| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
18PF-11P66-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() ComSIT USA | 5ESDV18P | Dinkle Enterprises | AVAILABLE EU | 656 | ||
| NJSW172ATCX4P18P19 | Nichia Corporation | AVAILABLE EU | 7,636 | |||
![]() PUI | 7918-PIN-M-10K | 10,000 | ||||
![]() Pasternack Enterprises US | PE3W02818/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using RG142 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle cable using RG142 coax with 180 deg. clock from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA male right angle cable using RG142 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W02818/PH180, can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02818/PH180 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable using RG142 coax with 180 deg. clock. | 0 | ||
| PE3C8318/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to N Male Right Angle Cable Using TFT-5G-402 Coax with 180 Deg. Clock. PE3C8318/PH180 is a 4.3-10 male right angle to N male right angle cable using TFT-5G-402 coax. This Pasternack 4.3-10 male right angle to N male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm N for connector 2. 4.3-10 right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C8318/PH180 4.3-10 male right angle to N male right angle cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3W03818/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to SMP Female Right Angle Cable Using PE-SR047FL Coax with 180 Deg. Clock. PE3W03818/PH180 is a SMP female right angle to SMP female right angle cable using PE-SR047FL coax. This Pasternack SMP female right angle to SMP female right angle cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. SMP right angle to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03818/PH180 SMP female right angle to SMP female right angle cable assembly is constructed with PE-SR047FL coax. | 0 | |||
| PE3C1818/PH90 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Female Right Angle Bulkhead to SMA Male Right Angle Cable Using LMR-200 Coax with 90 Deg. Clock. PE3C1818/PH90 is a TNC female right angle bulkhead to SMA male right angle cable using LMR-200 coax. This Pasternack TNC female right angle bulkhead to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC right angle bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1818/PH90 TNC female right angle bulkhead to SMA male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W00118/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Male Right Angle Cable Using LMR-100 Coax with 180 Deg. Clock. PE3W00118/PH180 is a BNC male right angle to BNC male right angle cable using LMR-100A coax. This Pasternack BNC male right angle to BNC male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00118/PH180 BNC male right angle to BNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W10718/PH180 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Male Right Angle Cable Using LMR-400 Coax with 180 Deg. Clock. PE3W10718/PH180 is a TNC male right angle to N male right angle cable using LMR-400 coax. This Pasternack TNC male right angle to N male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10718/PH180 TNC male right angle to N male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C100101-8P-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female to 2.92mm Male Cable 12 Inch Length Using PE-P047 Coax, 8 Position., Pasternack’s PE3C100101-8P-12 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8P-12 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8P-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This 8-position RF cable assembly is pre-installed into the connector housing. This PE3C100101-8P-12 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8P-12 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8P-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Mini SMP Female to 2.92mm Male Cable 18 Inch Length Using PE-P047 Coax, 8 Position., Pasternack’s PE3C100101-8P-18 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8P-18 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8P-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This 8-position RF cable assembly is pre-installed into the connector housing. This PE3C100101-8P-18 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8P-18 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8P-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Female to 2.92mm Male Cable 24 Inch Length Using PE-P047 Coax, 8 Position., Pasternack’s PE3C100101-8P-24 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8P-24 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8P-24 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This 8-position RF cable assembly is pre-installed into the connector housing. This PE3C100101-8P-24 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8P-24 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8P-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Mini SMP Female to 2.92mm Male Cable 36 Inch Length Using PE-P047 Coax, 8 Position., Pasternack’s PE3C100101-8P-36 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8P-36 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8P-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This 8-position RF cable assembly is pre-installed into the connector housing. This PE3C100101-8P-36 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8P-36 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8P-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female to 2.92mm Male Cable 6 Inch Length Using PE-P047 Coax, 8 Position., Pasternack’s PE3C100101-8P-6 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8P-6 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8P-6 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This 8-position RF cable assembly is pre-installed into the connector housing. This PE3C100101-8P-6 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8P-6 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8PK1-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMPM Female to 2.92mm Male Cable 12 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-8PK1-12 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8PK1-12 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8PK1-12 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100101-8PK1-12 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8PK1-12 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8PK1-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMPM Female to 2.92mm Male Cable 18 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-8PK1-18 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8PK1-18 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8PK1-18 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100101-8PK1-18 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8PK1-18 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8PK1-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMPM Female to 2.92mm Male Cable 24 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-8PK1-24 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8PK1-24 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8PK1-24 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100101-8PK1-24 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8PK1-24 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100101-8PK1-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 2.92mm Male Cable 36 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-8PK1-36 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8PK1-36 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100101-8PK1-36 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8PK1-36 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | X2118PHT | Analog Devices Inc | Analog Circuit | 10,850 | ||
| X2118PFT | Analog Devices Inc | Analog Circuit | 9,818 | |||
| X2118PFD | Analog Devices Inc | Analog Circuit | 9,776 | |||
| X2118PLT | Analog Devices Inc | Analog Circuit | 9,276 | |||
| X2118PTT | Analog Devices Inc | Analog Circuit | 8,981 | |||
TPS5618PWPR![]() | Texas Instruments | Switching Controller, Current-mode, 2A, 200kHz Switching Freq-Max, PDSO28 RoHS : Not Compliant | 8,644 | |||
| TPS5618PWPRG4 | Texas Instruments | Switching Controller, Voltage-mode, 0.5A, 200kHz Switching Freq-Max, PDSO28 RoHS : Compliant | 8,542 | |||
TPS5618PWPG4![]() | Texas Instruments | Switching Controller, Current-mode, 2A, 200kHz Switching Freq-Max, PDSO28 RoHS : Compliant | 6,965 | |||
| TPS3610T18PWR | Texas Instruments | Power Management Circuit, PDSO14 RoHS : Not Compliant | 5,842 | |||
| X2118PET | Analog Devices Inc | Analog Circuit | 5,422 | |||
TPS3610U18PWRG4![]() | Texas Instruments | Power Supply Management Circuit, Adjustable, 2 Channel, +1.6V, PDSO14 RoHS : Compliant | 4,417 | |||
| TPS65218PHP | Texas Instruments | Power Supply Support Circuit, Adjustable, 7 Channel, PQFP48 | 3,727 | |||
TPS3610U18PWG4![]() | Texas Instruments | Power Supply Management Circuit, Adjustable, 2 Channel, +1.6V, PDSO14 RoHS : Compliant | 3,442 | |||
| XC1718-PC20C | AMD Xilinx | Configuration Memory, 18144X1, CMOS, PQCC20 RoHS : Not Compliant | 3,137 | |||
| XC1718-PD8C | AMD Xilinx | Configuration Memory, 18144X1, CMOS, PDIP8 RoHS : Not Compliant | 1,466 | |||
![]() Win Source Electronics | TLV74018PDBVR![]() | Texas Instruments | IC REG LINEAR 1.8V 300MA SOT23-5 RoHS : Compliant |
| 850,860 | |
| BLM18PG331SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD 330 OHM 0603 1LN RoHS : Compliant |
| 600,000 | ||
| BLM18PG121SH1 | Murata Manufacturing Co Ltd | Ferrite Bead 120Ohm 100MHz 0603 RoHS : Compliant |
| 300,000 | ||
| BLM18PG181SH1D | Murata Manufacturing Co Ltd | FERRITE BEAD 180 OHM 0603 1LN RoHS : Compliant |
| 240,000 | ||
LQM18PN2R2MGHD![]() | Murata Manufacturing Co Ltd | FIXED IND 2.2UH 1.05A 250MOHM SM RoHS : Compliant |
| 180,000 | ||
TLV70718PDQNR![]() | Texas Instruments | IC REG LDO 1.8V 0.2A 4X2SON RoHS : Compliant |
| 120,000 | ||
DRV8818PWPR![]() | Texas Instruments | IC MOTOR DRIVER PAR 28HTSSOP RoHS : Compliant |
| 81,460 | ||
| NTLUS3A18PZTCG | onsemi | MOSFET P-CH 20V 8.2A UDFN RoHS : Compliant |
| 39,230 | ||
LT1963AEST-1.8#PBF![]() | Linear Technology | IC REG LDO 1.8V 1.5A SOT223 RoHS : Compliant |
| 22,970 | ||
| BLM18PG600SH1D | Murata Manufacturing Co Ltd | FERRITE BEAD 60 OHM 0603 1LN RoHS : Compliant |
| 10,600 | ||
LT1764AEQ-1.8#PBF![]() | Linear Technology | LDO Regulator Pos 1.8V 3A Automotive 6-Pin(5+Tab) DDPAK Tube / IC REG LDO 1.8V 3A 5DDPAK RoHS : Compliant |
| 5,590 | ||
LT1763IDE-1.8#PBF![]() | Linear Technology | IC REG LDO 1.8V 0.5A 12DFN / LDO Regulator Pos 1.8V 0.5A Automotive 12-Pin DFN EP Tube RoHS : Compliant |
| 2,380 | ||
| IRFP7718PBF | Infineon Technologies AG | MOSFET N-CH 75V 195A TO247AC RoHS : Compliant |
| 2,180 | ||
| LTC2328IMS-18#PBF | Analog Devices Inc | IC ADC 18BIT SAR 16MSOP / 18 Bit Analog to Digital Converter 1 Input 1 SAR 16-MSOP RoHS : Compliant |
| 247 | ||
| LTC2385IUH-18#PBF | Analog Devices Inc | IC ADC 18BIT SAR 32QFN RoHS : Compliant |
| 180 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |