFL Antenna Type: Dome/Puck Band Type: Single Band Primary Application: LPWAN LoRaWAN Communication Protocol: LoRaWAN Wi-Fi LPWAN Mounting Location: External Dome/Puck Single Band LPWAN LoRaWAN | TE Connectivity
RoHS : Compliant | 1,000 : $17.58
500 : $18.08
250 : $18.64
100 : $19.27
50 : $19.83
1 : $21.76
|
| 332
|
Venkel Ltd. | CR0402-16W-1372FT
| VENKEL LTD | Chip Resistor;0402;1/16W;13.7K;�1%
RoHS : Compliant | | 110,000
|
CR0402-16W-2100FT
| VENKEL LTD | Chip Resistor;0402;1/16W;210R;�1%
RoHS : Compliant | | 20,000
|
CR0402-16W-2551FT
| VENKEL LTD | Chip Resistor;0402;1/16W;2.55K;�1%
RoHS : Compliant | | 10,000
|
CR0402-16W-000T-13
| VENKEL LTD | Chip Resistor;0402;1/16W;0R
RoHS : Compliant | | 0
|
CR0402-16W-1002FT
| VENKEL LTD | Chip Resistor;0402;1/16W;10K;�1%
RoHS : Compliant | | 0
|
CR0402-16W-104JT
| VENKEL LTD | Chip Resistor;0402;1/16W;100K;�5%
RoHS : Compliant | | 0
|
CR0402-16W-13R7DT
| VENKEL LTD | Chip Resistor;0402;1/16W;13.7R;�0.5%
RoHS : Compliant | | 0
|
CR0402-16W-1400DT
| VENKEL LTD | Chip Resistor;0402;1/16W;140R;�0.5%
RoHS : Compliant | | 0
|
CR0402-16W-1741FT
| VENKEL LTD | Chip Resistor;0402;1/16W;1.74K;�1%
RoHS : Compliant | | 0
|
CR0402-16W-18R2DT
| VENKEL LTD | Chip Resistor;0402;1/16W;18.2R;�0.5%
RoHS : Compliant | | 0
|
CR0402-16W-1R0JT
| VENKEL LTD | Chip Resistor;0402;1/16W;1R;�5%
RoHS : Compliant | | 0
|
CR0402-16W-2003DT
| VENKEL LTD | Chip Resistor;0402;1/16W;200K;�0.5%
RoHS : Compliant | | 0
|
CR0402-16W-2210DT
| VENKEL LTD | Chip Resistor;0402;1/16W;221R;�0.5%
RoHS : Compliant | | 0
|
CR0402-16W-2373DT
| VENKEL LTD | Chip Resistor;0402;1/16W;237K;�0.5%
RoHS : Compliant | | 0
|
CR0402-16W-2742DT
| VENKEL LTD | Chip Resistor;0402;1/16W;27.4K;�0.5%
RoHS : Compliant | | 0
|
Wuhan P&S | U77A16WH2081
| TE Connectivity | - | 1 : $6.11
100 : $5.9
500 : $5.77
1,000 : $5.66
|
| 6,000
|
CAT24C16WE-GT3
| onsemi | 16K Microwire Compatible Serial EEPROM
RoHS : Compliant | 1 : $0.53
100 : $0.34
500 : $0.28
1,000 : $0.26
|
| 3,400
|
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand